HIK VISION TURBO HD H0T Series User manual

TURBO HD
H0T Series Bullet Caera
Use Maual
User Manual
Thak ou fo puhasig ou podut. If thee ae a
uestios, o euests, do ot hesitate to otat the
deale.
This aual applies to the odels elo:
Type
Model
Type I Caera
DS-CEHT-ITE
Type II
Caera
DS-CEHT-ITE
DS-CEHT-ITE
DS-CEHT-ITE
This aual a otai seeal tehial ioet
plaes o pitig eos, ad the otet is sujet to
hage ithout otie. The updates ill e added to
the e esio of this aual. We ill eadil ipoe
o update the poduts o poedues desied i the
aual.


Regulatory Iforatio
FCC Iforatio
Please take attetio that hages o odifiatio ot
epessl appoed  the pat esposile fo
opliae ould oid the use’s authoit to opeate
the euipet.
FCC copliace: This euipet has ee tested ad
foud to opl ith the liits fo a Class A digital
deie, pusuat to pat  of the FCC Rules. These
liits ae desiged to poide easoale potetio
agaist haful itefeee he the euipet is
opeated i a oeial eioet. This euipet
geeates, uses, ad a adiate adio feue eeg
ad, if ot istalled ad used i aodae ith the
istutio aual, a ause haful itefeee to
adio ouiatios. Opeatio of this euipet i a
esidetial aea is likel to ause haful itefeee i
hih ase the use ill e euied to oet the
itefeee at his o epese.
FCC Coditios
This deie oplies ith pat  of the FCC Rules.
Opeatio is sujet to the folloig to oditios:
. This deie a ot ause haful itefeee.
. This deie ust aept a itefeee eeied,
iludig itefeee that a ause udesied
opeatio.
EU Cofority Stateet
This podut ad - if appliale - the
supplied aessoies too ae aked ith
"CE" ad opl theefoe ith the
appliale haoized Euopea
stadads listed ude the Lo Voltage Dietie
//EU, the EMC Dietie //EU.
//EU WEEE dietie: Poduts
aked ith this sol aot e
disposed of as usoted uiipal aste i
the Euopea Uio. Fo pope elig,
etu this podut to ou loal supplie
upo the puhase of euialet e
euipet, o dispose of it at desigated olletio
poits. Fo oe ifoatio see: .elethis.ifo.
//EC atte dietie: This
podut otais a atte that aot e
disposed of as usoted uiipal aste i
the Euopea Uio. See the podut
douetatio fo speifi atte
ifoatio. The atte is aked ith this sol,
hih a ilude letteig to idiate adiu Cd,
lead P, o eu Hg. Fo pope elig, etu
the atte to ou supplie o to a desigated
olletio poit. Fo oe ifoatio see:
.elethis.ifo.
Idustry Caada ICES-003 Copliace
This deie eets the CAN ICES- A/NMB-A
stadads euieets.
Warig
This is a lass A podut. I a doesti eioet this
podut a ause adio itefeee i hih ase the
use a e euied to take adeuate easues.

Safety Istructio
These istutios ae iteded to esue that use a
use the podut oetl to aoid dage o popet
loss.
The peautio easue is diided ito Waigs ad
Cautios.
Warigs: Seious iju o death a ou if a of
the aigs ae egleted.
Cautios: Iju o euipet daage a ou if a
of the autios ae egleted.
Warigs
I the use of the deie, ou ust e i stit
opliae ith the eletial safet egulatios of
the atio ad egio.
Iput oltage should eet oth the SELV Safet Eta
Lo Voltage ad the Liited Poe Soue ith 
VDC aodig to the IEC- stadad. Refe to
tehial speifiatios fo detailed ifoatio.
Do ot oet ultiple deies to oe poe
adapte to aoid oe-heatig o a fie hazad aused
 oeload.
Make sue that the plug is fil oeted to the
poe soket.
Make sue that the deie is fil fied if all
outig o eilig outig is adopted.
If soke, odo o oise ise fo the deie, tu off
the poe at oe ad uplug the poe od, ad
the otat the seie ete.
Nee attept to disassele the aea 
upofessioal pesoal.
Cautios
Do ot dop the aea o sujet it to phsial
shok.
Do ot plae the aea i eteel hot, old the
opeatig tepeatue shall e -°C to °C, dust
o dap loatios, ad do ot epose it to high
eletoageti adiatio.
Do ot touh seo odules ith figes.
If leaig is eessa, use lea loth ith a it of
ethaol ad ipe it getl.
Do ot ai the aea at the su o eta ight
plaes.
The seso a e ued out  a lase ea, so
he a lase euipet is i usig, ake sue that
the sufae of seso ill ot e eposed to the lase
ea.
Do ot epose the deie to high eletoageti
adiatio o eteel hot, old, dust o dap
eioet.
To aoid heat auulatio, good etilatio is
euied fo the opeatig eioet.
Warigs Follo
these safeguads to
peet seious iju
o death.
Cautios Follo these
peautios to peet
potetial iju o
ateial daage.

Keep the aea aa fo liuid hile i use fo
o-ate-poof deie.
While i delie, the aea shall e paked i its
oigial pakig, o pakig of the sae tetue.
Mark Descriptio
Tale - Mak Desiptio
Mark
Descriptio
DC Voltage
1Itroductio
1.1 Product Features
The ai featues ae as follos:
High pefoae CMOS seso
Lo illuiatio, . Lu@F., AGC ON,  Lu
ith IR
IR ut filte ith auto sith
OSD eu ith ofiguale paaetes
Auto hite alae
iteal shoizatio
SMART IR ode
PoC ith -E
-ais adjustet
Note:
Fo the odels hae PoC futio, ou a oet the
ideo ale of the aea to the PoC deie to get the
poe suppl.
1.2 Overview
This aual applies to to tpes of ullet aeas.
The oeies of eah tpe ae sho i the figues
elo.
1.2.1 Overview of Type I Camera
Main Body
Phototransistor
Lens
Bracket
Video Cable
Power Cord
12 VDC
Figure 1-1 Oeie of Tpe I Caea
1.2.2 Overview of Type II Camera
Camera
Bracket
Video Cable
Power Cord
12 VDC
Lens
Phototransistor
Figure 1-2 Oeie of Tpe II Caea

2Istallatio
Before you start:
Make sue that the deie i the pakage is i good
oditio ad all the assel pats ae iluded.
Make sue that all the elated euipet is poe-off
duig the istallatio.
Chek the speifiatio of the poduts fo the
istallatio eioet.
Chek hethe the poe suppl is athed ith
ou poe output to aoid the daage.
Make sue the all is stog eough to ithstad
thee ties the eight of the aea ad the
aket.
If the all is eet, iset epasio olts efoe
istallig the aea. If the all is oode, use
self-tappig ses to seue the aea.
If the podut does ot futio popel, otat
ou deale o the eaest seie ete. Do NOT
disassele the aea fo epai o aiteae 
ouself.
2.1 Installation of Type I Camera
2.1.1 Ceiling/Wall Mounting without Junction Box
Steps:
1. Paste the dill teplate supplied to the plae
hee ou at to istall the aea.
2. Dill the se holes ad the ale hole optioal i
the eilig/all aodig to the dill teplate.
Template
Cable
Hole
Side Opening
Screw
Hole
Figure 2-1 Dill Teplate
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable.
3. Attah the aket to the eilig/all ad seue the
aea ith supplied ses.
Fixing Screw
Adjusting Screws
Figure 2-2 Fi the Caea to the Ceilig
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall/ceiling, expansion bolts are
required to fix the camera. For wooden
wall/ceiling, self-tapping screws are required.
4. Route the ales though the ale hole, o the side
opeig.

5. Coet the oespodig poe od, ad ideo
ale.
6. Poe o the aea to hek hethe the iage
o the oito is gotte fo the optiu agle. If
ot, adjust the aea aodig to the figue elo
to get a optiu agle.
P Screw
T Screw
R Screw
Tilt Position
[0° to 180°]
Pan Position
[0° to 360°]
Rotation Position
[0° to 360°]
Figure 2-3 -ais Adjustet
1). Loose the P se to adjust the pa positio [°
to °]. Tighte the se afte opletig the
adjustet.
2). Loose the T se to adjust the tilt positio [°
to °]. Tighte the se afte opletig the
adjustet.
3). Loose the R se ad otate the aea [° to
°]. Tighte the se afte opletig the
adjustet.
2.1.2 Ceiling/Wall Mounting with Junction Box
Before you start:
You eed to puhase a jutio o sepaatel.
Steps:
1. Paste the drill template on the eilig/all.
2. Drill screw holes and the cable hole in the
eilig/all according to the holes of the drill
template.
Template
Cable
Hole
Side Opening
Screw
Hole
Figure 2-4 Dill Teplate of Jutio Bo
3. Take apart the junction box, and align the screw
holes of the bullet camera with those on the
Jutio o’ oe.
4. Fi the aea o the jutio o’s oe with
supplied screws.
Junction
Box Cover
Figure 2-5 Fix the Camera on the Junction Bo’s Cover
5. Attah the jutio o od to the eilig/all 
aligig the se holes of the jutio o.

6. Seue the jutio o’s od ith supplied ses
o the eilig/all.
Junction Box
Body
Figure 2-6 Fix the Junction Box to the Wall/Ceiling
7. Route the cables through the bottom cable hole, or
the side cable hole of the junction box.
8. Combine the junction box cover with its body.
Figure 2-7 Fix the Junction Box Cover back to its
Body
9. Repeat the step 5 and 6 of 2.1.1 Ceiling/Wall
Mounting without Junction Box to complete the
installation.
2.2 Installation of Type II Camera
2.2.1 Ceiling/Wall Mounting without Junction Box
Steps:
1. Paste the dill teplate supplied to the plae
hee ou at to istall the aea.
2. Dill the se holes aodig to the dill teplate,
ad the ale hole optioal o the eilig.
Template
Cable
Hole
Side Opening
Screw
Hole
Figure 2-8 Dill Teplate
Note:
Dill the ale hole i the ete of the dill teplate,
he adoptig eilig outlet to oute the ale.
3. Route the ales though the ale hole optioal
o the side opeig.
4. Fi the aea to the eilig ith supplied ses.

Figure 2-9 Fi the Caea to the Ceilig
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall/ceiling, expansion bolts are
required to fix the camera. For wooden
wall/ceiling, self-tapping screws are required.
5. Coet the oespodig poe od, ad ideo
ale.
6. Poe o the aea to hek hethe the iage
o the oito is gotte fo the optiu agle. If
ot, adjust the sueillae agle.
0° to 360°
0° to 360°
0° to 180°
Figure 2-10 -Ais Adjustet
1). Loose the No. adjustig se to adjust the
pa positio [° to °]. Tighte the No.
adjustig se.
2). Loose the No. adjustig se to adjust the
tiltig positio [° to°]. Tighte the No. 
adjustig se.
3). Loose the No. adjustig se to adjust the
otatio positio [° to °]. Tighte the No.
adjustig se.
2.2.2 Ceiling/Wall Mounting with Junction Box
Before you start:
You eed to puhase a jutio o sepaatel.
Steps:
1. Paste the dill teplate o the eilig/all.
2. Dill se holes ad the ale hole optioal i the
eilig/all aodig to the holes of the dill
teplate.
Note:
Dill the ale hole, he adoptig eilig outlet to
oute the ale.
3. Take apat the jutio o, ad alig the se
holes of the ullet aea ith those o the
Jutio o’s oe.
4. Fi the aea o the jutio o’s oe ith
thee supplied ses.
5. Seue the jutio o’s od ith supplied ses
o the eilig/all.

Figure 2-11 Install the Junction Box
6. Route the cables through the bottom cable hole, or
the side cable hole of the junction box.
7. Coie the jutio o oe ith its od ith
supplied ses o the jutio o’s oe.
Figure 2-12 Coie the Jutio Bo’s Coe ith its
Body
8. Repeat the step  ad  of .. Ceiling/Wall
Mounting without Junction Box to oplete the
istallatio.

3Meu Descriptio
Purpose:
Call the eu  likig utto o the PTZ Cotol
itefae, o all peset No..
Steps:
1. Coet the aea ith the TVI DVR, ad the
oito, sho as the figue -.
Camera
TVI DVR
Monitor
Figure 3-1 Coetio
2. Poe o the aalog aea, TVI DVR, ad the
oito to ie the iage o the oito.
3. Clik PTZ Cotol to ete the PTZ Cotol itefae.
4. Call the aea eu  likig utto, o all
peset No. .
MAIN MENU
VIDEO
SETTINGS
FACTORY
DEFAULT
EXIT
EXPOSURE MODE
CONTRAST
SHARPNESS
SATURATION
DNR
MIRROR
BACK
AGC
EXPOSURE
VIDEO
FORMAT
BACK
EXIT
SAVE & EXIT
WHITE
BALANCE
BRIGHTNESS
SAVE & EXIT
EXIT
SAVE & EXIT
DAY/NIGHT COLOR
B/W
AUTO
BACK
EXIT
SAVE & EXIT
Figure 3-2 Mai Meu Oeie
5. Clik the dietio ao to otol the aea.
1). Clik up/do dietio utto to selet the
ite.
2). Clik Iis + to ofi the seletio.

3). Clik left/ight dietio utto to adjust the
alue of the seleted ite.
3.1 VIDOE FORMAT
You a set the ideo foat as MP@fps,
MP@fps, MP@fps, MP@fps, ad
MP@fps.
3.2 EXPOSURE
Eposue desies the ightess-elated paaetes,
hih a e adjusted  EXPOSURE MODE, ad AGC.
EXPOSURE
EXPOSURE MODE
AGC
BACK
EXIT
SAVE & EXIT
GLOBAL
LOW



Figure 3-3 EXPOSURE
EXPOSURE MODE
You a set the EXPOSURE MODE as GLOBAL, BLC, ad
DWDR.
GLOBAL
GLOBAL efes to the oal eposue ode hih
pefos eposue aodig to the hole iage
ightess.
BLC Backlight Copesatio
BLC Baklight Copesatio opesates light fo the
fot ojet to ake it lea, ut this a ause the
oe-eposue of the akgoud, hee the light is
stog.
DWDR Digital Wide Dyaic Rage
The DWDR helps the aea poide lea iages ee
ude aklight iustaes. Whe oth e ight
ad e dak aeas siultaeousl eist i the iage,
DWDR alaes the ightess leel of the hole iage
to poide lea iages ith details.
AGC (Automatic Gain Control)
It optiizes the lait of the iage i poo light
oditios. The AGC leel a e set as HIGH, MEDIUM,
o LOW. Selet OFF to disale the AGC futio.
Note:
The oise ill e aplified, he the AGC is ON.
3.3 DAY/NIGHT
COLOR, BW Blak White, ad AUTO ae seletale fo
DAY/NIGHT sith.
COLOR
The iage is oloed i da ode all the tie.
B & W (Black and White)
The iage is lak ad hite all the tie, ad the IR
LIGHT tus o i the poo light oditios.
You a tu o/off the IR LIGHT ad set the alue of
SMART IR i this eu

DAY/NIGHT
MODE
IR LIGHT
SMART IR
BACK
EXIT
SAVE & EXIT
B & W
ON
2



Figure 3-4 B & W
IR LIGHT
You a tu o/off the IR LIGHT to eet the
euieets of diffeet iustaes.
SMART IR
The Sart IR futio is used to adjust the light to its
ost suitale itesit, ad peet the iage fo
oe eposue. The SMART IR alue a e adjusted
fo  to . The highe the alue is, the oe oious
effets ae.
AUTO
Autoatiall sith Colo, o BW Blak ad White
aodig to atual see ightess.
You a tu o/off the IR LIGHT, ad set the alue of
SMART IR i this eu.
DAY/NIGHT
MODE
IR LIGHT
SMART IR
D àN THRESHOLD
N àD THRESHOLD
BACK
EXIT
SAVE & EXIT
AUTO
ON
2
2
7



Figure 3-5 AUTO
IR LIGHT
You a tu o/off the IR LIGHT to eet the
euieets of diffeet iustaes.
SMART IR
The Sart IR futio is used to adjust the light to its
ost suitale itesit, ad peet the iage fo
oe eposue. The SMART IR alue a e adjusted
fo  to . The highe the alue is, the oe oious
effets ae.
DàN Threshold Day to Night Threshold
Day to Night Threshold is used to otol the sesitiit
of sithig the da ode to the ight ode. You a
set the alue fo  to . The lage the alue is, the
oe sesitie the aea is.
NàD Threshold Night to Day Threshold
Night to Day Threshold is used to otol the sesitiit
of sithig the ight ode to the da ode. You a
set the alue fo  to . The lage the alue is, the
oe sesitie the aea is.
3.4 VIDEO SETTINGS
Moe the uso to VIDEO SETTINGS ad lik Iris+ to
ete the sueu. WHITE BALANCE, BRIGHTNESS,

CONTRAST, SHARPNESS, SARUTATION, DNR, ad
MIRROR ae adjustale.
VIDEO SETTINGS
WHITE BALANCE
BRIGHTNESS
CONTRAST
SHARPNESS
SATURATION
DNR
MIRROR
BACK
EXIT
SAVE & EXIT

5
5
5
5
5
OFF



Figure 3-6 VIDEO SETTINGS
WHITE BALANCE
White alae, the hite editio futio of the
aea, is to adjust the olo tepeatue aodig to
the eioet. It a eoe uealisti olo asts i
the iage. You a set the ode as AUTO, o MANUAL.
AUTO
Ude AUTO ode, hite alae is eig adjusted
autoatiall aodig to the olo tepeatue of the
see illuiatio.
MANUAL
You a set the R GAIN/B GAIN alue fo  to  to
adjust the shades of ed/lue olo of the iage.
WHITE BALANCE
MODE
R-GAIN
B-GAIN
BACK
EXIT
SAVE & EXIT
MANUAL
5
5



Figure 3-7 MANUAL MODE
BRIGHTNESS
Bightess efes to the ightess of the iage.
You a set the ightess alue fo  to  to dake
o ighte the iage. The highe the alue is, the
ighte the iage is.
CONTRAST
This featue ehaes the diffeee i olo ad light
etee pats of a iage. You a set the CONTRAST
alue fo  to .
SHARPNESS
Shapess deteies the aout of detail a iagig
sste a epodue. You a set the SHARPNESS
alue fo  to .
SATURATION
Adjust this featue to hage the satuatio of the olo.
The alue ages fo  to .

DNR (Digital Noise Reduction)
The DNR futio a deease the oise effet,
espeiall he aptuig oig iages i poo light
oditios ad delieig oe auate ad shap
iage. You a set the DNR alue fo  to .
MIRROR
OFF, H, V, ad HV ae seletale fo io.
OFF: The io futio is disaled.
H: The iage flips ° hoizotall.
V: The iage flips ° etiall.
HV: The iage flips ° oth hoizotall ad
etiall.
3.5 FACTORY DEFAULT
Moe the uso to FACTORY DEFAULT ad lik Iris+ to
eset all the settigs to the fato default.
3.6 EXIT
Moe the uso to EXIT ad lik Iris+ to eit the eu
ithout saig.
3.7 SAVE & EXIT
Moe the uso to SAVE & EXIT ad lik Iris+ to sae
the settigs, ad eit the eu.
UD040B