HIK VISION DS-KB8112-IM User manual

Video Intercom Vandal-Resistant
Door Station
Quick Start Guide
UD03855B-B

Video Intercom Vandal-Resistant Door Station·Quick Start Guide
ii
Quick Start Guide
© 2017 Hangzhou Hikvision Digital Technology Co., Ltd.
This quick start guide is intended for users of the models below:
Series
Model
Vandal-Resistant Door Station
DS-KB8112-IM
It includes instructions on how to use the Product. The software
embodied in the Product is governed by the user license agreement
covering that Product.
About this Manual
This Manual is subject to domestic and international copyright
protection. Hangzhou Hikvision Digital Technology Co., Ltd.
(“Hikvision”) reserves all rights to this manual. This manual cannot be
reproduced, changed, translated, or distributed, partially or wholly,
by any means, without the prior written permission of Hikvision.
Trademarks
and other Hikvision marks are the property of
Hikvision and are registered trademarks or the subject of applications
for the same by Hikvision and/or its affiliates. Other trademarks
mentioned in this manual are the properties of their respective
owners. No right of license is given to use such trademarks without
express permission.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF

Video Intercom Vandal-Resistant Door Station·Quick Start Guide
iii
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
REGARDING THIS MANUAL. HIKVISION DOES NOT WARRANT,
GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE USE
OF THE MANUAL, OR THE CORRECTNESS, ACCURACY, OR RELIABILITY
OF INFORMATION CONTAINED HEREIN. YOUR USE OF THIS MANUAL
AND ANY RELIANCE ON THIS MANUAL SHALL BE WHOLLY AT YOUR
OWN RISK AND RESPONSIBILITY.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO
EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR
AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
SECURITY BREACHES, OR LOSS OF DATA OR DOCUMENTATION, IN
CONNECTION WITH THE USE OF OR RELIANCE ON THIS MANUAL,
EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF LIABILITY OR CERTAIN DAMAGES, SO SOME OR ALL OF
THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU.
Support
Should you have any questions, please do not hesitate to contact
your local dealer.

Video Intercom Vandal-Resistant Door Station·Quick Start Guide
iv
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:

Video Intercom Vandal-Resistant Door Station·Quick Start Guide
v
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied
accessories too are marked with "CE" and comply
therefore with the applicable harmonized European
standards listed under the EMC Directive 2014/30/EU, the RoHS
Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with
this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see:
www.recyclethis.info
2006/66/EC (battery directive): This product contains
a battery that cannot be disposed of as unsorted
municipal waste in the European Union. See the
product documentation for specific battery
information. The battery is marked with this symbol, which may
include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).
For proper recycling, return the battery to your supplier or to a
designated collection point. For more information see:
www.recyclethis.info
Industry Canada ICES-003 Compliance

Video Intercom Vandal-Resistant Door Station·Quick Start Guide
vi
This device meets the CAN ICES-3 (B)/NMB-3(B) standards
requirements.

Video Intercom Vandal-Resistant Door Station·Quick Start Guide
vii
Safety Instruction
These instructions are intended to ensure that user can use the
product correctly to avoid danger or property loss.
The precaution measure is divided into Warnings and Cautions:
Warnings: Neglecting any of the warnings may cause serious injury or
death.
Cautions: Neglecting any of the cautions may cause injury or
equipment damage.
Warnings
All the electronic operation should be strictly compliance with the
electrical safety regulations, fire prevention regulations and other
related regulations in your local region.
Please use the power adapter, which is provided by normal
company. The power consumption cannot be less than the
required value.
Do not connect several devices to one power adapter as adapter
overload may cause over-heat or fire hazard.
Warnings Follow these
safeguards to prevent
serious injury or death.
Cautions Follow these
precautions to prevent
potential injury or material
damage.

Video Intercom Vandal-Resistant Door Station·Quick Start Guide
viii
Please make sure that the power has been disconnected before
you wire, install or dismantle the device.
When the product is installed on wall or ceiling, the device shall be
firmly fixed.
If smoke, odors or noise rise from the device, turn off the power at
once and unplug the power cable, and then please contact the
service center.
If the product does not work properly, please contact your dealer
or the nearest service center. Never attempt to disassemble the
device yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
Cautions
Do not drop the device or subject it to physical shock, and do not
expose it to high electromagnetism radiation. Avoid the
equipment installation on vibrations surface or places subject to
shock (ignorance can cause equipment damage).
Do not place the device in extremely hot (refer to the specification
of the device for the detailed operating temperature), cold, dusty
or damp locations, and do not expose it to high electromagnetic
radiation.
The device cover for indoor use shall be kept from rain and
moisture.
Exposing the equipment to direct sun light, low ventilation or heat
source such as heater or radiator is forbidden (ignorance can cause
fire danger).

Video Intercom Vandal-Resistant Door Station·Quick Start Guide
ix
Do not aim the device at the sun or extra bright places. A blooming
or smear may occur otherwise (which is not a malfunction
however), and affecting the endurance of sensor at the same time.
Please use the provided glove when open up the device cover,
avoid direct contact with the device cover, because the acidic
sweat of the fingers may erode the surface coating of the device
cover.
Please use a soft and dry cloth when clean inside and outside
surfaces of the device cover, do not use alkaline detergents.
Please keep all wrappers after unpack them for future use. In case
of any failure occurred, you need to return the device to the
factory with the original wrapper. Transportation without the
original wrapper may result in damage on the device and lead to
additional costs.
Improper use or replacement of the battery may result in hazard of
explosion. Replace with the same or equivalent type only. Dispose
of used batteries according to the instructions provided by the
battery manufacturer.

Video Intercom Vandal-Resistant Door Station·Quick Start Guide
x
Table of Contents
1 Introduction ...............................................................................1
1.1 Overview........................................................................................ 1
1.2 Features ......................................................................................... 1
2 Appearance ................................................................................3
3 Terminals and Wiring ..................................................................4
3.1 Terminals and Interfaces............................................................... 4
3.2 Wiring Description ........................................................................ 5
3.2.1 Door Lock Wiring................................................................... 5
3.2.2 Door Magnetic Wiring .......................................................... 6
3.2.3 Exit Button Wiring ................................................................. 6
3.2.4 Alarm Device Input Wiring ................................................... 7
4 Installation .................................................................................8
4.1.1 Wall Mounting Plate ............................................................. 8
4.1.2 Wall Mounting....................................................................... 9
5 Remote Operation ....................................................................12
5.1 Activating Device......................................................................... 12
5.1.1 Activation via Web Browser ...............................................12
5.1.2 Activation via Batch Configuration Tool............................. 13
5.2 Editing Network Parameters ......................................................15
5.3 Adding Device.............................................................................. 16
5.3.1 Adding Online Device..........................................................16
5.3.2 Adding Device by IP Address ..............................................18
5.4 Accessing via Web Browser ........................................................ 19
6 Local Operation ........................................................................21
7 Appendix..................................................................................23
Installation Notice .............................................................................23
Wiring Cables..................................................................................... 23

Video Intercom Vandal-Resistant Door Station·Quick Start Guide
1
1Introduction
1.1 Overview
The DS-KB8112-IM is a vandal- resistant door station, which has
passed IK 9 (Impact Protection Level). The door station, featuring in
the vandal- resistant design, convenient installation, and easy
operation, supports the video intercom function, access control
function, door magnetic alarm, motion detection, and so on. As an
intelligent device, the vandal-proof door station is mainly applied in
the villa for improving the living security.
1.2 Features
Basic Functions
Video intercom function, supporting the communication with the
master station, and the indoor station
Access control function, supporting multiple door opening modes
(the indoor station, the master station, the client software, and
the web)
Self-adaptive IR supplement with max. 5-meter IR distance
High-performance embedded SOC processor
IK 9 and IP 66
Video/Audio Functions
HD video surveillance with WDR wide angle and high performance
CMOS, up to 720P @ 30 fps

Video Intercom Vandal-Resistant Door Station·Quick Start Guide
2
Noise suppression and echo cancellation
H.264 video compression standard
Low illumination
Alarm Functions
Supports the door magnetic alarm
Auto-uploads alarm messages to the master station or the client
software
Remote Controls
Remote reboot, remote upgrade, time synchronization via NTP, and
batch configuration function
Supports Web remote access and OSD display
Supports motion detection
Additional Features
ISAPI (Internet Server Application Programming Interface) and
ONVIF (Open Network Video Interface Forum) supported, to
ensure greater compatibility and interoperability among different
platforms
Supports bit rate and frame rate configuration, P/N video standard
configuration, Email configuration, and auto day & night switch
Auto-uploads captured pictures to the FTP or the client software
while unlocking the door

Video Intercom Vandal-Resistant Door Station·Quick Start Guide
3
2Appearance
1
2
3
5
4
Figure 2-1 Door Station Overview
Table 2-1 Components Description
No.
Description
1
Microphone
2
Built-in Camera
3
Low Illumination Supplement Light
4
Call Button
5
Loudspeaker

Video Intercom Vandal-Resistant Door Station·Quick Start Guide
4
3Terminals and Wiring
3.1 Terminals and Interfaces
Figure 3-1 Terminals and Interfaces
Table 3-1 Descriptions of Terminals and Interfaces
Name
No.
Interface
Description
Power
Supply
1
12 VDC
12 VDC Power Supply
Input
LAN
2
LAN
Network Interface (PoE
Supported)
ALARM
IN
A1
AI
Alarm Input
A2
GND
Grounding
ALARM
OUT
B1
COM
Grounding Signal
B2
NO
Door Lock Relay Output
(Connect Electric Strike)

Video Intercom Vandal-Resistant Door Station·Quick Start Guide
5
Name
No.
Interface
Description
B3
NC
Door Lock Relay Output
(Connect Electric Bolt or
Magnetic Lock)
3.2 Wiring Description
3.2.1 Door Lock Wiring
Terminal NC/COM is set as default for connecting magnetic
lock/electric bolt; terminal NO/ COM is set as default for connecting
electric strike.
To connect electric lock, it is required to set the output of terminal
NC/ COM/ NO to be electric lock via Batch Configuration Tool or
iVMS-4200 client software or the web browser.
Figure 3-2 Door Lock Wiring

Video Intercom Vandal-Resistant Door Station·Quick Start Guide
6
3.2.2 Door Magnetic Wiring
To connect door magnetic, it is required to set the output of terminal
AI to be door status via Batch Configuration Tool or iVMS-4200 client
software or the web browser.
Figure 3-3 Door Magnetic Wiring
3.2.3 Exit Button Wiring
To connect exit button, it is required to set the output of terminal AI
to be door status via Batch Configuration Tool or iVMS-4200 client
software or the web browser.

Video Intercom Vandal-Resistant Door Station·Quick Start Guide
7
Figure 3-4 Exit Button Wiring
3.2.4 Alarm Device Input Wiring
When you set the output of terminal AI to be custom via Batch
Configuration Tool or iVMS-4200 client software or the web browser,
you can connect any alarm input device to the door station via the
terminal AI.
Figure 3-5 Alarm Device Input Wiring

Video Intercom Vandal-Resistant Door Station·Quick Start Guide
8
4Installation
Before you start:
Make sure the device in the package is in good condition and all
the assembly parts are included.
The device supports two ways of power supply: 12 VDC, or PoE
power supply. Please make sure your power supply matches your
door station.
Make sure all the related equipment is power-off during the
installation.
Make sure the wall is strong enough to withstand 4 times the
weight of the door station.
Check the specification of the product for the installation
environment.
4.1.1 Wall Mounting Plate
To install the door station onto the wall, you are required to use a
matched mounting plate.
44 mm
82 mm
Figure 4-1 Wall Mounting Plate

Video Intercom Vandal-Resistant Door Station·Quick Start Guide
9
4.1.2 Wall Mounting
Steps:
1. Fix the wall mounting plate to the wall with 4 expansion screws.
Expansion Screws
Wall Mounting Plate
Figure 4-2 Install the Plate
2. Insert terminal blocks into the interfaces of the door station body,
and connect the network cable.
Interfaces
(Power, Alarm
In, Alarm Out)
Terminal
Blocks
Network
Interface
Network
Cable
Figure 4-3 Insert Terminals and Network Cable

Video Intercom Vandal-Resistant Door Station·Quick Start Guide
10
3. Fix the door station body to the protective shield tightly.
Protective Shield Door Station
Main Body
Figure 4-4 Fix the Body to the Shield
4. Hook the door station to the wall mounting plate tightly.
Hooks
Figure 4-5 Hook the Door Station to the Plate
5. Use the set screw to secure the door station with the mounting
plate.