GRI DA-2 User manual

MADE IN U.S.A.
 Sounds Instantly When Door Opens
 Choice Of 2, 4 or 6 Second Sounding Time
 Choice Of Three Volume Settings
 Remote Sounders Available
 Monitors One Or More Openings
 Surface Mount Or Recessed
 SPDT Relay Output
 Standard Color Is White
 Battery Power and/or External Power
THE GRI Door Alert Annuniciator is designed to signal customer entry into a business establishment.
A closed loop magnetic reed switch activates the Door Alert. It can be set by the installer for a two,
four or six second sounding time. Offered in a recessed version (easily mounted in a single gang
box) or as a surface mount version. Both units can be powered by an external 12 volt DC power
source or 9 volt battery.
NOTE: Unit will function at minimum 7VDC at a very limited sounder volume. This power level is
considered total battery failure.
CAUTION: To prevent a memory failure or circuit damage, external power source must not exceed
15 VDC.
DA-1
Recessed
CLOSED LOOP
DOOR ALERT
ANNUNCIATOR
PART NUMBERS DESCRIPTION
DA-1 Recessed Door Alert Annunciator - Closed Loop
DA-2 Surface Mount Door Alert Annunciator - Closed Loop
184-2 Recessed Remote Sounder
184-7 Surface Mount Remote Sounder
DWG • 516- 933-4900 • dwgdistribution.com

INSTALLATION INSTRUCTIONS:
WARRANTY:
One year warranty against workmanship, material and factory defects.
THE GRI Door Alert Annunciator monitors an entry by sounding instantly when the door is opened. It
will sound for two, four or six seconds (jumper selectable) and can be wired to a 12 volt external power
source or a 9 volt battery. Remote sounders can be added to cover isolated areas such as a stock room. If
two doors are present, such as a regular door and a screen door, it is suggested that the switch be placed on
the outermost door to allow the regular door to remain open for ventilation when desired. Using this
method, the GRI Door Alert Annunciator will continue to monitor the entry way.
When two or more separate doors are to be monitored by installing individual switch sets on each door,
the GRI Door Alert Annunciator will detect each door opening. CLOSED LOOP switches are required
when installing the DA-1 or DA-2 GRI Door Alert Annunciator. Contact your GRI Distributor for the nec-
essary switches or call the factory for more information.
The recessed version of the GRI Door Alert Annunciator is designed to fit into a single gang outlet box.
The surface mount version can be easily mounted on an existing structure.
For custom options, please consult the factory.
DA-1 DA-2
DOOR ALERT
ANNUNCIATOR
DWG • 516- 933-4900 • dwgdistribution.com