High Sec Labs FH10N-4 User manual

FH10N-4/FC10N-4 , UE10N-3 | QUICK INSTALLATION GUIDE
©2019 All rights reserved. HSL logo and product names are trademarks or service trademarks of HighSecLabs Ltd (HSL).
All other marks are the property of their respective owners. Images for demonstration purposes only. HDC20403 Rev.1
ELOCK OVERVIEW
Open USB ports expose computers, servers and corporate networks to numerous security threats. HSL’s eLock offers a
comprehensive security solution for USB lockdown and control.
Objectives
•This guide includes instructions for installing HSL’s FH10N-4, FC10N-4, UE10N-3 USB eLock device family.
•HSL’s HID filter (FH10N-4) allows secure, unidirectional connection of USB keyboard and mouse. The eLock USB HID
Filter blocks all USB traffic except standard keyboard and mouse.
•The Configurable Filter version (FC10N-4) allows secure connection of two administrator-approved USB devices
based on VID/PID characteristics. By default the configurable filter will allow the use of USB authentication device.
•The USB eLock Plug (UE10N-3) - A mechanical USB port cup that physically locks individual USB ports.
For further assistance please refer to HSL website: http://www.highseclabs.com
Quick Installation Guide
HSL’s USB eLock Solution
Installation
•Connect the eLock devices to the PC based on the type of USB devices you would like to use.
•Note: Once installed it is impossible to remove the device from the USB port!
•Whenever protecting a PC, It is highly recommended to use at least one configurable filter and one HID filter.
•Block all other open ports with the USB eLock plugs.
•Note: Configurable filter configuration will allow the administrator to create a white list and black list rules, allowing
and preventing specific USB devices. This configuration is not covered by the manual.

FH10N-4/FC10N-4 , UE10N-3 | QUICK INSTALLATION GUIDE
©2019 All rights reserved. HSL logo and product names are trademarks or service trademarks of HighSecLabs Ltd (HSL).
All other marks are the property of their respective owners. Images for demonstration purposes only. HDC20403 Rev.1
Safety and Regulatory Statements
Safety Symbols
This one or more of the following symbols may be included in your
product documentation and/or on the product.
Instructions: This symbol is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the product user manual.
Dangerous Voltage: This symbol is intended to alert the user
to the presence of uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
Power On: This symbol indicates the principal on/off switch
is in the ON position.
Power Off: This symbol indicates the principal on/off switch
is in the OFF position.
Protective Grounding Terminal: This symbol indicates a
terminal which must be connected to earth ground prior to
making any other connections to the equipment.
Safety Precautions
WARNING: To avoid a potentially fatal shock hazard and possible damage to
equipment, please observe the following precautions.
•Instructions: Do not disable the power grounding plug. The
grounding plug is an important safety feature.
•Plug the power cord into a grounded (earthed) outlet that is
easily accessible at all times.
•Disconnect the power from the product by unplugging the
power cord from either the electrical outlet or the USB Port. The
AC inlet is the main disconnect for removing power to this
product. For products that have more than one AC inlet, to
remove power completely, all AC line cords must be
disconnected.
•This product has no serviceable parts inside the product
enclosure. Do not open or remove product cover.
CAUTION: Some HSL products contain a lithium battery. This battery is not a
field replaceable item, and replacement should not be attempted by a user.
If errors occur when using the product and the battery is suspected, contact
HSL Technical Support.
WARNING: For Service Personnel Only - There is a risk of explosion if the
battery is replaced with an incorrect type. Dispose of used batteries
according to the manufacturer’s instructions.
This product is for use with other products that are Listed or
Certified by a Nationally Recognized Testing Laboratory (NRTL).
NIAP Protection Profile
This product is certified to the NIAP Protection Profile PSD version
4.0 certification for peripheral sharing switch devices.
Installation Precautions
Do not connect this product to computing devices that:
•are TEMPEST computers
•include telecommunication equipment
•include frame grabber video cards
•include special audio processing cards.
WARNING: Peripherals' Warning - For security reasons, this product does
not support wireless keyboards. It is recommended not to connect a
microphone or headset to the audio output port.
Security Vulnerability
If you are aware of a potential security vulnerability while installing
this product, contact Technical Support immediately by:
•Web form: www.highseclabs.com/support/case/
•Email: securit[email protected]om
•Tel: [phone]
WARNING: Unit Enclosure Warning - If the unit’s enclosure appears disrupted
or if all LEDs flash continuously, remove the product from service immediately
and contact Technical Support.
Change Management
For change management tracking, perform a quarterly log check to
verify that the RFD was not improperly used to override the current
device policy by an unauthorized person.