HIK VISION DS-3E1X05P Series User manual

100 Mbps PoE Switch
Quick Start Guide

Legal Informaon
©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product. Pictures, charts, images and
all other informaon hereinaer are for descripon and explanaon only. The informaon
contained in the Manual is subject to change, without noce, due to rmware updates or other
reasons. Please nd the latest version of this Manual at the Hikvision website ( hps://
www.hikvision.com/ ).
Please use this Manual with the guidance and assistance of professionals trained in supporng the
Product.
Trademarks
and other Hikvision's trademarks and logos are the properes of
Hikvision in various jurisdicons.
Other trademarks and logos menoned are the properes of their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH
ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR
PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION
BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS,
AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
100 Mbps PoE Switch Quick Start Guide
i

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
100 Mbps PoE Switch Quick Start Guide
ii

Regulatory Informaon
FCC Informaon
Please take aenon that changes or modicaon not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protecon against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instrucon manual, may cause harmful
interference to radio communicaons. Operaon of this equipment in a residenal area is likely to
cause harmful interference in which case the user will be required to correct the interference at his
own expense.
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two
condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operaon.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable
harmonized European standards listed under the EMC Direcve 2014/
30/EU, the RoHS Direcve 2011/65/EU.
2012/19/EU (WEEE direcve): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the European
Union. For proper recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collecon points. For more informaon see: hp://
www.recyclethis.info .
2006/66/EC (baery direcve): This product contains a baery that
cannot be disposed of as unsorted municipal waste in the European
Union. See the product documentaon for specic baery
informaon. The baery is marked with this symbol, which may
include leering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).
For proper recycling, return the baery to your supplier or to a
100 Mbps PoE Switch Quick Start Guide
iii

designated collecon point. For more informaon see: hp://
www.recyclethis.info .
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
100 Mbps PoE Switch Quick Start Guide
iv

Preface
Applicable Models
This manual is applicable to DS-3E1XXXP series switches.
Symbol Convenons
The symbols that may be found in this document are dened as follows.
Symbol Descripon
Danger
Indicates a hazardous situaon which, if not avoided, will or could
result in death or serious injury.
Cauon
Indicates a potenally hazardous situaon which, if not avoided, could
result in equipment damage, data loss, performance degradaon, or
unexpected results.
Note Provides addional informaon to emphasize or supplement
important points of the main text.
Safety Instrucon
Danger
• This is a class A product and may cause radio interference in which case the user may be
required to take adequate measures.
• Ensure that your devices powered via the PoE port have their shells protected and re-proofed,
because the switches are not compliant with the Limited Power Source (LPS) standard.
• In the use of the product, you must be in strict compliance with the electrical safety regulaons
of the naon and region.
• The socket-outlet shall be installed near the device and shall be easily accessible.
• The device must be connected to an earthed mains socket-outlet.
• Install the device according to the instrucons in this manual.
• indicates hazardous live and the external wiring connected to the terminals requires
installaon by an instructed person.
• Keep body parts away from fan blades. Disconnect the power source during servicing.
• Never place the device in an unstable locaon. The device may fall, causing serious personal
injury or death.
• This device is not suitable for use in locaons where children are likely to be present.
100 Mbps PoE Switch Quick Start Guide
v

• CAUTION: Risk of explosion if the baery is replaced by an incorrect type.
• Improper replacement of the baery with an incorrect type may defeat a safeguard (for
example, in the case of some lithium baery types).
• Do not dispose of the baery into re or a hot oven, or mechanically crush or cut the baery,
which may result in an explosion.
• Do not leave the baery in an extremely high temperature surrounding environment, which may
result in an explosion or the leakage of ammable liquid or gas.
• Do not subject the baery to extremely low air pressure, which may result in an explosion or the
leakage of ammable liquid or gas. Dispose of used baeries according to the instrucons.
Cauon
• CAUTION: Double pole/Neutral fusing. Aer operaon of the fuse, parts of the device that
remain energized might represent a hazard during servicing.
• The device has been designed, when required, modied for connecon to an IT power
distribuon system.
• This device is suitable for mounng on concrete or other non-combusble surface only.
• The venlaon should not be impeded by covering the venlaon openings with items, such as
newspapers, table-cloths, curtains, etc. The openings shall never be blocked by placing the
device on a bed, sofa, rug or other similar surface.
• No naked ame sources, such as lighted candles, should be placed on the device.
• The device shall not be exposed to dripping or splashing and that no objects lled with liquids,
such as vases, shall be placed on the device.
• Burned ngers when handling the cover area of the device. Wait one-half hour aer switching
o before handling the parts.
• CLASS 1 LASER PRODUCT
100 Mbps PoE Switch Quick Start Guide
vi

Chapter 1 Introducon
1.1 Product Introducon
DS-3E1XXXP series switches (hereinaer referred to as "the device") are layer 2 PoE switches,
providing advanced PoE power supply technology on the basis of high-performance access. The
switches support client management, network topology management, link aggregaon, port
management and so on. The switches are suitable for small-scale LAN device access.
1.2 Packing List
DS-3E1X05/09P Series DS-3E1318/26P Series
Switch × 1 × 1
Power Adapter × 1 -
AC Power Cord × 1 × 1
Screw - × 4
L-Shaped Bracket - × 2
Quick Start Guide × 1 × 1
1.3 Appearance
Dierent models of devices may have dierent appearances. The following pictures are only for
illustraon.
Front Panel
Figure 1-1 DS-3E1105P Series
100 Mbps PoE Switch Quick Start Guide
1

Note
The front panel of DS-3E1309P switch is similar to that of DS-3E1105P, with dierences on 8
100Mbps PoE RJ45 ports, and that No.9 port is gigabit RJ45 port.
Figure 1-2 DS-3E1318P Series
Note
The front panel of DS-3E1326P switch is similar to that of DS-3E1318P, with dierences on 24
100Mbps PoE RJ45 ports, 24 LINK/ACT, and 24 PoE indicators.
Rear Panel
Figure 1-3 DS-3E1X05/09P Series
Figure 1-4 DS-3E1318/26P Series
100 Mbps PoE Switch Quick Start Guide
2

Port/Indicator Descripon
Indicator/Port Descripon
PoE-MAX Indicator • Solid /Flashing: The output power of the switch will reach the
upper limit. The power supply may be abnormal if more devices
are connected.
• Unlit: The switch provides power supply to PD normally.
PWR Indicator • Solid: The switch is powered on normally.
• Unlit: No power supply connected or power supply is abnormal.
LINK/ACT Indicator • Solid: The port is connected.
• Flashing: The port is transming data.
• Unlit: The port is disconnected or connecon is abnormal.
PoE Indicator • Solid: The switch provides power supply to PD normally.
• Unlit: The switch is disconnected to PD, or provides power supply
to PD abnormally.
G1/G2 Port Indicator • Solid: The gigabit SFP ber opcal port is connected.
• Flashing: The gigabit SFP ber opcal port is transming data.
• Unlit: No gigabit SFP ber opcal port connected or connecon is
abnormal.
100Mbps PoE RJ45 Port Used for PD devices connecon via network cables.
100Mbps RJ45 Port Used for other devices connecon via network cables.
Gigabit Combo • When connected to a network cable, the combo is a RJ45 port.
When plugged into with an opcal module and connected to an
opcal ber, the combo funcons as a ber opc port.
• When connected to both the network cable and opcal ber at
the same me, the port works as a ber opc port.
Grounding Terminal Used for connecng to the grounding cable to protect the switch
from lightning.
Power Supply Use the aached power cord to connect the switch to socket.
100 Mbps PoE Switch Quick Start Guide
3

Chapter 2 Installaon
Please select the appropriate installaon method according to the actual needs.
Before You Start
• Ensure that the desktop or rack is stable and rm enough.
• Keep the room well-venlated. Keep at least 10 cm distance around the device for heat
dissipaon.
• Keep at least 1.5 cm vercal distance between two adjacent devices for rack-mount installaon.
2.1 Desk-Mounted Installaon
Place the device on the desk.
2.2 Wall-Mounted Installaon
Steps
1. Check the distance between the two hanging holes on the rear cover of the device.
2. Insert two M4 screws into the wall.
Note
• Please prepare two M4 screws.
• Ensure that the distance between the two screws equals that between the two hanging holes.
• Set aside at least 4 mm screws outside the wall.
3. Align the hanging holes with screws, and hang the device on the screws.
Figure 2-1 Wall-Mounted Installaon
100 Mbps PoE Switch Quick Start Guide
4

2.3 Rack-Mounted Installaon
Steps
1. Check the grounding and stability of the rack.
2. Use the aached screws to x the two L-shaped brackets to the sides of the switch.
Figure 2-2 Fix L-Shaped Brackets
3. Place your switch on the rack, x it to the rack with self-prepared screws to stably install your
switch.
Figure 2-3 Fix to the Rack
100 Mbps PoE Switch Quick Start Guide
5

Chapter 3 Grounding
3.1 Connecng the Grounding Cable
Grounding is used to quickly release overvoltage and overcurrent induced by lightening for switch,
and to protect personal safety. Select the appropriate grounding method according to your needs.
3.1.1 With Grounding Bar
If a grounding bar is available at the installaon site, follow the steps below.
Steps
1. Connect one end of the grounding cable to the binding post on the grounding bar.
2. Connect the other end of the grounding cable to the grounding terminal of the device and x
the screw.
Figure 3-1 Grounding with Grounding Bar
3.1.2 Without Grounding Bar
If there is no grounding bar but the earth is nearby and the grounding body is allowed to be
buried, follow the steps below.
Steps
1. Bury an angle steel or steel pipe (≥ 0.5 m) into the mud land.
2. Weld one end of the grounding cable to the angle steel or steel pipe and embalm the welding
point via electroplang or coang.
3. Connect the other end of the grounding cable to the grounding terminal.
100 Mbps PoE Switch Quick Start Guide
6

Figure 3-2 Grounding with Angle Steel
3.2 Connecng RJ45 Port
Use a network cable to connect the device to the RJ45 port of a peer device such as network
camera, NVR, switch, etc.
Figure 3-3 RJ45 Port Connecon
100 Mbps PoE Switch Quick Start Guide
7

3.3 Connecng SFP Opcal Module
Connecng SFP opcal module is supported when the device has a ber opc port or a combo.
When connected to a network cable, the combo is a RJ45 port. When plugged into with an opcal
module and connected to an opcal ber, the combo funcons as a ber opc port.
When connected to both the network cable and opcal ber at the same me, the port works as a
ber opc port.
Steps
Cauon
• Single-Mode opcal module needs to be paired.
• Do not bend ber opc (curvature radius ≥ 10 cm) overly.
• Do not look directly at ber opc connector because the laser is harmful to eyes.
1. Connect the two paired SFP opcal modules with an opcal ber.
2. Hold the SFP opcal module from one side, and smoothly plug it into the device along with the
SFP port slot unl the opcal module and the device are closely aached.
3. Aer powering on the device, check the status of LINK/ACT indicator. If the indicator is lit, the
link is connected. If the indicator is unlit, the link is disconnected. Check the line, and make sure
peer devices have been started.
100 Mbps PoE Switch Quick Start Guide
8

Chapter 4 Powering on the Device
Please use the aached power cord in package to power on the device.
Before powering your switch, make sure that:
• The operang power supply is compliant with rated input standard.
• Port cables and grounding cables are correctly connected.
• If there is outdoor cabling, connect a lightning rod and lightening arrester to the cable.
Cauon
PoE power supply line and strong wire cannot be wired together, otherwise PD equipment or
switch ports will be burnt.
100 Mbps PoE Switch Quick Start Guide
9

Chapter 5 Device Management
The device can be congured and managed through iVMS-4200 soware, mainly including network
parameter conguraon, port conguraon, link aggregaon conguraon, network topology
display and so on.
Note
• This chapter will briey introduce the device management through iVMS-4200 soware. For
other funcons, please refer to User Manual of iVMS-4200 Soware.
• All pictures in this manual are for illustraon only, and the specic interface is subject to the
actual interface.
5.1 Acvang Devices
For the inacve devices, you are required to create a password to acvate them before they can be
added to the soware and work properly.
Before You Start
Make sure the device to be acvated is connected to the network and is in the same subnet with
the PC running the client.
Steps
Note
This funcon should be supported by the device.
1. Enter the Device Management page.
2. Click Device tab on the top of the right panel.
3. Click Online Device to show the online device area at the boom of the page.
The searched online devices are displayed in the list.
4. Check the device status (shown on Security Level column) and select an inacve device.
Figure 5-1 Online Inacve Device
5. Click Acvate to open the Acvaon dialog.
6. Create a password in the password eld, and conrm the password.
100 Mbps PoE Switch Quick Start Guide
10

Cauon
The password strength of the device can be automacally checked. We highly recommend you
change the password of your own choosing (using a minimum of 8 characters, including at least
three kinds of following categories: upper case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the password monthly
or weekly can beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
7. Click OK to acvate the device.
5.2 Adding Devices
The client provides various device adding modes including IP/domain, IP segment, cloud P2P, ISUP
protocol, and HiDDNS. The client also supports imporng mulple devices in a batch when there
are large amount of devices to be added. The secon only introduces one mode, namely, adding a
detected online device.
Steps
1. Enter the Device Management module.
2. Click Device tab on the top of the right panel.
3. Click Online Device to show the online device area.
The searched online devices are displayed in the list.
4. Select an online device in the Online Device area, and click Add to open the device adding
window.
Note
For the inacve device, you need to create the password for it before you can add the device
properly. For detailed steps, refer to Acvang Devices .
5. Enter the required informaon.
Name
Enter a descripve name for the device.
IP Address
Enter the device's IP address. The IP address of the device is obtained automacally in this
adding mode.
Port
You can customize the port number. The port number of the device is obtained automacally
in this adding mode.
User Name
100 Mbps PoE Switch Quick Start Guide
11

By default, the user name is admin.
Password
Enter the device password.
Cauon
The password strength of the device can be automacally checked. We highly recommend
you change the password of your own choosing (using a minimum of 8 characters, including
at least three kinds of following categories: upper case leers, lower case leers, numbers,
and special characters) in order to increase the security of your product. And we recommend
you change your password regularly, especially in the high security system, changing the
password monthly or weekly can beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
6. Check Synchronize Time to synchronize the device me with the PC running the client aer
adding the device to the client.
7. Click Add.
100 Mbps PoE Switch Quick Start Guide
12

Chapter 6 Get More Informaon
iVMS-4200 Management
Scan the QR code below for iVMS-4200 soware operaons.
Hik-ProConnect Management
Go to hp://hik-proconnect.com or scan the QR code below for Hik-ProConnect operaons.
Hik-ProConnect for Installers Hik-Connect for Users
100 Mbps PoE Switch Quick Start Guide
13