HIK VISION PTZ User manual

Video Conference PTZ Camera

Packing List
Power Adapter
Camera
Remote Control Quick Start Guide
Battery
Bracket Screws USB Cable
Extension Cable

Image Flip
Pan/Tilt Control
Focus
Zoom in/out
One-touch Focus
Mute
Supports four modes. The image flips as the
following order every time pressing the button. "F"
is the default status.
Host Mode
Functions
Auto Frame
Turn on/off the audio of the remote control or the
camera.
Adjust the focus manually.
Pan/tilt the camera
Press the button to adjust the camera by level.
Press and hold the button to adjust the camera
continuously.
Zoom in/out
Press the button to adjust the camera by level.
Press and hold the button to adjust the camera
continuously.
Focus
Press the button to adjust the camera by level.
Press and hold the button to adjust the camera
continuously.
Turn on/off the Auto Frame.
Press the button to enable the function. Press and
hold the button for 3 seconds to return to the
normal view.
Turn on/off the pickup function of the remote
control. Press and hold the button to enable the
function. Release the button to disable the function.
Note: The pickup function of the camera is disabled
when enabling the remote control pickup.

Indicator
Microphone
Presets
Default Preset
If the preset 0 is predefined, the camera
moves to the set position after powering on.
If not, the camera moves to the default
position after powering on.
1. Adjust the image by remote control.
2. Press and hold a preset number for 3
seconds, and the indicator flashes twice. It
means the preset is successfully set.
3. Press the preset number, and the device
return to the defined position. Up to 6
presets can be set.
Restore to the default settings
Press and hold the buttons at the same time
for 3 seconds, and the red indicator flashes
three times.
Wireless pairing
Press and hold the buttons at the same time
for 3 seconds, and the white indicator flashes
continuously.

USB Type C
The lock shall be purchased
Microphone
Indicator
Lens
Kensington Lock Power Interface
1/4-20UNC Screw Hole
Lashing Eye
When the indicator turns to red, it means the device is standby. When the indicator turns to blue, it means the device is
working normally.

Extension Cable
Connection
Power Adapter
USB Cable

Installation
Table Mounting

Wall Mounting