HIK VISION HS-AFS-H100I Series User manual

User Manual
HS-AFS-H100I Series NAS
Download App

1
User Manual
COPYRIGHT ©2017 WUHAN HIKSTORAGE TECHNOLOGY CO.,LTD.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the
properties of WUHAN HIKSTORAGE TECHNOLOGY CO.,LTD. This user manual (hereinafter
referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed,
partially or wholly, by any means, without the prior written permission of our company.
Unless otherwise stipulated, our company do not make any warranties, guarantees or
representations, express or implied, regarding to the Manual.
About this Manual
This Manual is applicable to HS-AFS-H100I Series NAS.
The Manual includes instructions for using and managing the product. Pictures, charts,
images and all other information hereinafter are for description and explanation only.
The information contained in the Manual is subject to change, without notice, due to
firmware updates or other reasons.
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
Our company’s trademarks and logos are the properties of our company in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their
respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED,
WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL
FAULTS AND ERRORS, AND OUR COMPANY MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,
FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN
NO EVENT WILL OUR COMPANY, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS
BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION
WITH THE USE OF THIS PRODUCT, EVEN IF OUR COMPANY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE
WHOLLY AT YOUR OWN RISKS. OUR COMPANY SHALL NOT TAKE ANY RESPONSIBILITES
FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM
CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY
RISKS; HOWEVER, OUR COMPANY WILL PROVIDE TIMELY TECHNICAL SUPPORT IF
REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN
YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR
USE CONFORMS THE APPLICABLE LAW. OUR COMPANY SHALL NOT BE LIABLE IN THE
EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW,
THE LATER PREVAILS.

2
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm
between the radiator and your body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with
"CE" and comply therefore with the applicable harmonized European standards
listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU, .
Hereby, our company declare that the radio equipment type [W100 Series Mobile NAS]
is in compliance with Directive 2014/53/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points. For
more information see: www.recyclethis.info
2006/66/EC and its amendment¬ 2013/56/EU (battery directive): This product
contains a battery that cannot be disposed of as unsorted municipal waste in the
European Union. See the product documentation for specific battery
information. The battery is marked with this symbol, which may include lettering
to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the
battery to your supplier or to a designated collection point. For more information see:
www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.

3
This device complies with Industry Canada licence-exempt RSS standard(s). Operaon is
subject to the following two condions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operaon of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploitaon est autorisée aux deux condions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'ulisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est suscepble d'en compromere le fonconnement.
Under Industry Canada regulaons, this radio transmier may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmier by Industry
Canada. To reduce potenal radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that necessary for successful communicaon.
Conformément à la réglementaon d'Industrie Canada, le présent émeeur radio peut
fonconner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé
pour l'émeeur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intenon des autres ulisateurs, il faut choisir le type d'antenne et
son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse
pas l'intensité nécessaire à l'établissement d'une communicaon sasfaisante.
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre
le radiateur et votre corps

4
The user manual for local area network devices shall contain instrucons
related to the restricons menoned in the above secons, namely that:
(i) the device for operaon in the band 5150-5250 MHz is only for indoor use to
reduce the potenal for harmful interference to co-channel mobile satellite
systems;
(ii) the maximum antenna gain permited for devices in the band 5725-5850
MHz shall comply with the e.i.r.p. limits specified for point-to-point and non
point-to-point operaon as appropriate.
(i)Les disposifs fonconnant dans la bande 5150-5250 MHz sont réservés
uniquement pour une ulisaon à l'intérieur afin de réduire les risques de
brouillage préjudiciable aux systèmes de satellites mobiles ulisant les mêmes
canaux.
(ii) le gain d'antenne maximal autorisé pour les appareils dans la bande
5725-5850 MHz doivent respecter le pire limites spécifiées pour le
point-à-point et l'exploitaon non point à point, le cas échéant.
Users should also be advised that high-power radars are allocated as primary
users (i.e. priority users) of the bands 5725-5850 MHz and
that these radars could cause interference and/or damage to LE-LAN devices.
Les ulisateurs de radars de haute puissance sont désignés ulisateurs
principaux (c.-à-d., qu'ils ont la priorité) pour les bandes
5725-5850 MHz et que ces radars pourraient causer du brouillage et/ou des
dommages aux disposifs LAN-EL.

5
Packing List
A
HS-AFS-H100I × 1Network Cable 1m × 1
HDD (Oponal) × 1Screwdriver × 1
Screw × 8
*8

6
Data Cable 1m × 1OTG Cable 15cm × 1
User Manual × 1Power Adapter ×1
User Manual
Note:
• The data cable is used to connect computer or smart television.
• The OTG cable is used to connect USB flash drive or mobile HDD.

7
Installation
B
②

8
④

9
2.5”
1
⑥

10
⑧

11
Connecon for Wired Network
12
LAN
WAN
12

12
Connecon for Wireless Network
(HiStor app is required.)
LAN
WiFi
WAN

13
App Connection
C
Scan QR Code to Add Device
Follow the steps to create connecon between H100I and your mobile
phone.
Step 1 Download HikStor app by one of the following opons.
• Scan QR code in the cover of the user manual.
• Download HiStor app in app store.
Step 2 Run HiStor app.
Step 3 Use the Scan QR Code funcon of HiStor to scan the QR code printed
at the boom of H100I.
Step 4 Follow the instrucons to connect H100I.
UD06776B