HIK VISION DS-KD8003-IME2 User manual

Video Intercom Two-Wire Bundle
User Manual

Legal Informaon
©2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product.
Pictures, charts, images and all other informaon hereinaer are for
descripon and explanaon only. The informaon contained in the Manual
is subject to change, without noce, due to rmware updates or other
reasons. Please nd the latest version of this Manual at the Hikvision
website ( hps://www.hikvision.com/ ).
Please use this Manual with the guidance and assistance of professionals
trained in supporng the Product.
Trademarks
and other Hikvision's trademarks and logos are the
properes of Hikvision in various jurisdicons.
Other trademarks and logos menoned are the properes of their
respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL
AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND
FIRMWARE, ARE PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS".
HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR
FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS
AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR
ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR
LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT,
TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
Video Intercom Two-Wire Bundle User Manual
i

CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR
INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY
RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION
WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE
LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE
CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE,
FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE
RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND
OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY
PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION
OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN
THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR
FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATTER PREVAILS.
Video Intercom Two-Wire Bundle User Manual
ii

Symbol Convenons
The symbols that may be found in this document are dened as follows.
Symbol Descripon
Danger Indicates a hazardous situaon which, if not avoided, will or
could result in death or serious injury.
Cauon Indicates a potenally hazardous situaon which, if not
avoided, could result in equipment damage, data loss,
performance degradaon, or unexpected results.
Note Provides addional informaon to emphasize or
supplement important points of the main text.
Video Intercom Two-Wire Bundle User Manual
iii

Safety Instrucon
Warning
●All the electronic operaon should be strictly compliance with the electrical safety
regulaons, re prevenon regulaons and other related regulaons in your local
region.
●Please use the power adapter, which is provided by normal company. The power
consumpon cannot be less than the required value.
●Do not connect several devices to one power adapter as adapter overload may
cause over-heat or re hazard.
●Please make sure that the power has been disconnected before you wire, install or
dismantle the device.
●When the product is installed on wall or ceiling, the device shall be rmly xed.
●If smoke, odors or noise rise from the device, turn o the power at once and
unplug the power cable, and then please contact the service center.
●If the product does not work properly, please contact your dealer or the nearest
service center. Never aempt to disassemble the device yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)
Cauon
●Do not drop the device or subject it to physical shock, and do not expose it to high
electromagnesm radiaon. Avoid the equipment installaon on vibraons
surface or places subject to shock (ignorance can cause equipment damage).
●Do not place the device in extremely hot (refer to the specicaon of the device
for the detailed operang temperature), cold, dusty or damp locaons, and do not
expose it to high electromagnec radiaon.
●The device cover for indoor use shall be kept from rain and moisture.
●Exposing the equipment to direct sun light, low venlaon or heat source such as
heater or radiator is forbidden (ignorance can cause re danger).
●Do not aim the device at the sun or extra bright places. A blooming or smear may
occur otherwise (which is not a malfuncon however), and aecng the
endurance of sensor at the same me.
Video Intercom Two-Wire Bundle User Manual
iv

●Please use the provided glove when open up the device cover, avoid direct contact
with the device cover, because the acidic sweat of the ngers may erode the
surface coang of the device cover.
●Please use a so and dry cloth when clean inside and outside surfaces of the
device cover, do not use alkaline detergents.
●Please keep all wrappers aer unpack them for future use. In case of any failure
occurred, you need to return the device to the factory with the original wrapper.
Transportaon without the original wrapper may result in damage on the device
and lead to addional costs.
●Improper use or replacement of the baery may result in hazard of explosion.
Replace with the same or equivalent type only. Dispose of used baeries
according to the instrucons provided by the baery manufacturer.
●Input voltage should meet both the SELV and the Limited Power Source according
to 60950-1 standard.
●The power supply must conform to LPS. The recommended adaptor models and
manufacturers are shown as below. Use the aached adapter, and do not change
the adaptor randomly.
Model Manufacturer Standard
ADS-24S-12 1224GPCN SHENZHEN HONOR
ELECTRONIC CO.,LTD
CEE
G0549-240-050 SHENZHEN GOSPELL DIGITAL
TECHNOLOGY CO.,LTD
CEE
TS-A018-120015Ec SHENZHEN TRANSIN
TECHNOLOGIES CO., LTD
CEE
Video Intercom Two-Wire Bundle User Manual
v

Regulatory Informaon
FCC Informaon
Please take aenon that changes or modicaon not expressly approved
by the party responsible for compliance could void the user's authority to
operate the equipment.
FCC compliance: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protecon against harmful
interference in a residenal installaon. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instrucons, may cause harmful interference to radio
communicaons. However, there is no guarantee that interference will not
occur in a parcular installaon. If this equipment does cause harmful
interference to radio or television recepon, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help
This equipment should be installed and operated with a minimum distance
20cm between the radiator and your body.
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is subject to
the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operaon.
Video Intercom Two-Wire Bundle User Manual
vi

EU Conformity Statement
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable
harmonized European standards listed under the EMC Direcve
2014/30/EU, RE Direcve 2014/53/EU,the RoHS Direcve 2011/
65/EU
2012/19/EU (WEEE direcve): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the
European Union. For proper recycling, return this product to your
local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collecon points. For more informaon
see: www.recyclethis.info
2006/66/EC (baery direcve): This product contains a baery
that cannot be disposed of as unsorted municipal waste in the
European Union. See the product documentaon for specic
baery informaon. The baery is marked with this symbol,
which may include leering to indicate cadmium (Cd), lead (Pb),
or mercury (Hg). For proper recycling, return the baery to your
supplier or to a designated collecon point. For more informaon
see:www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operaon is subject to the following two condions:
1. this device may not cause interference, and
2. this device must accept any interference, including interference that may
cause undesired operaon of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radioexempts de licence. L'exploitaon est autorisée aux deux
condions suivantes :
Video Intercom Two-Wire Bundle User Manual
vii

1. l'appareil ne doit pas produire de brouillage, et
2. l'ulisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est suscepble d'en compromere le
fonconnement.
Under Industry Canada regulaons, this radio transmier may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmier by Industry Canada. To reduce potenal radio interference to
other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communicaon.
Conformément à la réglementaon d'Industrie Canada, le présent émeeur
radio peut fonconner avec une antenne d'un type et d'un gain maximal (ou
inférieur) approuvé pour l'émeeur par Industrie Canada. Dans le but de
réduire les risques de brouillage radioélectrique à l'intenon des autres
ulisateurs, il faut choisir le type d'antenne et son gain de sorte que la
puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité
nécessaire à l'établissement d'une communicaon sasfaisante.
This equipment should be installed and operated with a minimum distance
20cm between the radiator and your body.
Cet équipement doit être installé et ulisé à une distance minimale de 20
cm entre le radiateur et votre corps.
Video Intercom Two-Wire Bundle User Manual
viii

Contents
1 About this Maunal ...................................................................................... 1
2 Appearance ................................................................................................ 2
3 Terminal and Wiring Descripon ................................................................ 7
3.1 Terminal Descripon ......................................................................................... 7
3.2 Wiring Descripon ............................................................................................ 9
4 Installaon ................................................................................................ 11
4.1 Install Indoor Staon ....................................................................................... 11
4.1.1 Congure Indoor Staon Address .......................................................... 11
4.1.2 Wall Mounng ........................................................................................ 12
4.2 Install Door Staon ......................................................................................... 14
4.2.1 Congure Sub Module Address .............................................................. 14
4.2.2 One-Module Installaon ......................................................................... 16
4.2.3 Two-Module Installaon ......................................................................... 23
4.2.4 Three-Module Installaon ...................................................................... 31
4.2.5 More-Than-Three Module Installaon ................................................... 39
4.3 Install Network Distributor .............................................................................. 52
4.4 Install Analog Distributor ................................................................................ 53
5 Acvaon ................................................................................................. 55
5.1 Connect to Network ........................................................................................ 55
5.1.1 Connect to Wired Network ..................................................................... 55
5.1.2 Connect to Wireless Network ................................................................. 55
5.2 Acvate Device via Client Soware ................................................................. 55
Video Intercom Two-Wire Bundle User Manual
ix

5.3 Acvate via SADP ............................................................................................ 56
5.4 Acvate Device via Web .................................................................................. 57
6 Remote Conguraon via Web ................................................................ 59
6.1 Login and Logout ............................................................................................. 59
6.1.1 Log in the Web ........................................................................................ 59
6.1.2 Logout ..................................................................................................... 59
6.2 Quick Conguraon ........................................................................................ 59
6.3 Device Management ....................................................................................... 60
6.4 Conguraon .................................................................................................. 60
6.4.1 System Sengs ....................................................................................... 61
6.4.2 Network Sengs .................................................................................... 63
6.4.3 Intercom Sengs .................................................................................... 64
A. Cables ...................................................................................................... 66
B. Communicaon Matrix and Device Command ....................................... 68
Video Intercom Two-Wire Bundle User Manual
x

1 About this Maunal
Get the manual and related soware from or the ocial website (hp://
www.hikvision.com).
Product Model
Two-Wire Door Staon DS-KD8003-IME2
Two-Wire Indoor Staon DS-KH1201
Network Distributor DS-KAD7040
Analog Distributor DS-KAD1040
Video Intercom Two-Wire Bundle User Manual
1

2 Appearance
Two-Wire Door Staon
Figure 2-1 Front and Side Panel
Table 2-1 Appearance Descripon
No. Descripon
1 Microphone
2 Low Illuminaon IR Supplement Light
3 Built-in Camera
4 Loudspeaker
5 Call Buon
6 Nametag
7 TAMPER
Video Intercom Two-Wire Bundle User Manual
2

Figure 2-2 Boom Panel
Table 2-2 Appearance Descripon
No. Descripon
8 Network Interface
9Module-connecng Interface (output)
10 Terminals
Two-Wire Indoor Staon
Figure 2-3 Appearance of Indoor Staon
Table 2-3 Descripon
No. Descripon No. Descripon
1 Screen 8 Live View/Switch
2 Microphone 9 Terminals
3 Volume- 10 Loudspeaker
Video Intercom Two-Wire Bundle User Manual
3

No. Descripon No. Descripon
4 Volume+ 11 Four-Wire Terminal
5 Receive/Decline 12 DIP Switch
6 Unlock Door 2 13 Debugging Port
7 Unlock Door 1 14 Jumper
Note
The Debugging Port is used for debugging only.
Network Distributor
Figure 2-4 Appearance of Distributor
Video Intercom Two-Wire Bundle User Manual
4

Table 2-4 Descripon
No. Descripon No. Descripon
1 Cascade Input & Output
(Reserved)
5 Network Interface
2 Cascade Channels 6 Power Indicator
3 Power Input 7 Cascade Indicator
4 Reset Buon 8 Network Interface
(Supports for PoE Output)
Note
The appearance may vary according to dierent device models. Refers to
the actual device.
Analog Distributor
Figure 2-5 Appearance of Distributor
Video Intercom Two-Wire Bundle User Manual
5

Table 2-5 Descripon
No. Descripon No. Descripon
1 Cascade Output Terminal
1
4 Cascade Output Terminal
4
2 Cascade Output Terminal
2
5 Two-Wire Input Terminal
3 Cascade Output Terminal
3
6 Two-Wire Output
Terminal
Video Intercom Two-Wire Bundle User Manual
6

3 Terminal and Wiring Descripon
3.1 Terminal Descripon
Two-Wire Main Unit Terminal
Figure 3-1 Two-Wire Main Unit Terminal
Table 3-1 Descripons of Terminals and Interfaces
No. Interface Descripon
A1 NC1 Door Lock Relay Output (NC)
A2 NO1 Door Lock Relay Output (NO)
A3 COM Common Interface
A4 NC2 Door Lock Relay Output (NC)
A5 NO2 Door Lock Relay Output (NO)
A6 GND Grounding
A7 12 VDC Reserved
A8 GND Grounding
B1 AIN2 For the access of Door Magnec 2
B2 AIN1 For the access of Door Magnec 1
Video Intercom Two-Wire Bundle User Manual
7

No. Interface Descripon
B3 AIN3 For the access of Exit Buon 1
B4 AIN4 For the access of Exit Buon 2
B5 485- Module-connecng Interface
B6 485+
B7 12 V OUT
B8 GND
C Two-Wire Interface Two-Wire Interface
Two-Wire Indoor Staon
Figure 3-2 Terminal of Indoor Staon
Table 3-2 Descripons of Terminal and Interfaces
Interface Descripon
L1+ For the access of BUS
L1-
L2+ For the access of indoor staon
L2-
Video Intercom Two-Wire Bundle User Manual
8

3.2 Wiring Descripon
Typical applicaon of the system is shown as below.
Figure 3-3 Wiring
Note
●Up to 10 indoor staons can be connected hand-by-hand.
●Up to 150 indoor staons can be connected to one terminal of the distributor.
●When connecng the doorbells to indoor staons, up to 85 indoor staons can be
connected to one terminal of the distributor.
Cauon
Make sure all the related equipment is power-o during the wiring and installaon.
Two-Wire door staon should be connected to CH1 (48 V,15 W) of the distributor
with 2-wire cables.
Two-Wire Analog Distributor should be connected to any terminal of CH2 to CH5 (48
V,15 W) of the distributor with 2-wire cables.
Network door staon can be connected to LAN(PoE) of the distributor with Network
Cable.
1 distributor can only connect 1 door staon to build the communicaon.
The distributor supports standard PoE.
Video Intercom Two-Wire Bundle User Manual
9