HIK VISION DS-2CD7133-E User manual

Network Mini Dome Camera
Installation Manual
V3.0.0
Hangzhou Hikvision Digital Technology Co., Ltd.
http://www.hikvision.com
Service Tel：[phone]
2010-04

Thank you for purchasing our product. If there are any questions, or
requests, please do not hesitate to contact the dealer.
This manual applies to DS-2CD7133-E and DS-2CD7153-E Network
Camera.
This manual may contain several technical incorrect places or printing
errors, and the content is subject to change without notice. The
updates will be added to the new version of this manual. We will readily
improve or update the products or procedures described in the
manual.
DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the performance or
reliability of the security or signaling aspects of this product. UL has only
tested for fire, shock or casualty hazards as outlined in UL’s Standard(s)
for Safety, UL60950-1. UL Certification does not cover the performance
or reliability of the security or signaling aspects of this product. UL
MAKES NO REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS
WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY
SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.”

Installation Manual of Network Mini Dome Camera 1
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly
to avoid danger or property loss.
The precaution measure is divided into ‘Warnings’ and ‘Cautions’:
Warnings: Serious injury or death may be caused if any of these warnings are
neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are
neglected.
Warnings Follow these safeguards
to prevent serious injury or
death.
Cautions Follow these precautions
to prevent potential injury or
material damage.
Warnings：
1. In the use of the product, you must strictly comply with the electrical safety
regulations of the nation and region.
2. Source with DC 12V according to the IEC60950－1 standard. Please refer to
technical specifications for more details.
3. Do not connect several devices to one power adapter as an adapter overload
may cause over-heating and can be a fire hazard.If use the POE as the power
supply, please make sure that the POE Switch have the sufficient power.
4. Please make sure that the plug is firmly inserted into the power socket.
5. When the product is installed on a wall or ceiling, the device should be firmly
fixed.
6. If smoke, odor, or noise rise from the device, turn off the power at once and
unplug the power cable, then contact the service center.
7. If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the camera yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Mini Dome Camera 2
maintenance.)
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Mini Dome Camera 3
Notice:
1. Make sure the power supply voltage is correct before using the camera.
2. Do not drop the camera or subject it to physical shock.
3. Do not touch sensor modules with fingers. If cleaning is necessary, use a clean
cloth with a bit of ethanol and wipe it gently. If the camera will not be used for
an extended period of time, put on the lens cap to protect the sensor from dirt.
4. Do not aim the camera at the sun or extra bright places. A blooming or smear
may occur otherwise (which is not a malfunction however), and affecting the
endurance of sensor at the same time.
5. The sensor may be burned out by a laser beam, so when any laser equipment is
being used, make sure that the surface of the sensor will not be exposed to the
laser beam.
6. Do not place the camera in extremely hot or cold temperatures (the operating
temperature should be between -10°C~ 60°C, dusty or damp locations, and do
not expose it to high electromagnetic radiation.
7. To avoid heat accumulation, good ventilation is required for a proper operating
environment.
8. While shipping, the camera should be packed in its original packing, or packing
of the same texture.
9. Regular part replacement: a few parts (e.g. electrolytic capacitor) of the
equipment should be replaced regularly according to their average life time.
The average time varies because of differences between operating
environment and usage history, so regular checking is recommended for all users.
Please contact with your dealer for more details.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Mini Dome Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
4
Table of Contents
Chapter 1 Introduction.....................................................................................1
1.1 Network camera Functions and Features..........................................1
1.2 Applications............................................................................................1
Chapter 2 Installation........................................................................................2
2.1 Camera Description ..............................................................................2
2.1.1 Camera Physical Description ......................................................3
2.1.2 Camera Connection ....................................................................4
2.2 Hardware Installation.............................................................................5
Appendix Product Specification.....................................................................8
DS-2CD7133-E................................................................................................8
Specification............................................................................................8
Dimensions...............................................................................................9
DS-2CD7153-E............................................................................................. 10
Specification......................................................................................... 10
Dimensions............................................................................................ 11

Installation Manual of Network Mini Dome Camera 1
Chapter 1 Introduction
Network camera is a kind of embedded digital surveillance product that
combines the features of both traditional analog camera and network DVS (Digital
Video Server). Due to the embedded Linux operation system and the latest Davinci
hardware platform of TI, the system operates with high scheduling efficiency.
Furthermore, the firmware is burned in the flash, which makes the product small,
reliable and highly stable.
1.1 Network camera Functions and Features
Functions:
Network Function: Support the TCP/IP protocols (DDNS, PPPoE, FTP, SMTP, NTP,
HTTPS, SIP addible) and IE browsing.
Heartbeat Function: The server can acquire real time operating performance of
the network camera through the heartbeat function.
Alarm Function: Supports Motion Detection.
User Management: Support multilevel right management. The administrator can
create up to 15 separate users with different right levels, which highly improves
the system security.
Compression Functions:
Support 1 channel video signal and standard H.264 video encoding
compression, which supports both variable bit rate and variable frame rate;
besides, you can self-define both the video quality and its compressed bit rate.
Remote Control:
The product offers a 10M/100M self-adaptive Ethernet interface.
Support various protocols.
Set the parameters, browse real time videos or check the camera performance
through software or IE, and store the compressed bit rate through network.
Support remote upgrades and maintenance.
1.2 Applications
This camera is ideal for remote control network applications. E.g.:
1. Network surveillance for supermarkets and factories.
2. Remote surveillance for homes and offices.
3. Indoor monitoring scenes, such as hotel, corridor, stairway.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Mini Dome Camera 2
Chapter 2 Installation
NOTE：
1. Please check if all the items on the package list have been included with
your camera.
2. Read the following contents carefully before the installation.
3. Make sure that all the related equipment is power-off during the installation.
4. Check the power supply to prevent any damage caused by mismatching
problems.
5. If the product does not operate properly, please contact your dealer or the
nearest service center. Never attempt to disassemble the camera yourself.
Users are responsible for any problem caused by modification or repairing
without authorization.
2.1 Camera Description
NOTE：The camera supports PoE power supply.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Mini Dome Camera 3
2.1.1 Camera Physical Description
Serial NO. Description
1 Back box
2 Lens
3 P: Power LED indicator, which turns red when power is applied to the unit.
4 Bottom board
5 Bottom board set screw hole
6 Lens set screw
7 S & L: Network status LED indicator.
When the network is connected, the “S” LED turns orange, while the “L” LED
flickers in green.
8 RESET: Reset all paramaters to factory default settings.
NOTE:
When the camera is power up, press the “RESET” button for about 10 seconds, then all
parameters, including user name, password, IP address, port number, etc., will be reset to the
factory default settings.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Mini Dome Camera 4
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
2.1.2 Camera Connection
Step1:
Connect one end of the
network cable to the camera
and the other end to PC.
Step2:
Connect one end of the
power cord to the camera
and the other end to power
sokcket to supply power for
the camera.
Step3:
Access the camera over IE or
client software to view live
video images.