HIK VISION UD01570B User manual

0
Camera
Mobile Network Mini Dome Camera
Quick Start Guide
UD01570B

Network Mini Dome Camera·Quick Start Guide
1
1
Quick Start Guide
COPYRIGHT © 2016 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures,
graphs are the properties of Hangzhou Hikvision Digital Technology
Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”).
This user manual (hereinafter referred to be “the Manual”) cannot
be reproduced, changed, translated, or distributed, partially or
wholly, by any means, without the prior written permission of
Hikvision. Unless otherwise stipulated, Hikvision does not make any
warranties, guarantees or representations, express or implied,
regarding to the Manual.
About this Manual
This Manual is applicable to Mobile Network Mini Dome Camera.
The Manual includes instructions for using and managing the
product. Pictures, charts, images and all other information
hereinafter are for description and explanation only. The
information contained in the Manual is subject to change, without
notice, due to firmware updates or other reasons. Please find the
latest version in the company website
(http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the
properties of Hikvision in various jurisdictions. Other trademarks and
logos mentioned below are the properties of their respective
owners.

Network Mini Dome Camera·Quick Start Guide
2
2
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE
PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND
FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,
AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL
HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE
LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR
LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF
DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF
THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF
PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL
NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET
SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL
RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS
PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE
APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT
THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

Network Mini Dome Camera·Quick Start Guide
3
3
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATER PREVAILS.
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.

Network Mini Dome Camera·Quick Start Guide
4
4
EU Conformity Statement
This product and - if applicable - the supplied
accessories too are marked with "CE" and comply
therefore with the applicable harmonized European
standards listed under the EMC Directive 2014/30/EU, the RoHS
Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see:
www.recyclethis.info
2006/66/EC (battery directive): This product
contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union.
See the product documentation for specific battery
information. The battery is marked with this symbol,
which may include lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the battery to your
supplier or to a designated collection point. For more information
see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards
requirements.

Network Mini Dome Camera·Quick Start Guide
5
5
Warning
This is a class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to
take adequate measures.
Safety Instruction
These instructions are intended to ensure that user can use the
product correctly to avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings
are neglected.
Cautions: Injury or equipment damage may occur if any of the
cautions are neglected.
Warnings
●Proper configuration of all passwords and other security
settings is the responsibility of the installer and/or end-user.
Warnings Follow these
safeguards to prevent
serious injury or death.
Cautions Follow these precautions
to prevent potential injury or
material damage.

Network Mini Dome Camera·Quick Start Guide
6
6
●In the use of the product, you must be in strict compliance with
the electrical safety regulations of the nation and region. Please
refer to technical specifications for detailed information.
●Input voltage should meet both the SELV (Safety Extra Low
Voltage) and the Limited Power Source with 24 VAC or 12 VDC
according to the IEC60950-1 standard. Please refer to technical
specifications for detailed information.
●Do not connect several devices to one power adapter as
adapter overload may cause over-heating or a fire hazard.
●Please make sure that the plug is firmly connected to the power
socket. When the product is mounted on wall or ceiling, the
device shall be firmly fixed.
●If smoke, odor or noise rise from the device, turn off the power
at once and unplug the power cable, and then please contact
the service center.
Cautions
●Make sure the power supply voltage is correct before using the
camera.
●Do not drop the camera or subject it to physical shock.
●Do not touch sensor modules with fingers. If cleaning is
necessary, use clean cloth with a bit of ethanol and wipe it
gently. If the camera will not be used for an extended period,
please replace the lens cap to protect the sensor from dirt.
●Do not aim the camera at the sun or extra bright places.
Blooming or smearing may occur otherwise (which is not a

Network Mini Dome Camera·Quick Start Guide
7
7
malfunction), and affect the endurance of sensor at the same
time.
●The sensor may be burned out by a laser beam, so when any
laser equipment is in using, make sure that the surface of
sensor will not be exposed to the laser beam.
●Do not place the camera in extremely hot, cold (the operating
temperature shall be-30°C ~+60°C , or -40°C ~ +60°C if the
camera model has an “H” in its suffix), dusty or damp locations,
and do not expose it to high electromagnetic radiation.
●To avoid heat accumulation, good ventilation is required for
operating environment.
●Keep the camera away from liquid while in use.
●While in delivery, the camera shall be packed in its original
packing, or packing of the same texture.
●Regular part replacement: a few parts (e.g. electrolytic
capacitor) of the equipment shall be replaced regularly
according to their average enduring time. The average time
varies because of differences between operating environment
and using history, so regular checking is recommended for all
the users. Please contact with your dealer for more details.
●Improper use or replacement of the battery may result in
hazard of explosion. Replace with the same or equivalent type
only. Dispose of used batteries according to the instructions
provided by the battery manufacturer.
●If the product does not work properly, please contact your
dealer or the nearest service center. Never attempt to
disassemble the camera yourself. (We shall not assume any

Network Mini Dome Camera·Quick Start Guide
8
8
responsibility for problems caused by unauthorized repair or
maintenance.)

Network Mini Dome Camera·Quick Start Guide
9
9
Table of Contents
1 Appearance Description ............................................................... 10
1.1 Overview....................................................................... 10
1.2 Cables Description ........................................................ 12
2 Installation.................................................................................... 15
2.1 Memory Card Installation.............................................. 16
2.2 Camera Mounting ......................................................... 17
2.3 Installation of Network Cable Water-proof Jacket
(Optional) ................................................................................. 21
3 Setting the Network Camera over the LAN .................................. 24
3.1 Wiring ........................................................................... 24
3.2 Activating the Camera................................................... 25
3.2.1 Activation via Web Browser................................ 25
3.2.2 Activation via SADP Software ............................. 26
3.3 Modifying the IP Address .............................................. 28
4 Accessing via Web Browser .......................................................... 30
0504001060516

Network Mini Dome Camera·Quick Start Guide
10
10
1Appearance Description
1.1 Overview
1
2
3
4
5
6
7
8
9
Figure 1-1 Overview of Mobile Network Mini Dome Camera

Network Mini Dome Camera·Quick Start Guide
11
11
Description of Mobile Network Mini Dome CameraTable 1-1
No.
Description
1
Dome Cover
2
Mounting Base
3
Lens
4
Dome Drive
5
Mic.
6
Serial Port
7
Reset Button
8
Memory Card Slot
9
IR LED
Press Reset Button about 10s when the camera is powering on or
rebooting to restore the default settings, including the user name,
password, IP address, port No., etc.

Network Mini Dome Camera·Quick Start Guide
12
12
1.2 Cables Description
This camera series has several camera models, each of which may
have different cable group. The following figures and tables show the
description of all possible cables in this camera series.
1
2
3
4
5
6
Figure 1-2 Cable Overview

Network Mini Dome Camera·Quick Start Guide
13
13
Cable DescriptionTable 1-2
No.
Description
1
RJ45 Network Cable
2
M12 Aviation Plug
3
Video Out (BNC)
4
Power Supply and
Audio Out Cable
Black: power negative
Red: power positive
White and Brown: audio out
5
Power Supply Cable
6
Audio Out (Line Out) Cable
The relation between RJ45 wire and M12 wire is shown in the
following figure and table.
1 2
3
4
1
8
M12 Aviation Plug RJ45 Network Interface
Figure 1-3 RJ45 Interface and M12 Aviation Plug

Network Mini Dome Camera·Quick Start Guide
14
14
Wire RelationTable 1-3
M12 Wire
RJ45 Wire
TX+
1
1
TX-
3
2
RX+
2
3
RX-
4
6

Network Mini Dome Camera·Quick Start Guide
15
15
2Installation
Before you start:
●Make sure the device in the package is in good condition and all
the assembly parts are included.
●The standard power supply is 12V DC or 24V AC, please make
sure your power supply matches with your camera.
●Make sure all the related equipment is power-off during the
installation.
●Check the specification of the products for the installation
environment.
●Make sure that the wall is strong enough to withstand four
times the weight of the camera and the bracket.
For the camera that supports IR, you are required to pay attention to
the following precautions to prevent IR reflection:
●Dust or grease on the dome cover will cause IR reflection.
Please do not remove the dome cover film until the installation
is finished. If there is dust or grease on the dome cover, clean
the dome cover with clean soft cloth and isopropyl alcohol.
●Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back into
the lens causing reflection.
●The foam ring around the lens must be seated flush against the
inner surface of the bubble to isolate the lens from the IR LEDS.
Fasten the dome cover to camera body so that the foam ring
and the dome cover are attached seamlessly.

Network Mini Dome Camera·Quick Start Guide
16
16
2.1 Memory Card Installation
Camera of this series supports a memory card as the local storage.
Follow the following steps to mount the memory card.
Steps:
1. Unscrew the dome cover to disassemble the camera with
supplied wrench.
Dome Cover
Disassemble the CameraFigure 2-1
2. Insert the memory card into the memory card slot.
Memory Card Slot
Memory Card
Install the Memory CardFigure 2-2
3. (Optional) To unmount the memory card, push to get it ejected.

Network Mini Dome Camera·Quick Start Guide
17
17
2.2 Camera Mounting
Before you start:
●Do not tear off the protection film until the installation is
completed.
●Do not touch the inside face of the bubble with your hands.
Steps:
1. Paste the drill template to the desired mounting place.
FRONT
Drill Template
Hole A: for cables routed through the ceiling
Screw hole 1: for Mounting Base
Drill TemplateFigure 2-3
2. Prepare for cable routing.
1). If you want to route cables through the ceiling, cut a hole
according to Hole A of the drill template.

Network Mini Dome Camera·Quick Start Guide
18
18
2). If you want to route cable through the side outlet of the
mounting base, use a plier to remove the piece of plastic that
blocks the side outlet.
Plastic Piece
Figure 2-4 Clear the Side Outlet
3. Fix the mounting base with expansion screws or self-tapping
screws. If you use expansion screws, drill the screw holes
according to the Screw Hole 1 of the drill template, see Figure
2-3.
1
22
1: screw holes for mounting base
2: screw holes for camera
Figure 2-5 Screw Holes on Mounting Base

Network Mini Dome Camera·Quick Start Guide
19
19
Install the Mounting BaseFigure 2-6
4. Route and connect cables. Fix the camera to the mounting base
with two PM4×8 screws.
(Optional) For cameras that are installed outdoor, it is recommended
to install water-proof jacket to the network interface. See Section
2.3.
Drill Template
Mounting Base
Camera
PM4×8 Screw
Figure 2-7 Fix the Camera