HidrateSpark 3 User manual

Welcome to the Hidrate Spark 3
Quick Start Guide.
Breathe easy—we’ve made it short and simple. Let’s do this!

In your box, you
should have:
A. Lid
B. Soft Grip Body
C. Sensor Stick
D. Finger Loop
E. Battery
F. Bottom Ring
A
B C D
E
F

PARTS USED IN STEP:
B. Soft Grip Body
C. Sensor
F. Bottom Ring
STEP 1:
Turn bottle upside down and unscrew the battery cover
from the base of the bottle.
turn right – tighten turn left – loosen
B
F
C

STEP 2:
Once the battery cover is removed insert battery
into sensor.
The sensor will illuminate with a startup sequence.
PARTS USED IN STEP:
E. Battery
F. Bottom Ring
negative
–
+
positive
E
F

STEP 3:
Lastly, secure battery cover back on base of bottle.
DO NOT overtighten the screw when reassembling.
Overtightening may cause damage to the product.
12
PARTS USED IN STEP:
B. Soft Grip Body
C. Sensor Stick
F. Bottom Ring
B
F
C

STEP 4:
Make sure the arrow on the seal and on the inside of the
lid are facing the same direction to prevent leakage.
PARTS USED IN STEP:
A. Lid
A

STEP 5:
To attach the nger loop, slide it underneath the metal
pin on the back of the lid and loop it through itself.
PARTS USED IN STEP:
A. Lid
D. Finger Loop
A D

STEP 6:
Download our free Hidrate Spark Smart Water Bottle
app from the App Store or Google Play store.
Check that you have an internet connection and your
Bluetooth is turned on. Follow the steps in the app to
create an account, set parameters for a personalized
hydration goal, add your bottle to your prole, and set
your push notications and glow reminders.
PARTS USED IN STEP:
Mobile Phone
Hidrate Spark
Smart Bottle App

STEP 7: last step
Set down your bottle after every rell. Remember to
sync the app near the bottle each day so your water is
tracked correctly.
PARTS USED IN STEP:
You!
Hidrate Spark 3
Hidrate Spark Smart
Water Bottle App

CLEANING INSTRUCTIONS
Wash thoroughly before rst use.
RINSE IMMEDIATELY AFTER EACH USE with the lid in
the open position.
PARTS USED IN STEP:
A. Lid
B. Soft Grip Body
A B

CLEANING INSTRUCTIONS
Lid and Bottom Ring are Top-Rack dishwasher safe.
PARTS USED IN STEP:
A. Lid
F. Bottom Ring
A
F

CLEANING INSTRUCTIONS
The Sensor Stick and Body of the bottle are HAND
WASH ONLY.
PARTS USED IN STEP:
B. Soft Grip Body
C. Sensor Stick
B C

CLEANING INSTRUCTIONS
ALWAYS STORE BOTTLE WITH LID, BOTTOM RING
and SENSOR STICK REMOVED to allow parts to
dry completely.
PARTS USED IN STEP:
A. Lid
B. Soft Grip Body
C. Sensor Stick
F. Bottom Ring
A
BC
F

CONTACT AND MORE
We’re here to support you.
If you ever need to contact us, here’s how:
Chat with us on our website
hidratespark.com
Email
[e-mail]
In App
Settings > Help
For more information and best practices,
please visit hidratespark.com/pages/guide
to review the user manual.
ATTENTION:
• Your Hidrate Spark bottle uses one CR2477
Lithium battery. During the battery replacement
process these batteries represent choking hazard.
• Product is NOT designed for hot liquids. Use only
with cold liquids.
• Adding ice can cause an inaccurate measurement.
• Not for use with carbonated or pulpy beverages.
• Prior to drinking, make sure the lid is properly
threaded to the body and screwed on completely.
• DO NOT overll. Fill liquids to the ll line or below
to avoid accidental spilling.
• DO NOT microwave or freeze.
• DO NOT use cleaners containing bleach, chlorine,
abrasives and/or harsh chemicals.
• DO NOT continue to use if product is damaged.
• DO NOT carry bottles containing liquid in bags to
help prevent accidental opening.