HIK VISION DS-2DF6223-CX User manual

Ex
Explosion-proof Dome·Quick Start Guide
i
Explosion-proof Dome
Quick Start Guide

Ex
Explosion-proof Dome·Quick Start Guide
ii
Quick Start Guide
© 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its
affiliates (hereinafter referred to as “Hikvision”), and it cannot be reproduced, changed,
translated, or distributed, partially or wholly, by any means, without the prior written
permission of Hikvision. Unless otherwise expressly stated herein, Hikvision does not
make any warranties, guarantees or representations, express or implied, regarding to
the Manual, any information contained herein.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts,
images and all other information hereinafter are for description and explanation only.
The information contained in the Manual is subject to change, without notice, due to
firmware updates or other reasons. Please find the latest version of this Manual at the
Hikvision website (http://www.hikvision.com).
Please use this Manual with the guidance and assistance of professionals trained in
supporting the Product.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of
Hikvision in various jurisdictions.
Other trademarks and logos mentioned are the properties of their respective
owners.
LEGAL DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE
PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE
PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE.
THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION
BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF
DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING
NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF
THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT
SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM
CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY
RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

Ex
Explosion-proof Dome·Quick Start Guide
iii
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND
YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE
APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A
MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING
WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR
DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT
FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF
WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL
OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR
EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS
ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW,
THE LATER PREVAILS.
05060020200731

Ex
Explosion-proof Dome·Quick Start Guide
iv
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked
with "CE" and comply therefore with the applicable harmonized European
standards listed under the EMC Directive 2014/30/EU, the RoHS Directive
2011/65/EU and the ATEX Directive 2014/34/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points.
For more information see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that cannot
be disposed of as unsorted municipal waste in the European Union. See the
product documentation for specific battery information. The battery is
marked with this symbol, which may include lettering to indicate cadmium
(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier
or to a designated collection point. For more information see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
Warning:
This is a class A product. In a domestic environment this product may cause radio
inter-ference in which case the user may be required to take adequate measures.
Intended Use of the Dome

Ex
Explosion-proof Dome·Quick Start Guide
v
ATEX: II 2GD Ex db IIC T6 Gb /Ex tb IIIC T80℃Db IP68
IECEx: Ex db IIC T6 Gb /Ex tb IIIC T80℃Db IP68
Hazardous Area Classification: Zone 1, Zone 2, Zone 21, Zone 22
IP Degree: IP68 (2m, 2h)
Ex Standards:
IEC 60079-0: 2011 EN 60079-0: 2012
IEC 60079-1: 2014 EN 60079-1: 2014
IEC 60079-31: 2013 EN 60079-31: 2014
Special Conditions for Safe Use
1. Ambient temperature: -40°C - +60°C
2. DO NOT OPEN WHEN ENERGIZED
3. POTENTIAL ELECTROSTATIC CHARGING HAZARD –SEE INSTRUCTIONS
4. When assembly, operation and maintenance, the operator must follow the
requirements of the IEC 60079-14: latest version Explosive atmospheres- Part 14:
Electrical installations design, selection and erection, beside of the manufacturer’s
operating instructions or its National equivalent.
5. Repair and overhaul shall comply with IEC 60079-19: latest version or its National
equivalent.
Explosion-proof Dome Nameplate
Explosion-proof Dome
WARNING: DO NOT OPEN WHEN ENERGIZED
CAUTION : USE FASTENERS WITH YIELD
STRENGTH ≥450MPa
POTENTIAL ELECTROSTATIC CHARGING
HAZARD-SEE INSTRUCTIONS

Ex
Explosion-proof Dome·Quick Start Guide
vi
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to
avoid danger or property loss.
The precaution measure is divided into Warnings and Cautions:
Warnings: Neglecting any of the warnings may cause serious injury or death.
Cautions: Neglecting any of the cautions may cause injury or equipment damage.
Warnings
Grounding: The both internal and external earthing shall be connected reliably.
All the electronic operation should be strictly compliance with the electrical safety
regulations, fire prevention regulations and other related regulations in your local
region.
Make sure that the power has been disconnected before you wire, install or
disassemble the speed dome. Never wire, install or disassemble the speed dome in
explosive environment.
To avoid fire danger caused by electrostatic charge, never touch or wipe the speed
dome in explosive environment. Perform the wiping and replacing accessories only
under non-explosive environment with the provided glove.
When the speed dome is installed on wall or ceiling, the device shall be firmly fixed.
If smoke, odors or noise rise from the speed dome, turn off the power at once and
unplug the power cable, and then contact the service center.
If the speed dome does not work properly, contact your dealer or the nearest
service center. Never attempt to disassemble the speed dome yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)
Cautions
If the camera fails to synchronize local time with that of the network, you need to
set up camera time manually. Visit the camera (via web browser or client software)
and enter system settings interface for time settings.
Warnings Follow
these safeguards to
prevent serious
injury or death.
Cautions Follow these
precautions to prevent
potential injury or
material damage.

Ex
Explosion-proof Dome·Quick Start Guide
vii
Do not drop the speed dome or subject it to physical shock, and do not expose it to
high electromagnetism radiation. Avoid installation on vibrations surface or places
subject to shock (ignorance can cause device damage).
To ensure explosion-proof performance, do not damage explosion-proof surface.
Do not place the speed dome in extremely hot (refer to the specification of the
device for the detailed operating temperature), cold, dusty or damp locations, and
do not expose it to high electromagnetic radiation.
The dome cover for indoor use shall be kept from rain and moisture.
Exposing the speed dome to direct sun light, low ventilation or heat source such as
heater or radiator is forbidden (ignorance can cause fire danger).
Do not aim the speed dome at the sun or extra bright places. A blooming or smear
may occur otherwise (which is not a malfunction however), and affecting the
endurance of sensor at the same time.
Use the provided glove when open up the dome cover, and avoid direct contact with
the dome cover, because the acidic sweat of the fingers may erode the surface
coating of the dome cover.
To prevent accumulation of electrostatic charge, use a soft and damp cloth when
clean inside and outside surfaces of the bubble. Do not use alkaline detergents.
Keep all wrappers after unpack them for future use. In case of any failure occurred,
you need to return the speed dome to the factory with the original wrapper.
Transportation without the original wrapper may result in damage on the speed
dome and lead to additional costs.
This equipment is not suitable for use in locations where children are likely to be
present.
Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut
the battery, which may result in an explosion.
Do not leave the battery in an extremely high temperature surrounding environment,
which may result in an explosion or the leakage of flammable liquid or gas.
Do not subject the battery to extremely low air pressure, which may result in an
explosion or the leakage of flammable liquid or gas.
Improper use or replacement of the battery may result in hazard of explosion.
Replace with the same or equivalent type only. Dispose of used batteries according
to the instructions provided by the battery manufacturer.
L’utilisation ou le remplacement inadéquats de la pile peuvent entraîner un risque
d’explosion. Remplacez-la par le même type ou l’équivalent du même type
seulement. Jetez les piles usagées conformément aux directives fournies par le
fabricant de la pile.

Ex
Explosion-proof Dome·Quick Start Guide
viii
Table of Contents
1 Overview......................................................................................................1
1.1 Explosion-proof Dome Overview ..........................................................................1
1.2 Explanation of model naming...............................................................................1
1.3 Power Supply ......................................................................................................2
1.4 Explosion-proof Parameters .................................................................................2
1.5 Mechanical Specification .....................................................................................2
1.6 Working Environment ..........................................................................................2
2 Installation ................................................................................................... 3
2.1 Preparation .........................................................................................................3
2.1.1 Basic Requirement.........................................................................................3
2.1.2 Checking Installing Environment ....................................................................3
2.1.3 Preparing Cables ...........................................................................................3
2.1.4 Preparing Tools..............................................................................................3
2.1.5 Original Packaging .........................................................................................3
2.1.6 Run the Device in Safe Area ...........................................................................3
2.2 Cable Description and Routing .............................................................................5
2.3 Installing the Explosion-proof Dome.....................................................................6
2.3.1 Disconnecting the Cables...............................................................................6
2.3.2 Wall Mounting ..............................................................................................7
2.3.3 Pendant Mounting ........................................................................................9
2.3.4 Cable Entry Installation................................................................................12
2.4 Protective Measures for Outdoor Installation .....................................................13
3 Setting the Speed Dome over the LAN........................................................ 14
3.1 Wiring...............................................................................................................14
3.2 Activating the Speed Dome................................................................................14
3.2.1 Activation via Web Browser .........................................................................15
3.2.2 Activation via SADP Software.......................................................................16
3.3 Modifying the IP Address ...................................................................................17
4 Accessing via Web Browser ........................................................................ 18

Ex
Explosion-proof Dome·Quick Start Guide
1
1Overview
1.1 Explosion-proof Dome Overview
The explosion-proof dome captures high quality colored images in dim light
environment with its low illumination and offers more details over expansive areas.
It is equipped with explosion-proof enclosure made of stainless steel. It can be widely
used in places such as: port, wharf, petrochemical industry, military industry.
Refer to Figure 1-1 for explosion-proof dome overview.
Figure 1-1 Explosion-proof Dome Overview
1.2 Explanation of model naming
The product can be named by rules of Figure 1-2 and Figure 1-3.
Figure 1-2 Product Naming Rule 1

Ex
Explosion-proof Dome·Quick Start Guide
2
Figure 1-3 Product Naming Rule 2
1.3 Power Supply
For detailed information about the power supply, refer to Explosion-proof Dome
Nameplate.
1.4 Explosion-proof Parameters
For detailed information about explosion-proof parameters, refer to Explosion-proof
Dome Nameplate.
1.5 Mechanical Specification
Material: 304/316L Stainless Steel.
Cable outlet: One G 3/4 explosion-proof cable outlet, inner hole diameter Φ15.
1.6 Working Environment
Altitude (Above sea level): Within 2000m.
Humidity: Within 95%.
Temperature: Refer to Explosion-proof Dome Nameplate.
Note:
To ensure safety of the users and explosion-proof performance of the speed dome, your
installation environment must meet the installation requirements of the speed dome
you purchased.

Ex
Explosion-proof Dome·Quick Start Guide
3
2Installation
2.1 Preparation
2.1.1 Basic Requirement
All the electronic operation should be in strictly compliance with the electrical safety
regulations, fire prevention regulations and other related regulations in your local
region.
Make sure the device in the package is in good condition and all the assembly parts
are included.
2.1.2 Checking Installing Environment
Make sure that there is enough space to install the device and accessories.
Make sure that the wall is strong enough to withstand at least eight times the weight
of the device and accessories.
2.1.3 Preparing Cables
You should prepare proper cables according to the actual network bandwidth,
transmission distance and installation environment:
Network Cable
Power Cord
2.1.4 Preparing Tools
Before installation, prepare the tools, such as the expansion screws, electric hammer,
electric drill, wrench, screwdriver, electroprobe, and network cable.
2.1.5 Original Packaging
When you unpack the device, keep the original package properly, in case of returning or
repairing the camera, you can pack the device with the package.
Note:
The user should be responsible for any damage caused due to transporting in unoriginal
package.
2.1.6 Run the Device in Safe Area
It is recommended to trial run the device in the safe area before installation.
Steps:
1. Make sure the power cable and network cable are connected properly. Then power
on the device to trial run the device.

Ex
Explosion-proof Dome·Quick Start Guide
4
Note:
If there is no network in the safe area, connect CVBS cable to a monitor via auxiliary
video cable to test if the device displays image normally.
VI DE
O
CVBS CableAuxiliary Video Cable
Figure 2-1 Auxiliary Video Cable Connection
2. Check if the device performs power-up action. If not, contact the technical support.
Normally, the power-up action should include the device movement of automatically
panning and tilting.
3. Check if the image can be displayed normally. If not, contact the technical support.
4. Start the installation after making sure the device works properly.
Note:
If the speed dome cannot be powered up, check the cable connection carefully.

Ex
Explosion-proof Dome·Quick Start Guide
5
2.2 Cable Description and Routing
Network Cable
Audio Cable
Alarm Cable
CVBS Cable
RS-485 Cable
Power Cord
Figure 2-2 Cable Description
Notes:
The cables vary depending on different speed dome models.
The three cables of the power cord should be connected to corresponding wires.
The red cable should be connected to live wire. The black cable should be
connected to neutral wire. The yellow/green cable must be connected to the
ground.
For power cord, refer to the nameplate for the voltage standard. To avoid
transmitting interference, route power cables.

Ex
Explosion-proof Dome·Quick Start Guide
6
Connect the cable through
cable trunk or cable tray.
Junction Box
Cable Entry
Figure 2-3 Cable Wiring Diagram
2.3 Installing the Explosion-proof Dome
Before you start:
Check the package contents and make sure that the device in the package is in good
condition and all the assembly parts are included.
We highly recommend that before installation, you apply power to the speed dome to
test it and make sure it can work normally.
Notes:
Do not drag the speed dome with its waterproof cables. The waterproof
performance is affected otherwise.
Do not touch the bubble directly by hand. The image blurs otherwise.
All installation operations shall be performed when the speed dome is powered off.
Do not disassemble the speed dome.
2.3.1 Disconnecting the Cables
After testing the speed dome, disconnect the cables as shown in Figure 2-2.

Ex
Explosion-proof Dome·Quick Start Guide
7
Disconnect the
cables
Do not disconnect the
CVBS and Network cables
Figure 2-4 Disconnecting the cables
2.3.2 Wall Mounting
Before you start:
Make sure that the wall is thick enough to withstand the expansion screws.
Make sure that the wall is strong enough to withstand more than eight times the
weight of the dome and the accessories.
There must be enough space for installing the explosion-proof dome and its
accessories.
Make sure the speed dome is power off before connecting the cables.
Steps:
1. Drill four screw holes for φ16 expansion screws in the wall, and fix the installation
plate onto the wall by inserting the four M12×130 expansion screws into the wall.
Make sure that mark is upward.
2. Insert the flag washer and the spring washer. Then tighten the four screws to secure
the installation plate as shown in Figure 2-5.
Cable Outlet
168
214
Unit:mm
Grounding
Screw
Figure 2-5 Install the Installation Plate

Ex
Explosion-proof Dome·Quick Start Guide
8
3. Route the cables into the bracket body. Insert three preassemble screws into the
preassemble screw holes on the cable joint (do not tighten the preassemble screws)
as shown in Figure 2-6.
Preassemble Screws
Cable Joint
Figure 2-6 Insert the Screws
4. Align the bracket with the cable joint and rotate the bracket clockwise until three
preassemble screws on the cable joint hooks onto three slots on the bracket as
shown in Figure 2-7.
Slots
Bracket
Figure 2-7 Rotate the Bracket
5. Screw three fixing screws into the fixing screws holes on the bracket. Then tighten
three preassemble screws to secure the speed dome as shown in Figure 2-8.
Three Preassemble
Screws
Three Fixing
Screws
Figure 2-8 Secure the Speed Dome
6. Install the bracket to the installation plate.

Ex
Explosion-proof Dome·Quick Start Guide
9
1) Hang the safety rope to the speed dome and the hook on the bracket.
2) Route the cables of the speed dome through the bracket and connect the
corresponding cables.
3) Hang the speed dome to the bracket by aligning the holes of bracket with the
screws and move the speed dome downward to secure the speed dome as
shown as Figure 2-9.
Figure 2-9 Install Bracket to Installation Plate
7. Secure the bracket by putting in the flat washer and the spring washer. Then tighten
the gland nut.
Explosion-proof Junction Box
(Optional)
Figure 2-10 Secure the Bracket
8. Remove the protective film on the bubble after the installation is finished.
2.3.3 Pendant Mounting
Before you start:
Make sure the ceiling is thick enough to withstand the expansion screws.
Make sure the ceiling must be strong enough to withstand more than eight times
the weight of the dome and its accessories.
There must be enough space for installing the explosion-proof dome and its
accessories.
Make sure the speed dome is power off before connecting the cables.
Steps:

Ex
Explosion-proof Dome·Quick Start Guide
10
1. Drill four screw holes for φ16 expansion screws in the wall, and fix the installation
plate onto the wall by inserting the four M12×130 expansion screws into the wall.
Make sure that mark is at the cable outlet and is upward.
2. Insert the flag washer and the spring washer. Then tighten the four screws to secure
the installation plate as shown in Figure 2-11.
Cable Outlet
168
214
4-Φ16
Unit:mm
Figure 2-11 Install the Installation Plate
3. Route the cables into the bracket body. Insert three preassemble screws into the
preassemble screw holes on the cable joint (do not tighten the preassemble screws)
as shown in Figure 2-12.
Preassemble Screws
Cable Joint
Figure 2-12 Insert the Screws
4. Align the bracket with the cable joint and rotate the bracket clockwise until three
preassemble screws on the cable joint hooks onto three slots on the bracket as
shown in Figure 2-13.

Ex
Explosion-proof Dome·Quick Start Guide
11
Slots
Bracket
Figure 2-13 Rotate the Bracket
5. Screw three fixing screws into the fixing screws holes on the bracket. Then tighten
three preassemble screws to secure the speed dome as shown in Figure 2-14.
Three Preassemble
Screws
Three Fixing
Screws
Figure 2-14 Secure the Speed Dome
6. Install the bracket to the installation plate.
1) Hang the safety rope to the speed dome and the hook on the bracket.
2) Route the cables of the speed dome through the bracket and connect the
corresponding cables.
3) Hang the speed dome to the bracket by aligning the holes of bracket with the
screws and move the speed dome following the direction in Figure 2-15 to
secure the speed dome.
Figure 2-15 Install Bracket to Installation Plate

Ex
Explosion-proof Dome·Quick Start Guide
12
7. Secure the bracket by putting in the flat washer and the spring washer. Then tighten
the gland nut.
Explosion-proof
Junction Box (Optional)
Figure 2-16 Secure the Bracket
8. Remove the protective film on the bubble after the installation is finished.
2.3.4 Cable Entry Installation
Purpose:
To ensure the explosion-proof performance of the speed dome, you shall route the cable
through the cable entry to protect the cables after speed dome installation.
Steps:
1. Loosen and take off the gland nut of the cable entry.
2. Seal the cable entry by routing the cables through the sealing ring, washer, and
gland nut in order as shown in Figure 2-17.
Sealing
Ring Washer Gland Nut
Figure 2-17 Seal the Cable Entry
3. Weld the cables heads back.