HiHi Deskphone User manual

What’s in the boxes?
GETTING STARTED WITH YOUR HiHi
Power Supply Unit Power Cord
Tablet
Below is a list of everything you need to get set up with your HiHi.
Tablet restraining bolts are also supplied if needed.
Base Unit Receiver Curly Cord

What’s in the boxes?
GETTING STARTED
Setting up your deskphone
GETTING STARTED WITH YOUR HiHiGETTING STARTED WITH YOUR HiHi
1) Connect the power cord to the power supply unit as pictured.
Power
Supply
Unit
Power Cord
2) The Power Supply Unit Lead can now be plugged into the base unit, as pictured.
If you are connecting your deskphone via your own Ethernet Cable, now would be the perfect time to connect
that too, as shown.
PC
Power Supply
Unit Lead
Ethernet
Cable

What’s in the boxes?
GETTING STARTED
Setting up your deskphone
GETTING STARTED WITH YOUR HiHiGETTING STARTED WITH YOUR HiHi
3) The curly cord and receiver can be connected; simply plug the shorter end of the curly cord into the receiver.
The curly cord, with receiver attached, can then be connected directly into the base unit.
4) Once the above steps are complete, plug the power socket into a power outlet and switch on.
PC
Receiver
Receiver
Curly Cord