HIK VISION DS-KABH6320-T User manual

Network Indoor Staon
Conguraon Guide

Legal Informaon
©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product.
Pictures, charts, images and all other informaon hereinaer are for
descripon and explanaon only. The informaon contained in the Manual
is subject to change, without noce, due to rmware updates or other
reasons. Please nd the latest version of this Manual at the Hikvision
website ( hps://www.hikvision.com/ ).
Please use this Manual with the guidance and assistance of professionals
trained in supporng the Product.
Trademarks
and other Hikvision's trademarks and logos are the
properes of Hikvision in various jurisdicons.
Other trademarks and logos menoned are the properes of their
respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL
AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND
FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”.
HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR
FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS
AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR
ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR
LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT,
TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
Network Indoor Staon Conguraon Guide
i

CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR
INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY
RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION
WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE
LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE
CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE,
FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE
RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND
OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY
PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION
OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN
THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR
FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATER PREVAILS.
Network Indoor Staon Conguraon Guide
ii

Symbol Convenons
The symbols that may be found in this document are dened as follows.
Symbol Descripon
Danger Indicates a hazardous situaon which, if not avoided, will or
could result in death or serious injury.
Cauon Indicates a potenally hazardous situaon which, if not
avoided, could result in equipment damage, data loss,
performance degradaon, or unexpected results.
Note Provides addional informaon to emphasize or
supplement important points of the main text.
Network Indoor Staon Conguraon Guide
iii

Contents
1 Local Operaon .......................................................................................... 1
1.1 Acvate Indoor Staon ..................................................................................... 1
1.2 Conguraon Sengs ....................................................................................... 1
1.2.1 Set Indoor Staon Network Parameters ................................................... 2
1.2.2 Set Linked Device IP .................................................................................. 2
1.2.3 Set Indoor Staon No. .............................................................................. 4
1.2.4 SIP Sengs ............................................................................................... 5
1.2.5 Add Camera .............................................................................................. 6
1.2.6 Zone and Alarm Sengs ........................................................................... 6
1.3 Password Sengs ............................................................................................. 8
1.4 Synchronize Time .............................................................................................. 9
1.5 Sound Sengs ................................................................................................. 10
1.5.1 Call Sengs ............................................................................................ 10
1.5.2 Volume Sengs ...................................................................................... 12
1.6 Link to the Mobile Client ................................................................................. 12
1.7 Restore Indoor Staon .................................................................................... 12
1.8 System Maintenance ....................................................................................... 13
1.9 Device Informaon .......................................................................................... 15
2 Remote Operaon via the client soware ............................................... 16
2.1 Acvate Device Remotely ............................................................................... 16
2.2 Device Management ....................................................................................... 16
2.2.1 Add Video Intercom Devices .................................................................. 17
Network Indoor Staon Conguraon Guide
iv

2.2.2 Modify Network Informaon ................................................................. 19
2.3 System Conguraon ...................................................................................... 20
2.4 Remote Conguraon ..................................................................................... 20
2.4.1 System .................................................................................................... 20
2.4.2 Video Intercom ....................................................................................... 25
2.4.3 Network .................................................................................................. 32
2.5 Person Management ....................................................................................... 34
2.5.1 Organizaon Management ..................................................................... 35
2.5.2 Person Management .............................................................................. 36
A. Communicaon Matrix and Device Command ....................................... 40
Network Indoor Staon Conguraon Guide
v

1 Local Operaon
1.1 Acvate Indoor Staon
You can only congure and operate the indoor staon aer creang a password for
the device acvaon.
Steps
1. Power on the device. It will enter the acvaon page automacally.
Figure 1-1 Acvaon Page
2. Create a password and conrm it.
3. Tap OK to acvate the indoor staon.
Note
We highly recommend you to create a strong password of your own choosing
(using a minimum of 8 characters, including at least three kinds of following
categories: upper case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product. And we
recommend you change your password regularly, especially in the high security
system, changing the password monthly or weekly can beer protect your
product.
1.2 Conguraon Sengs
Network Indoor Staon Conguraon Guide
1

Conguraon sengs is required before starng using the indoor staon. It is
necessary to set the indoor staon network, room No., linked devices, device me
display, and so on.
1.2.1 Set Indoor Staon Network Parameters
Network connecon is mandatory for the use of the indoor staon. Set the network
parameters aer acvang the indoor staon. Only when the IP address of the
indoor staon is in the same network segment as other devices, it can work properly
in the same system.
Steps
Note
The default IP address of the indoor staon is 192.0.0.64.
Two ways are available for you to set IP address: DHCP, and set IP address manually.
1. Tap Sengs → → Conguraon , and enter admin (acvaon) password.
2. Tap to enter the network sengs page.
Figure 1-2 Network Sengs
3. Set the network parameters.
-Enable DHCP, and the system can assign an IP address of the indoor staon
automacally.
-Disable the DHCP funcon, and set the IP address manually. You should set
the device IP address, the gateway, the DNS address.
1.2.2 Set Linked Device IP
Network Indoor Staon Conguraon Guide
2

Linked network parameters refers to the network parameters of devices (like door
staon, doorphone, main staon, center, etc.), to which the indoor staon is linked.
Linked devices for the indoor staon refers to door staon, center, main staon, and
doorphone.
With the private SIP protocol, intercom can be realized only when all these devices
are in the same network segment with the indoor staon.
With the standard SIP protocol, intercom can be realized when all these devices
support the standard SIP protocol.
Steps
Note
•The doorphone does not support adding with the standard SIP protocol.
•Here take door staon network sengs as example.
1. Tap Sengs → → Conguraon , and enter admin (acvaon) password.
2. Tap to enter the device management page.
Figure 1-3 Device Management Page
3. Tap Indoor Extension and select a connect indoor extension.
4. Tap Main Door Staon to pop up the device informaon dialog.
Network Indoor Staon Conguraon Guide
3

Figure 1-4 Device Informaon
Restore the door staon via indoor staon.
Tap to restore the parameters of the door staon.
Modify the IP address of the linked door staon.
Tap to edit the IP address of door staon.
5. Select the device to link. Edit the network parameters.
1.2.3 Set Indoor Staon No.
Indoor staon No. and the indoor extension No. are numbers, which can be dialed
by other devices to call the indoor staon and the indoor extension in an intercom
system. The indoor staon No., is composed of the oor No. and the room No.
The indoor extension No. Should be a numeric from 1 to 5.
Up to 5 indoor extensions can be set for 1 indoor staon.
Steps
1. Tap Sengs → → Conguraon , and enter admin (acvaon) password.
2. Tap to enter the indoor staon sengs page.
Network Indoor Staon Conguraon Guide
4

Figure 1-5 Set Indoor Staon Informaon
3. Select Indoor Staon Type from Indoor Staon or Indoor Extension according to
your actual needs.
-Indoor Staon: You can set the indoor staon's room informaon, including
the room name, community No., building No., Unit No., oor, and room No.,
the live view duraon, the SIP register password, and the SIP parameters.
-Indoor Extension: You can set the indoor extension's room informaon,
including the room name and the extension No., live view duraon, and the
SIP register password.
4. Tap Room Informaon and set room name, community No., building No., unit
No., oor No., and room No. according to your actual needs.
1.2.4 SIP Sengs
Devices can communicate with each other via SIP protocol. You create set the SIP
register password, enable standard SIP and set VIOP account.
Steps
1. Tap Sengs → → Conguraon , and enter admin (acvaon) password.
2. Set SIP register password.
1) Tap SIP register password.
2) Create a new SIP register password and conrm the password.
3) Tap OK.
3. Oponal: Enable standard SIP.
1) Tap SIP Sengs.
Network Indoor Staon Conguraon Guide
5

2) Enable Enable Standard SIP.
3) Tap VOIP Account Sengs and congure the account informaon, including
the user name, the phone number, the registered user name, the password,
the domain, the port No,, and the expiraon date.
Note
Up to 32 characters are allowed in the user name.
1.2.5 Add Camera
Steps
1. Tap Sengs → → Conguraon , and enter admin (acvaon) password.
2. Tap to enter the device management page.
3. Tap + to pop up the dialog box.
4. Select HIK Protocol and you can add the camera depended on the HIK protocol.
5. Enter the device name and IP address.
6. Enter the device user name and the password of the camera.
7. Exit the page to save the sengs.
1.2.6 Zone and Alarm Sengs
Zone Sengs
You can set the zone type, alarm type and delay me and other parameters of 8
zones.
Before You Start
Tap Sengs → → Shortcut Sengs , and enable Alarm.
Steps
Note
Arming status page and zone sengs page are hidden by default. You should enable
alarm funcon rst.
1. Tap Sengs → → Zone Sengs to enter the zone sengs page.
Network Indoor Staon Conguraon Guide
6

Figure 1-6 Zone Sengs
2. Press a zone to pop up the zone eding dialogue box.
3. Set the zone type, alarm type, status of arming status, entering delay, and exing
delay.
4. Tap OK to save the sengs.
Note
•7 zone types are selectable: Panic Buon, Door Magnec, Smoke Detector,
Acve Infrared, Passive Infrared, Gas Detector, and Doorbell.
•3 alarm types are selectable: 24h Alarm, Instant Alarm, and Delay Alarm.
Set the alarm type as 24h alarm, and the zone will be armed for 24h.
Set the alarm type as instant alarm, and the zone will alarm once it's
triggered.
Set the alarm type as delay alarm, and you should set the entering delay
duraon and exing delay duraon.
•Both the entering delay duraon and the exing delay duraon are from 30s
to 60s.
•For Gas Detector and Smoke Detector, the alarm type is set as default 24h
alarm. The alarm type of them can not be changed.
Arming Mode Sengs
4 arming modes can be congured: stay mode, away mode, sleeping mode and
custom mode.
Network Indoor Staon Conguraon Guide
7

Before You Start
Tap Sengs → → Shortcut Sengs to enable Alarm.
Steps
Note
On the home page, the arming status funcon and zone sengs funcon are hidden
by default. You should enable the alarm funcon rst.
1. Back to the home page, tap Sengs → → Scene Sengs to enter the arming
mode sengs page.
2. Tap Stay Mode, Away Mode, Sleeping Mode, or Custom to enter the page.
Figure 1-7 Arming Mode Sengs
3. Arm the selected zone.
Note
•Zones are congurable on the arming mode page.
•24H alarm zone including smoke detector zone and gas detector zone will be
triggered even if they are disabled.
•Arming mode sengs should be congured with the sengs of arming
status on the user page of the device.
1.3 Password Sengs
Network Indoor Staon Conguraon Guide
8

You can create and edit the arm/disarm password, duress code and unlock password
of the indoor staon.
Steps
1. Tap Sengs → → Password to enter the password sengs page.
2. Tap Arm/Disarm, Unlock or Duress Code to pop up the password sengs dialog
box.
Arm/Disarm
The password is for arming or disarming the zone for the indoor staon.
Note
By default, the Arm/Disarm page is hidden. Tap Sengs → → Shortcut
Sengs and enable Alarm. And the Arm/Disarm page will be displayed.
Unlock
Create the indoor staon's unlock password. If the device has connected to a
lock, enter the password to unlock.
Duress Code
When you are hijacked and forced to open the door, you can enter the
duress code. An alarm will be triggered to nofy the management center
secretly.
Note
The duress code and the unlock password cannot be the same.
3. Enter the old password.
4. Create a new password and conrm it.
5. Tap OK to save the sengs.
1.4 Synchronize Time
Steps
1. Tap Sengs → → Time and Date → Sync Time to enter the me
synchronizaon page.
Network Indoor Staon Conguraon Guide
9

Figure 1-8 Time Synchronizaon
2. Enable Enable NTP.
3. Set the synchronizing interval, enter the IP address/domain of NTP server and
port No., and select the me zone.
Note
•The default unit of synchronizing interval is minute.
•The me zone can be congured as well if the NTP is not enabled.
1.5 Sound Sengs
Set the ringtone sound and the volume.
1.5.1 Call Sengs
You can set the ringtone, ring duraon, call forwarding me on call sengs page.
Steps
1. Tap Sengs → to enter the call sengs page.
Network Indoor Staon Conguraon Guide
10

Figure 1-9 Call Sengs
2. Set corresponding parameters.
Ringtone
There are 3 ringtones by default, and you can custom and import at most 4
ringtones via Batch Conguraon Tool or iVMS-4200 Client Soware.
Ringtone Duraon: The maximum duraon of indoor staon when it is called
without being accepted. Ringtone duraon ranges from 30 s to 60 s.
Calling Duraon
The call will end automacally when the actual calling duraon is longer
than the congured one. Calling duraon ranges from 30 s to 60 s.
Call Forwarding
The ring duraon limit beyond which the call is automacally forwarded to
the mobile phone designated by the resident. Call forwarding ranges from 0
s to 20 s.
Other Sengs
You can set the Do Not Disturb funcon.
Do Not Disturb Device
Select All and all devices will not disturb this device. Select Indoor
Staon and all indoor staon will not disturb this device.
Do Not Disturb
Set the do not disturb schedule. Select Close and the do not disturb
funcon will not be enabled. Select All Day and this device will not be
disturbed all day. Select Schedule and you can set the do not disturb
Network Indoor Staon Conguraon Guide
11

me duraon. Within the congured me, this device will not be
disturbed.
Note
Indoor extension does not support the ring duraon sengs, call forwarding
sengs, or auto-answer funcon.
1.5.2 Volume Sengs
Set the microphone volume, prompt sound volume, call volume, and enable touch
sound.
Steps
1. Tap Sengs → → Volume Sengs to enter the volume sengs page.
2. Set the microphone volume, prompt sound volume, and the call volume. You can
also enable Touch Sound to turn on the key sound.
1.6 Link to the Mobile Client
Steps
1. Tap Sengs → → Hik-Connect Service Sengs to enter the sengs page.
2. Enable Enable Hik-Connect Service.
3. Edit LBS server and Vericaon Code.
Note
Vericaon code is used to add the device to mobile client.
4. Oponal: Scan QR code on the screen to add the device to the mobile client.
1.7 Restore Indoor Staon
Steps
1. Tap Sengs → → Conguraon , and enter admin (acvaon) password.
2. Tap to enter the system maintenance page.
3. Tap Restore Default Sengs to restore the default sengs and reboot the
system.
Network Indoor Staon Conguraon Guide
12

4. Tap Restore All to restore all parameters and reboot the system.
1.8 System Maintenance
You can format or install TF card, clear the screen, view the version informaon of
the indoor staon and reboot the system on the system maintenance page.
Tap Sengs → to enter the general sengs page.
Figure 1-11 General Sengs Page
Password
Create the device unlock password and the duress code
Unlock
Create the indoor staon's unlock password. If the device has connected to a
lock, enter the password to unlock.
Duress Code
When you are hijacked and forced to open the door, you can enter the
congured duress code. An alarm will be triggered to nofy the
management center secretly.
Note
The duress code and the unlock password cannot be the same.
Time and Date
You can set the displayed me and date format, current me. You can also tap
Sync Time and enable NTP to synchronize the device me.
Network Indoor Staon Conguraon Guide
13

Note
•Make sure your device is connected with the network or the NTP funcon
will not available.
•For details, see Synchronize Time.
System Language
Tap System Language to change the system language.
Note
The indoor staon supports 11 languages.
Brightness Adjustment
Tap + or - to adjust the screen brightness.
Clean Screen
Enable Clear Screen and the screen will be locked for 30s. And you can clear the
screen within the me duraon.
Note
•Aer enabling Clear Screen funcon, press and hold the Unlock key to exit
the clear screen mode.
•The device without unlock key will exit the clear screen mode automacally
when the me is out.
TF Card
Tap TF Card to view the TF card and you can also format the TF card.
Tap Sengs → to enter the system maintenance page.
Reboot Device
Tap Reboot Device to reboot the system.
Upgrade
Tap Conguraon, and enter the admin (acvaon) password.
Tap → Upgrade to get the upgrade package online.
Wizard
Tap Conguraon, and enter the admin (acvaon) password.
Tap → Wizard and set the language, network, indoor staon type, device No.,
and select a device according to the wizard.
Tap Sengs → to enter the preference page.
Network Indoor Staon Conguraon Guide
14