HIK VISION MinMoe DS-K1T671TM-3XF Instruction sheet

Temperature Screening MinMoe Configuration

CONTENTS
Introduction
Preparation
Installation
Configuration
Operation
Q&A

Introduction -> System Structure
Access control and temperature event can be managed by monitoring tablet, iVMS-4200 or HikCentral Professional.

DS-K1T671TM-3XF
Introduction -> Device Parameters
50,000 face capacity
50,000 M1 card capacity
100,000 event capacity
Temperature
measurement
Sensor
Vanadium Oxide uncooled sensor
Resolution
120
×160
Frame rate
25 fps
Temperature range
30
°C to 45 °C
Temperature accuracy
±
0.5 °C, without black body calibration
Measuring distance
0.3 to 2.0 m
Other
Working voltage
12 VDC/2 A
Working temperature
0
°C to 50 °C
For temperature measurement: 10
°C to 35 °C
Working humidity
10 to 90% (No condensing)
Application
Indoor
Application environment
Indoor and windless environment use only

DS-K5604A-3XF/V DS-K1T671TM-3XF
LCD screen 10.1 inch 7 inch
Face capacity 50,000 50,000
Card capacity N/A 50,000 M1 cards
Thermal imaging resolution 120 x 160 120 x 160
Temperature range and
accuracy 30-45°C (±0.5 °C) 30-45°C (±0.5 °C)
Authentication Distance 0.3-2m 0.3-2m
Mask detection Support Support
Fast temperature
measurement Support Support
Deployment Plug & play, floor standing
Including power adaptor Wall mounting/ floor standing with mounting pole
Plug
&
play
Introduction -> Device Parameters

DS-KAB671-B (Optional)
Introduction -> Device Parameters
Material
SPCC
Weight
6.7
kg (14.8 lb.)
Dimension (W x H x D)
98.5 mm
×1342 mm ×225 mm (3.9" ×52.8" ×8.9")

DS-DM0710BL base bracket (Optional)
Introduction -> Device Parameters
Material
SPCC
Weight
6.7
kg (14.8 lb.)
Dimension (W x H x D)
193 mm
×353.5 mm ×195.5mm (7.6'' ×14.3'' ×7.7'')
Net Weight
2.2
±0.5 Kg (4.85 ±1.1 lb)
Gross Weight
2.5
±0.5 Kg (5.51 ±1.1 lb)

DS-KC001 monitoring tablet (Optional)
Introduction -> Device Parameters
Screen
7
-inch Touch-Screen
Display resolution
1024 * 600
Records quantity
100,000
Dimension (W x H x D)
200 mm
×140 mm ×15.5 mm (7.87" ×5.51" ×0.61")
Weight
419.3 g (without package)

CONTENTS
Introduction
Preparation
Installation
Configuration
Operation
Q&A

Preparation -> Site Selection
1. Indoor and windless environment use only. Indoor environment
temperature must be 10 ~ 35℃. If beyond this range, the temperature
measurement accuracy of the device cannot be guaranteed.
2. The device should be at least 2 meters away from the light, and at least
3 meters away from the window.
3. Make sure the environment illumination is more than 100 Lux. (Similar
with 10W LED lamp)
4. Suggest installation height is 1.4 m.
5. LAN cable available. Terminal doesn’t support WiFi.
6. Power source available.

Preparation -> Unbox Terminal
Bracket
Accessories
Quick Start Guide Quick User Manual
Thermal MinMoe Terminal

Preparation -> Unbox Floor Stand Pole
Package
Pole and accessories

Preparation -> Accessories and Tools
1. Qualified power adapter - 12V DC, 2A.
2. LAN Cable.
3. Gang box (optional).
Accessories for each terminal
Screwdriver set (Compulsory), wire stripper, impact drill, etc.
Tools

CONTENTS
Introduction
Preparation
Installation
Configuration
Operation
Q&A

Installation -> Terminal Wire Connection
1. GND is the common interface
for RS-485, exit button, and
door contact sensor.
2. If exit reader, touchless exit
button, security unit, or lock is
used, need to arrange a power
adapter which can give
enough power output for all of
the devices.
3. Please ensure that the
equipment is powered off
during the installation and
wiring.

Installation -> Wall Mounting
1. Drill holes on the wall and install gang box.
2. Secure the mounting plate on the gang box and wall.
3. Route the cables through the cable hole of the
mounting plate, and connect to the corresponding
external devices.
4. Align the device with the mounting plate and hang
the terminal on the mounting plate.
5. Use screwdriver to secure terminal on mounting plate.

Installation -> Pole Mounting
1. Unscrew the two screws on the side of the bottom cover and
remove bottom cover.
2. Install the expansion screws in the package into the holes at
bottom. Make sure the expansion screw is slightly above the
ground and secure it with nut.
3. Connect cables inside pole.
4. Move back the bottom cover and screw back the two screws
on the side.
Install floor stand pole
Install terminal on the pole
1. Connect wires of terminal.
2. Fix terminal on the pole.

CONTENTS
Introduction
Preparation
Installation
Configuration
Operation
Q&A

Configuration -> Basic Settings
1. Activate device.
2. Press on the screen for 3 seconds to input password
and enter local menu.
3. Set IP address.
4. Check device firmware version. Make sure it is the
latest version.
http://www.hikvisioneurope.com/uk/portal/?dir=portal/Product
%20Firmware/00%20Temperature%20Screening/Temperature%
20MinMoe%20%28DS-K1T671TM-3XF%26DS-K5604A-
3XF_V%29/firmware

MinMoe terminal firmware
Thermal module firmware
MCU extension module*
Configuration -> Firmware explained
*normally no need to upgrade
UK PORTAL