HIK VISION DS-2TD2667-35/PI User manual

Thermal Network Camera
User Manual

Thermal Network Camera User Manual
i
Legal Information
© 2019 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version of this Manual at the Hikvision website
(https://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporting the
Product.
Trademarks
and other Hikvision's trademarks and logos are the properties of
Hikvision in various jurisdictions.
Other trademarks and logos mentioned are the properties of their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND
“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR
A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT
WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT
LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS,
AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR

Thermal Network Camera User Manual
ii
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.

Thermal Network Camera User Manual
iii
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Danger
Indicates a hazardous situation which, if not avoided, will or could
result in death or serious injury.
Caution
Indicates a potentially hazardous situation which, if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Note
Provides additional information to emphasize or supplement
important points of the main text.

Thermal Network Camera User Manual
iv
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger
or property loss.
Laws and Regulations
●Use of the product must be in strict compliance with the local electrical safety regulations.
Transportation
●Keep the device in original or similar packaging while transporting it.
●Keep all wrappers after unpacking them for future use. In case of any failure occurred, you need
to return the device to the factory with the original wrapper. Transportation without the
original wrapper may result in damage on the device and the company shall not take any
responsibilities.
●Do not drop the product or subject it to physical shock. Keep the device away from magnetic
interference.
Power Supply
●Please purchase the charger by yourself. Input voltage should meet the Limited Power Source
(12 VDC, 24 VAC, or PoE(802.3af)) according to the IEC61010-1 standard. Please refer to
technical specifications for detailed information.
●Make sure the plug is properly connected to the power socket.
●DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards
caused by overload.
Battery
●The built-in battery cannot be dismantled. Please contact the manufacture for repair if
necessary.
●For long-term storage of the battery, make sure it is fully charged every half year to ensure the
battery quality. Otherwise, damage may occur.
Maintenance
●If the product does not work properly, please contact your dealer or the nearest service center.
We shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.
●A few device components (e.g., electrolytic capacitor) require regular replacement. The average
lifespan varies, so periodic checking is recommended. Contact your dealer for details.
●Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
●If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the device may be impaired.
Using Environment
●Make sure the running environment meets the requirement of the device. The operating

Thermal Network Camera User Manual
v
temperature shall be -40°C to 65°C (-40°F to 149°F), and the operating humidity shall be 95% or
less, no condensing.
●DO NOT expose the device to high electromagnetic radiation or dusty environments.
●DO NOT aim the lens at the sun or any other bright light.
Emergency
●If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the
power cable, and contact the service center.
Manufacture Address
No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
Hangzhou Hikvision Digital Technology Co.,Ltd

Thermal Network Camera User Manual
vi
Contents
Chapter 1 Overview....................................................................................................................1
1.1 Brief Description....................................................................................................................1
1.2 Function .................................................................................................................................1
Chapter 2 Device Activation and Accessing .................................................................................2
2.1 Activate the Device via SADP................................................................................................2
2.2 Activate the Device via Browser...........................................................................................2
2.3 Login.......................................................................................................................................3
2.3.1 Install Plug-in..............................................................................................................3
2.3.2 Illegal Login Lock.........................................................................................................3
Chapter 3 Temperature Measurement........................................................................................5
3.1 Notice.....................................................................................................................................5
3.2 Thermography Configuration Flow Chart.............................................................................6
3.3 Automatic Thermography.....................................................................................................7
3.3.1 Set Thermography Parameters..................................................................................7
3.3.2 Set Normal Mode .......................................................................................................8
3.3.3 Object Missing............................................................................................................9
3.3.4 Set Thermography Rule..............................................................................................9
3.3.5 Point Thermography ................................................................................................10
3.3.6 Line Thermography ..................................................................................................10
3.3.7 Area Thermography .................................................................................................10
3.4 Set Shielded Region.............................................................................................................10
3.5 Manual Thermography........................................................................................................11
Chapter 4 Fire Source Detection ...............................................................................................12
4.1 Recommended Scene..........................................................................................................12
4.2 Set Fire Detection Parameters............................................................................................12
Chapter 5 Perimeter Protection................................................................................................14
5.1 Flow Chart of Perimeter Protection ...................................................................................14
5.2 Set VCA Parameters ............................................................................................................15
5.3 Calibration ...........................................................................................................................15

Thermal Network Camera User Manual
vii
5.3.1 Calibrate Automatically ...........................................................................................15
5.3.2 Calibrate Manually...................................................................................................16
5.3.3 Verify the Calibration Result....................................................................................17
5.4 Set Rules ..............................................................................................................................17
5.5 Advanced Configuration......................................................................................................19
5.6 Set Global Size Filter............................................................................................................20
Chapter 6 Event and Alarm.......................................................................................................21
6.1 Set Motion Detection..........................................................................................................21
6.1.1 Normal Mode ...........................................................................................................21
6.1.2 Expert Mode.............................................................................................................22
6.2 Set Video Tampering Alarm................................................................................................23
6.3 Set Alarm Input....................................................................................................................24
6.4 Set Exception Alarm ............................................................................................................25
6.5 Detect Audio Exception.......................................................................................................25
Chapter 7 Arming Schedule and Alarm Linkage.........................................................................27
7.1 Set Arming Schedule ...........................................................................................................27
7.2 Linkage Method Settings.....................................................................................................27
7.2.1 Trigger Alarm Output ...............................................................................................27
7.2.2 FTP/NAS/Memory Card Uploading .........................................................................28
7.2.3 Send Email ................................................................................................................29
7.2.4 Notify Surveillance Center .......................................................................................30
7.2.5 Trigger Recording .....................................................................................................30
7.2.6 Set Audible Alarm Output........................................................................................30
7.2.7 Set Flashing Alarm Light Output..............................................................................30
Chapter 8 Live View..................................................................................................................32
8.1 Live View Parameters..........................................................................................................32
8.1.1 Window Proportion .................................................................................................32
8.1.2 Live View Stream Type.............................................................................................32
8.1.3 Start Digital Zoom ....................................................................................................32
8.1.4 Quick Set Live View ..................................................................................................32
8.1.5 Lens Parameters Adjustment...................................................................................33

Thermal Network Camera User Manual
viii
8.1.6 Light ..........................................................................................................................33
8.1.7 Wiper ........................................................................................................................33
8.1.8 Lens Initialization .....................................................................................................33
8.1.9 Auxiliary Focus..........................................................................................................34
8.2 Set Transmission Parameters .............................................................................................34
Chapter 9 Video and Audio.......................................................................................................36
9.1 Video Settings......................................................................................................................36
9.1.1 Stream Type..............................................................................................................36
9.1.2 Video Type................................................................................................................36
9.1.3 Resolution.................................................................................................................36
9.1.4 Bitrate Type and Max. Bitrate .................................................................................37
9.1.5 Video Quality............................................................................................................37
9.1.6 Frame Rate ...............................................................................................................37
9.1.7 Video Encoding.........................................................................................................37
9.1.8 Smoothing.................................................................................................................38
9.1.9 Display VCA Info.......................................................................................................38
9.1.10 Audio Settings ........................................................................................................39
9.1.11 Two-way Audio.......................................................................................................39
9.1.12 Set ROI ....................................................................................................................40
9.2 Display Settings ...................................................................................................................40
9.2.1 Image Adjustment (Thermal Channel) ....................................................................41
9.2.2 DNR...........................................................................................................................41
9.2.3 Set Palette ................................................................................................................42
9.2.4 Set Target Color........................................................................................................42
9.2.5 DDE............................................................................................................................42
9.2.6 Brightness Sudden Change.......................................................................................43
9.2.7 Enhance Regional Image ..........................................................................................43
9.2.8 Mirror........................................................................................................................43
9.2.9 Video Standard.........................................................................................................43
9.2.10 Digital Zoom ...........................................................................................................43
9.2.11 Scene Mode............................................................................................................43

Thermal Network Camera User Manual
ix
9.3 OSD ......................................................................................................................................44
9.4 Set Privacy Mask..................................................................................................................44
9.5 Overlay Picture....................................................................................................................45
9.6 Set Manual DPC (Defective Pixel Correction).....................................................................45
Chapter 10 Video Recording and Picture Capture......................................................................46
10.1 Storage Settings.................................................................................................................46
10.1.1 Set Memory Card ...................................................................................................46
10.1.2 Set NAS ...................................................................................................................46
10.1.3 Set FTP ....................................................................................................................47
10.1.4 Set Cloud Storage ...................................................................................................47
10.2 Video Recording ................................................................................................................48
10.2.1 Record Automatically.............................................................................................48
10.2.2 Record Manually ....................................................................................................49
10.2.3 Playback and Download Video ..............................................................................50
10.3 Capture Configuration.......................................................................................................50
10.3.1 Capture Automatically ...........................................................................................50
10.3.2 Capture Manually...................................................................................................51
10.3.3 View and Download Picture ..................................................................................51
Chapter 11 Network Settings....................................................................................................52
11.1 TCP/IP ................................................................................................................................52
11.1.1 Multicast Discovery................................................................................................53
11.2 Port ....................................................................................................................................53
11.3 Port Mapping.....................................................................................................................54
11.3.1 Set Auto Port Mapping ..........................................................................................54
11.3.2 Set Manual Port Mapping......................................................................................54
11.4 Multicast............................................................................................................................55
11.5 SNMP .................................................................................................................................55
11.6 Access to Device via Domain Name..................................................................................55
11.7 Access to Device via PPPoE Dial Up Connection ..............................................................56
11.8 Enable Hik-Connect Service on Camera............................................................................57
11.8.1 Enable Hik-Connect Service via Web Browser ......................................................57

Thermal Network Camera User Manual
x
11.8.2 Enable Hik-Connect Service via SADP Software....................................................58
11.8.3 Access Camera via Hik-Connect.............................................................................58
11.9 Set ISUP..............................................................................................................................58
11.10 Set ONVIF.........................................................................................................................59
11.11 Set HTTP Listening...........................................................................................................59
Chapter 12 System and Security ...............................................................................................60
12.1 View Device Information ..................................................................................................60
12.2 Search and Manage Log ....................................................................................................60
12.3 Import and Export Configuration File...............................................................................60
12.4 Export Diagnose Information............................................................................................61
12.5 Reboot ...............................................................................................................................61
12.6 Restore and Default ..........................................................................................................61
12.7 Upgrade .............................................................................................................................61
12.8 View Open Source Software License................................................................................62
12.9 Time and Date ...................................................................................................................62
12.9.1 Synchronize Time Manually...................................................................................62
12.9.2 Set NTP Server........................................................................................................62
12.9.3 Set DST....................................................................................................................63
12.10 Set RS-232........................................................................................................................63
12.11 Set RS-485........................................................................................................................63
12.12 Set Same Unit ..................................................................................................................64
12.13 Security ............................................................................................................................64
12.13.1 Authentication......................................................................................................64
12.13.2 Security Audit Log ................................................................................................65
12.13.3 Set IP Address Filter .............................................................................................65
12.13.4 Set SSH..................................................................................................................66
12.13.5 Set HTTPS..............................................................................................................66
12.13.6 Set QoS .................................................................................................................67
12.13.7 Set IEEE 802.1X.....................................................................................................68
12.14 User and Account ............................................................................................................68
12.14.1 Set User Account and Permission........................................................................68

Thermal Network Camera User Manual
xi
Chapter 13 Appendix................................................................................................................70
13.1 Common Material Emissivity Reference ..........................................................................70
13.2 Device Command...............................................................................................................70
13.3 Device Communication Matrix .........................................................................................71

Thermal Network Camera User Manual
1
Chapter 1 Overview
1.1 Brief Description
Thermal network camera equipped with built-in GPU which supports intelligent perimeter
protection algorithm, can realize high-precision VCA detection and real-time alarm. It is applied to
perimeter protection and fire-prevention purposes in critical infrastructures such as community,
villa, construction site, factory, 4S stores, and so on. The pre-alarm system helps you discover
unexpected events immediately and protects your property.
1.2 Function
This section introduces main functions of the device.
Fire Detection
Device can detect the dynamic fire source in the scene and output pre-alarm and alarm to protect
the property.
Temperature Measurement
Device can measure the actual temperature of the spot being monitored. The device alarms when
temperature exceeds the temperature threshold value.
VCA
Device can do perimeter protection. Multiple rules can be configured for different requirements.
Smoking Detection
Device can detect the smoking behavior and alarm.

Thermal Network Camera User Manual
2
Chapter 2 Device Activation and Accessing
To protect the security and privacy of the user account and data, you should set a login password
to activate the device when access the device via network.
Note
Refer to the user manual of the software client for the detailed information about the client
software activation.
2.1 Activate the Device via SADP
Search and activate the online devices via SADP software.
Before You Start
Access www.hikvision.com to get SADP software to install.
Steps
1. Connect the device to network using the network cable.
2. Run SADP software to search the online devices.
3. Check Device Status from the device list, and select Inactive device.
4. Create and input the new password in the password field, and confirm the password.
Caution
We highly recommend you create a strong password of your own choosing (using a minimum of
8 characters, including upper case letters, lower case letters, numbers, and special characters)
in order to increase the security of your product. And we recommend you reset your password
regularly, especially in the high security system, resetting the password monthly or weekly can
better protect your product.
5. Click OK.
Device Status changes into Active.
6. Optional: Change the network parameters of the device in Modify Network Parameters.
2.2 Activate the Device via Browser
You can access and activate the device via the browser.
Steps
1. Connect the device to the PC using the network cables.
2. Change the IP address of the PC and device to the same segment.

Thermal Network Camera User Manual
3
Note
The default IP address of the device is 192.168.1.64. You can set the IP address of the PC from
192.168.1.2 to 192.168.1.253 (except 192.168.1.64). For example, you can set the IP address of
the PC to 192.168.1.100.
3. Input 192.168.1.64 in the browser.
4. Set device activation password.
Caution
We highly recommend you create a strong password of your own choosing (using a minimum of
8 characters, including at least three of the following categories: upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
5. Click OK.
6. Input the activation password to log in to the device.
7. Optional: Go to Configuration → Network → Basic → TCP/IP to change the IP address of the
device to the same segment of your network.
2.3 Login
Log in to the device via Web browser.
2.3.1 Install Plug-in
You can access the device by installing plug-in.
Steps
1. Input IP address of the device in web browser and the login window will pop up.
2. Install the plug-in according to the prompt.
3. Open the web browser again and input IP address of the device.
4. Input user name and password, and click Login.
Help
Get online help document of the device.
Logout
You can exit safely.
2.3.2 Illegal Login Lock
It helps to improve the security when accessing the device via Internet.
The admin user can set the login attempts with the wrong password. When your login attempts

Thermal Network Camera User Manual
4
with the wrong password reach the set times, the device is locked.
Go to Configuration → System → Security → Security Service, and enable Enable Illegal Login
Lock, and set the illegal login attempts.

Thermal Network Camera User Manual
5
Chapter 3 Temperature Measurement
When you enable this function, the device measures the actual temperature of the scene. It
alarms when temperature exceeds the temperature threshold value.
3.1 Notice
This part introduces the notices of configuring temperature measurement function.
●The target surface should be as vertical to the optical axis as possible. It is recommended that
the angle of oblique image plane should be less than 45°.
●The target image pixels should be more than 5 × 5.
●If multiple presets will be taken for temperature measurement, it is recommended to set the
patrol time above 20 s.
●Please select line thermography or area thermography for a certain area temperature
measurement. The point thermography is not recommended in case of deviation occurred
during device movement to affect the accuracy of temperature measurement.

Thermal Network Camera User Manual
6
3.2 Thermography Configuration Flow Chart
This part introduces the process of configuring temperature measurement.
Figure 3-1 Thermography Configuration Flow Chart

Thermal Network Camera User Manual
7
Note
Please refer to the Quick Start Guide for detailed information of Installation part in the flow chart.
3.3 Automatic Thermography
Configure the temperature measurement parameters and temperature measurement rules. The
device can measure the actual temperature and output alarms when temperature exceeds the
alarm threshold value.
3.3.1 Set Thermography Parameters
Configure the parameters of temperature measurement.
Before You Start
Go to Configuration → System → Maintenance → VCA Resource Type, select Temperature
Measurement+Perimeter Protection.
Steps
1. Go to Configuration → Local, and enable Display Temperature Info. .
Display Temperature Info.
Select Yes to display temperature information on live view.
Enable Rules to display the rules information on live view.
2. Click Save.
3. Go to Configuration → Temperature Measurement → Basic Settings to configure parameters.
Enable Temperature Measurement
Check to enable temperature measurement function.
Enable Color-Temperature
Check to display Temperature-Color Ruler in live view.
Display Temperature Info. on Stream
Check to display temperature information on the stream.
Display Max./Min./Average Temperature
Check to display maximum/minimum/average temperature information on live view when
the temperature measurement rule is line or area.
Position of Thermometry Info
Select the position of temperature information showed on the live view.
●Near Target: display the information beside the temperature measurement rule.
●Top Left: display the information on the top left of screen.

Thermal Network Camera User Manual
8
Add Original Data on Capture
Check to add data on alarm triggered capture of thermal channel.
Add Original Data on Stream
Check to add original data on thermal view.
Data Refresh Interval
It means the refresh interval of temperature information.
Unit
Display temperature with Degree Celsius (°C)/Degree Fahrenheit (°F)/Degree Kelvin (K).
Temperature Range
Select the temperature measurement range.
Version
View the version of current algorithm.
4. Click Save.
3.3.2 Set Normal Mode
This function is used to measure the temperature of the whole scene and alarm.
Steps
1. Go toConfiguration → Temperature Measurement → Basic Settings, and check Enable
Temperature Measurement.
2. Refer to Set Thermography Parameters to set the parameters.
3. Go toConfiguration → Temperature Measurement → Advanced Settings, and select Normal.
4. Configure the parameters of normal mode.
Emissivity
Set the emissivity of your target. The emissivity of each object is different.
Distance
The distance between the target and the device.
Pre-Alarm Threshold
When the temperature of target exceeds the pre-alarm threshold, and this status keeps more
than Filtering Time, it triggers pre-alarm.
Alarm Threshold
When the temperature of target exceeds the alarm threshold, and this status keeps more
than Filtering Time, it triggers alarm.
Pre-Alarm Output and Alarm Output
Check Pre-Alarm Output and Alarm Output to link the pre-alarm or alarm with the connected
alarm device.