HIK VISION DS-KV8103Y-IMPE2 User manual

Two-Wire Bundle
User Manual

Legal Informaon
About this Document
●This Document includes instrucons for using and managing the Product. Pictures, charts,
images and all other informaon hereinaer are for descripon and explanaon only.
●The informaon contained in the Document is subject to change, without noce, due to
rmware updates or other reasons. Please nd the latest version of the Document at the
Hikvision website ( hps://www.hikvision.com ). Unless otherwise agreed, Hangzhou Hikvision
Digital Technology Co., Ltd. or its aliates (hereinaer referred to as "Hikvision") makes no
warranes, express or implied.
●Please use the Document with the guidance and assistance of professionals trained in
supporng the Product.
About this Product
This product can only enjoy the aer-sales service support in the country or region where the
purchase is made.
Acknowledgment of Intellectual Property Rights
●Hikvision owns the copyrights and/or patents related to the technology embodied in the
Products described in this Document, which may include licenses obtained from third pares.
●Any part of the Document, including text, pictures, graphics, etc., belongs to Hikvision. No part
of this Document may be excerpted, copied, translated, or modied in whole or in part by any
means without wrien permission.
● and other Hikvision's trademarks and logos are the properes of Hikvision in
various jurisdicons.
●Other trademarks and logos menoned are the properes of their respecve owners.
LEGAL DISCLAIMER
●TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS DOCUMENT AND THE
PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS
IS" AND "WITH ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR
FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK.
IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR
LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING
NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE
Two-Wire Bundle User Manual
i

PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
LOSS.
●YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,
VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE
TIMELY TECHNICAL SUPPORT IF REQUIRED.
●YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY
RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT
RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF
HUMAN RIGHTS ABUSES.
●IN THE EVENT OF ANY CONFLICTS BETWEEN THIS DOCUMENT AND THE APPLICABLE LAW, THE
LATTER PREVAILS.
© Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
Two-Wire Bundle User Manual
ii

Symbol Convenons
The symbols that may be found in this document are dened as follows.
Symbol Descripon
Danger
Indicates a hazardous situaon which, if not avoided, will or could
result in death or serious injury.
Cauon
Indicates a potenally hazardous situaon which, if not avoided, could
result in equipment damage, data loss, performance degradaon, or
unexpected results.
Note Provides addional informaon to emphasize or supplement
important points of the main text.
Two-Wire Bundle User Manual
iii

Safety Instrucon
Warning
●All the electronic operaon should be strictly compliance with the electrical safety regulaons,
re prevenon regulaons and other related regulaons in your local region.
●Please use the power adapter, which is provided by normal company. The power consumpon
cannot be less than the required value.
●Do not connect several devices to one power adapter as adapter overload may cause over-heat
or re hazard.
●Please make sure that the power has been disconnected before you wire, install or dismantle the
device.
●When the product is installed on wall or ceiling, the device shall be rmly xed.
●If smoke, odors or noise rise from the device, turn o the power at once and unplug the power
cable, and then please contact the service center.
●If the product does not work properly, please contact your dealer or the nearest service center.
Never aempt to disassemble the device yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
Cauon
●Do not drop the device or subject it to physical shock, and do not expose it to high
electromagnesm radiaon. Avoid the equipment installaon on vibraons surface or places
subject to shock (ignorance can cause equipment damage).
●Do not place the device in extremely hot (refer to the specicaon of the device for the detailed
operang temperature), cold, dusty or damp locaons, and do not expose it to high
electromagnec radiaon.
●The device cover for indoor use shall be kept from rain and moisture.
●Exposing the equipment to direct sun light, low venlaon or heat source such as heater or
radiator is forbidden (ignorance can cause re danger).
●Do not aim the device at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a malfuncon however), and aecng the endurance of sensor at the
same me.
●Please use the provided glove when open up the device cover, avoid direct contact with the
device cover, because the acidic sweat of the ngers may erode the surface coang of the device
cover.
●Please use a so and dry cloth when clean inside and outside surfaces of the device cover, do
not use alkaline detergents.
●Please keep all wrappers aer unpack them for future use. In case of any failure occurred, you
need to return the device to the factory with the original wrapper. Transportaon without the
original wrapper may result in damage on the device and lead to addional costs.
Two-Wire Bundle User Manual
iv

●Improper use or replacement of the baery may result in hazard of explosion. Replace with the
same or equivalent type only. Dispose of used baeries according to the instrucons provided by
the baery manufacturer.
●Input voltage should meet both the SELV and the Limited Power Source according to 60950-1
standard.
●If a power adapter is provided in the device package, use the provided adapter only. If no power
adapter is provided, ensure the power adapter or other power supply complies with Limited
Power Source. Refer to the product label for the power supply output parameters.
Two-Wire Bundle User Manual
v

Regulatory Informaon
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed
under the EMC Direcve 2014/30/EU, RE Direcve 2014/53/EU,the RoHS Direcve
2011/65/EU
2012/19/EU (WEEE direcve): Products marked with this symbol cannot be disposed
of as unsorted municipal waste in the European Union. For proper recycling, return
this product to your local supplier upon the purchase of equivalent new equipment,
or dispose of it at designated collecon points. For more informaon see:
www.recyclethis.info
2006/66/EC (baery direcve): This product contains a baery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentaon for specic baery informaon. The baery is marked with this
symbol, which may include leering to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the baery to your supplier or to a designated
collecon point. For more informaon see:www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operaon is subject to
the following two condions:
1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired
operaon of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploitaon est autorisée aux deux condions suivantes :
1. l'appareil ne doit pas produire de brouillage, et
2. l'ulisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est suscepble d'en compromere le fonconnement.
Under Industry Canada regulaons, this radio transmier may only operate using an antenna of a
type and maximum (or lesser) gain approved for the transmier by Industry Canada. To reduce
potenal radio interference to other users, the antenna type and its gain should be so chosen that
the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communicaon.
Two-Wire Bundle User Manual
vi

Conformément à la réglementaon d'Industrie Canada, le présent émeeur radio peut fonconner
avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émeeur par
Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intenon des
autres ulisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une
communicaon sasfaisante.
This equipment should be installed and operated with a minimum distance 20cm between the
radiator and your body.
Cet équipement doit être installé et ulisé à une distance minimale de 20 cm entre le radiateur et
votre corps.
Two-Wire Bundle User Manual
vii

Contents
Chapter 1 About this Manual ...................................................................................................... 1
Chapter 2 Conguraon and Operaon of Indoor Staon ........................................................... 2
2.1 Acvaon ............................................................................................................................... 2
2.1.1 Acvate Indoor Staon ................................................................................................. 2
2.2 Conguraon Guide ............................................................................................................... 3
2.2.1 Typical Applicaon ........................................................................................................ 3
2.2.2 Local Operaon ............................................................................................................. 3
2.3 Operaon Guide .................................................................................................................. 13
2.3.1 Local Operaon ........................................................................................................... 13
Chapter 3 Conguraon and Operaon of Door Staon ............................................................ 17
3.1 Appearance .......................................................................................................................... 17
3.2 Restore to Factory Sengs .................................................................................................. 18
3.3 Terminal Descripon ............................................................................................................ 19
3.4 Installaon ........................................................................................................................... 19
3.4.1 Accessory Introducon ............................................................................................... 20
3.4.2 Surface Mounng with Protecve Shield .................................................................... 21
3.4.3 Flush Mounng with Mounng Box ........................................................................... 22
3.5 Typical Applicaon ............................................................................................................... 23
3.6 Video Intercom Operaon ................................................................................................... 24
3.7 Dimension ............................................................................................................................ 24
Two-Wire Bundle User Manual
viii

Chapter 1 About this Manual
Get the manual and related soware from or the ocial website (hp://www.hikvision.com).
Product Model
Two-Wire Door Staon DS-KV8103Y-IMPE2
Two-Wire Indoor Staon DS-KH6320Y-WTPE2
Two-Wire Bundle User Manual
1

Chapter 2 Conguraon and Operaon of Indoor
Staon
Enter a short descripon of your concept here (oponal).
This is the start of your concept.
2.1 Acvaon
2.1.1 Acvate Indoor Staon
You can congure and operate the indoor staon aer acvang the device.
Steps
1. Power on the device. It will enter the page of Language.
Figure 2-1 Language
2. Tap Next, and the device will be automacally acvated.
Two-Wire Bundle User Manual
2

2.2 Conguraon Guide
2.2.1 Typical Applicaon
The typical applicaon of the device is shown as below.
Figure 2-2 Typical Applicaon
Wire the door staon to the indoor staon with 2-wire cables.
You can acvate door staon by indoor staon.
Set the open duraon and other parameters by indoor staon.
Refers to the Indoor Staon Conguraon Guide for details.
2.2.2 Local Operaon
Quick Operaon
Aer device acvaon, the wizard page will pop up. The descripon is for other indoor staons.
Steps
1. Select language and tap Next.
Two-Wire Bundle User Manual
3

Figure 2-3 Select Language
2. Connect to Mobile Phone.
Figure 2-4 Connect to Mobile Phone
-If you would like to connect your device to your mobile phone, tap Connect. You will then set
Wi-Fi parameters.
Two-Wire Bundle User Manual
4

-Or you can tap Skip to skip this step and connect later. The device will then automacally
check the connecon between the door staon and indoor staon. If the two devices are
successfully paired, the indoor staon will then enter the menu page.
Note
If you skip this step, you will receive a noce of Connecng to App every day the device lights
up for the rst me. On the noce page, you can check the box of Do Not Show Again and tap
Skip if you do not like to receive this noce anymore.
3. Select a Wi-Fi from the list and enter the Wi-Fi's password to get connected. Tap Next.
Figure 2-5 Connect to Wi-Fi
4. Add your device to your mobile phone and tap Next. Scan the rst QR code to download the
App of Hik-Connect and scan the second QR code to add your device to the App.
Two-Wire Bundle User Manual
5

Figure 2-6 Add Device to Mobile Phone
5. Aer adding your device to your mobile phone, the device will check the connecon with the
door staon.
●If two devices pair successfully, the indoor staon will then enter the menu page.
●If pairing failed, the device will inform you to reset the indoor staon or to check the wiring.
Basic Sengs
Basic sengs is required before starng using the indoor staon. It is necessary to set the indoor
staon network, room No., linked devices, device me display, and so on.
Connect to Wi-Fi
Set Wi-Fi connecon.
Tap Sengs → . Enable Wi-Fi, and the indoor staon will search available Wi-Fi automacally.
Note
The Wi-Fi IP can be changed.
Two-Wire Bundle User Manual
6

Figure 2-7 Wi-Fi Sengs
Select an Wi-Fi and connect.
Sound Sengs
Call Sengs
You can set the ringtone, ring duraon, call forwarding me on call sengs page.
Steps
1. Tap Sengs → to enter the call sengs page.
Two-Wire Bundle User Manual
7

Figure 2-8 Call Sengs
2. Set corresponding parameters.
Ringtone
There are 3 ringtones by default, and you can custom and import at most 4 ringtones via
Batch Conguraon Tool or iVMS-4200 Client Soware.
Ringtone Duraon: The maximum duraon of indoor staon when it is called without being
accepted. Ringtone duraon ranges from 30 s to 60 s.
Calling Duraon
The call will end automacally when the actual calling duraon is longer than the congured
one. Calling duraon ranges from 30 s to 60 s.
Call Forwarding Duraon
The ring duraon limit beyond which the call is automacally forwarded to the mobile phone
designated by the resident. Call forwarding ranges from 0 s to 20 s.
Other Sengs
You can set the Do Not Disturb and Auto-answer funcons.
Auto-answer
Enable Auto-answer. Aer enabling, the call from door staon/villa door staon will be
answered by the indoor staon automacally. The caller from door staon/villa door
staon can leave voice messages. Aer the message is le, you can check it from Message
on the main page of the device.
Two-Wire Bundle User Manual
8

Figure 2-9 Main Page
Note
Before enabling Auto-answer, the funcon of Leave Message needs to be enabled. Tap
Sengs → → to enter the shortcut sengs page. Eanble Leave Message and go back to
calling sengs page to enable Auto-answer.
Do Not Disturb Device
Select All and all devices will not disturb this device. Select Indoor Staon and all indoor
staon will not disturb this device.
Do Not Disturb
Set the do not disturb schedule. Select Close and the do not disturb funcon will not be
enabled. Select All Day and this device will not be disturbed all day. Select Schedule and
you can set the do not disturb me duraon. Within the congured me, this device will
not be disturbed.
Shortcut Sengs
You can enable leave message or snapshot funcon according to your actual needs.
You can set the leave message me and snapshot me if these two funcons are enabled.
Volume Sengs
Set the microphone volume, prompt sound volume and call volume.
Two-Wire Bundle User Manual
9

Steps
1. Tap Sengs → → Volume Sengs to enter the volume sengs page.
2. Set the microphone volume, prompt sound volume, and the call volume of the indoor staon.
3. Oponal: Enable Touch Sound to turn on the sound when you touch device screen.
General Sengs
You can set me and date, format, system language and adjust the screen brightness on this page.
Tap Sengs → to enter the general sengs page.
Figure 2-10 General Sengs
Time and Date
Set the displayed me and date format, current me. Tap Sync Time to synchronize the device
me. Tap to enable Synchronize Time to Door Staon to synchronize the device me to the
linked door staon. You can also enable DST and set the DST start me, end me and bias.
Note
For details, see Synchronize Time .
System Language
Tap System Language to change the system language.
Brightness Adjustment
Tap + or - to adjust the screen brightness.
Two-Wire Bundle User Manual
10

Clean Screen
Enable Clear Screen and the screen will be locked for 30s. And you can clear the screen within
the me duraon.
Note
●Aer enabling Clear Screen funcon, press and hold the Unlock key to exit the clear screen
mode.
●The device without unlock key will exit the clear screen mode automacally when the me is
out.
Live View Duraon
You can set the duraon of live view.
Synchronize Time
Steps
1. Tap Sengs → → Time and Date to enter the me synchronizaon page.
2. Tap Date Format and Time Format to set the me format.
3. Oponal: Tap Time to set me manually.
4. Tap Sync Time.
Figure 2-11 Time Synchronizaon
1) Select the Time Zone.
2) Enable Enable NTP.
Two-Wire Bundle User Manual
11