HILLENBRAND INDUSTRY Hill-Rom Air-Shields RW82 User manual

Hili-Rom Air-Shields.
AHILLENBRAND INDUSTRY
INSTRUCTIONS REASON FOR CHANGE
INSERT THIS SHEET INTO THE MANUAL LOW PRESSURE GAS MODULE
DESCRIBED BELOW.
EQUIPMENT: Resuscitaire Radiant Warmer, Model RW82
MANUAL TITLE: Service Manual
MANUAL CAT. NO.: 82 990 07
ADDENDUM INFORMATION
MAKE THE FOLLOWING CHANGES WHEN A LOW PRESSURE GAS MODULE IS PRESENT IN THE
RESUSCITAIRE RADIANT WARMER:
TABLE 3.1A SPECIFICATIONS Page 3-3:
Change cylinder pressure from 2900 psi max (199.8 bar) to 3000 psi max (207 bar)
TABLE 3.1b SPECIFICATIONS Page 3-5:
Change cylinder pressure from 199.8 bar to 207 bar.
SECTION 3 RESERVE GAS SUPPLY PAGE 3-18. ADD THE FOWLING STATEMENT:
The regulator for United Kingdom and Canadian units is preset to 45 psi when the cylinder pressure is 1500
psi.
TABLE 6.10 RESUSCITAIRE RADIANT WARMER О PIPELINE (DISS/NIST) WITH O2 CYLINDER (PIN-
INDEX) GAS SUPPLY ASSEMBLY, PARTS LIST ADDS THE FOLLOWING:
Gas Supply, Oz Pipeline (NIST) O2 with Cylinder (Pin-Index) Low Pressure - Part Number 81501 94.
Add to Item 23 regulator, 45 psi W/press relief - Part number 81 501 77.
TABLE 6.12 RESUSCITAIRE RADIANT WARMER OyAIR PIPELINE (DISS/NIST) WITH Oy/AIR CYL-
INDER (PIN-INDEX) GAS SUPPLY ASSEMBLY, PARTS LIST ADDS THE FOLLOWING:
Gas Supply, Oo/Air Pipeline (NiST) with Cylinder (Pin-Index) Low Pressure - Part Number 81 501 95.
Add to Item 23 regulator, 45 psi W/press relief ~ Part number 81 501 77.
Cat. No. 82 990 07 - 7A3 Page 1 of 1 Printed in U.S.A., 9/00

Hill-Rom
Air-shields,
A HILLENBRAND INDUSTRY
INSTRUCTIONS REASON FOR CHANGE
INSERT
THIS
SHEET
INTO
THE
MANUAL
SERVICE
INSTRUCTIONS
GAS
DELIV-
DESCRIBED
BELOW.
ERY
MODULE
EQUIPMENT: Resuscitaire© Radiant Warmer
MANUAL TITLE: Service Manual
MANUAL CAT. NO.: 82 990 07 - 7 (man221ra)
ADDENDUM INFORMATION
SPECIFICATIONS
Resuscitation wall suppiypressure........................, 2.8 bar (40 psi) to 5.2 bar (75 psi)
Resuscitation cylinder pressure .......... ann 199.8 bar (2900 psi) maximum
Resuscitation suction circuit adjustable .
suction intensity ..................... 0 eee 0 mm hg 0' Ha O to 150 Hg (80” Ha O)
Resuscitation Primary Outlet supply pressure limit ....... 1... 15.7 kPa (160 cm H20) -/+ 20%
Resuscitation Primary Outlet flow range ...................,.,... rr Oto 15 Ipm
Resuscitation Auxiliary Outletpressurelimit................... 16 kPa (160 cm H20) -/+ 10%
Resuscitation Auxiliary Outlettlowrange ...................................... 0 to 15 ipm
PNEUMATIC SCHEMATIC
The Pneumatic Schematic for the Gas Delivery Module is attached.
Cat. No. 82 990 07 - 7A2 Page 1 of 2 Printed in USA 3/01

THEORY OF OPERATION
GAS
SUPPLY
BLENDER
RESUSCITATION
BREATHING
MODULE
MODULE
MODULE
CIRCUIT
w/out
Oz
Pipeline
Autobreath
Manual
02
Pipeline
with
and
Reserve
|
Autobreath
Manual/Auto
—
Precision
Blender
ir
Pineli
|
;
Manual
with
|
Del
-一
-~
上
O2/Air
Pipeline
Gas
Delivery
integral
pop-off
O2
/Air
Pipeline
and Reserve
FUNCTIONAL BLOCK DIAGRAM
When the blender module is included in the system, the Gas delivery Module provides 0 to 15 Ipm of
Op/Air mixture as selected by the user. when no blender module is included in the system, the Gas Deliv-
ery Module provides 0 to 15 pm of Og as selected by the user. The flow control is calibrated dial type
flow adjustment.

3INDION
AYIANMZO
SVO
‘OLIVINSHOS
OLLWWNSNd
“OOM
SNSIU
40
1404
ON338
HIV/ZO
OL
oon
sns3
40
331-103
3015
NOUS
JEM
VIVAS
103AN00
VIONIÃS
0/4
MBISAS
E
+
IN
NLSAS
る
SW31SAS
TL
TEINTVEESNOS
ASSIS
。
aaON318
Y
3AvH
TIVES
33DOOm
1ddnS
SY9
UIV/ZO
411no819
Adons
sv9
BIVIZO
ZAVH
VIVAS
3ON319
Y
"33ON318
30
Шу
01
419916.
S¥9
мг
1404314
00"
[
gd
хин
819720
1
1 1 I
1 1 ㅣ
0000
+
i
1 1
i
Et
зади
20
νο
41 06
C3YNOi1d0)
31ngon
MBON319
EN
,
003
091
JAVAOIY
AVAL
ad
Bona
3anss3ud
RAGNI
MAD
20
BBÍVANO,
SI
gd43HDIHN
ONÍS
TE
>
+80
$3
JO
LC.
indi
dt
=
di
ο
MOTÁ
zo
7
Dna
OSL
ABvITIXNY
salao
一
Noi12HS
ud]
gt<
9
ÖL
asi“
OL
0
NOI
LONS
39009
NOVA
ZA
SAT
354
9058
00
134
0925
o
isa ss
ru
manine
15d
9067
zo
wu
Miva
PALA
30009
qunssaua,
3391145
20
PET
v5
ㅣ
ASIN
"55106
190
0021
8
153
59
09JNG3
KØL
INS
23139
5)
USADO
HR
ki
AE
AOS
¿oro
Wea
doce
do SI
do
+
Adans_
NIwm
m
0
edi
si
alo
ZLE
の
9HINDO
4012
on
ore
HE
1
:
Sa,
ェ
ーー
ニ
ーー
ニー
一
-+
Z
Tino
i
(isa
84-04)
dans
E
“ap
bd
Gagra2
o
Var
univ
TIA
Shan
051-
O1
à
n
1
ASIN
"SSI
4831114

Hill- Rom, sir-shields
A HILLENBRAND INDUSTRY
————— INSTRUCTIONS — REASON FOR CHANGE |————
INSERT THIS SHEET INTO THE MANUAL ADD REFERENCES FOR
DESCRIBED BELOW. RESUSCITATION CALIBRATION
EQUIPMENT: Resuscitaire Radiant Warmer Model RW82
MANUAL TITLE: Service Manual
MANUAL CAT. NO.: 82 990 07 -7
ADDENDUM INFORMATION
SECTION 3 PAGE 3-18 RESUSCITATION MODULE. ADD THE FOLLOWING TO THE CAUTION:
Refer to paragraph 5.12 on page 5-44.
SECTION 5 PAGE 5-2. PARAGRAPH 5.2.2 RESUSCITATION CALIBRATION.
Change to read as follows:
Refer to paragraph 5.12 on page 5-44.
Cat. No. 82 990 07 -7A1 Page 1 of 1 Printed in USA 3/00

PLEASE READ
Please check the A page for change information.
Since Hill-Rom Air-Shields, Inc. conducts a continuous product improvement program, circuit
and component improvements are sometimes Incorporated into equipment before they can be
incorporated into the printed manuals. When this occurs, changed material is provided on
separate sheets at the rear of the manual or under separate cover in the form of a change
package. Changed material on each page of text is indicated by a vertical bar in the margin next
to the changed material, as shown on the right.
THIS MANUAL CONTAINS PROPRIETARY INFORMATION, REPAIRS AND AUTHORIZED
MODIFICATIONS SHOULD BE PERFORMED ONLY BY QUALIFIED SERVICE PERSONNEL
TO MAINTAIN YOUR WARRANTY AND TO AVOID CREATING SAFETY HAZARDS. WE
CANNOT ASSUME RESPONSIBILITY FOR ANY CONDITIONS AFFECTING THE PROPER
OPERATION OF THIS EQUIPMENT WHICH MAY RESULT FROM UNAUTHORIZED REPAIR
OR MODIFICATION.
NOTE ON REPLACEMENT PARTS
Some parts used in your equipment may be different than those which appear in the Parts List of
this manual. This sometimes occurs due to difficulty in parts procurement, but does not alter the
function of the equipment. Order the part listed in the Parts List. Refer to Section 6 of this Manual
for a listing of recommended spare parts.
NOTE: ALSO SEE PAGE 2.
Change 3 1

LIST OF AVAILABLE MODIFICATION KITS
ITEM DESCRIPTION AND PURPOSE PART NO.
01
RETROFIT KIT, COLUMN WITH
PNEUMATICS (NO AUTOBREATH,
BLENDER, NIST GAS FITTINGS)
81 900 15

LIST OF EFFECTIVE PAGES
PAGE NO. CHANGE NO. DATE OF ISSUE
Front Cover ................,.,..........,, 6............... NPR 12/99
5-4 thru 5-17 eee 0 10/96
5-18 and 5-19 ...................,........ 和 9/99
5-20 thru 5-27 ............................ Ο ii ον ώ κών εν 10/96
5-28 enkkee 1 8/97
BR rr rr 0 10/96
5-80 .......................,,,..,,,,,,,. Θ ενω νεο ν ον ενω εκ κκ εκ κενο κενο σεν κ ων 6/98
5-31........ centrar rena DO n 10/96
5-32 rr 2 6/98
5-33 ....... elena | eee 기 다 8/97
5-34 thru 5-52 ..,,...,.,.................. 0 10/96
6-1 апа 6-2 .............. ее нннна» Z κκ ως 6/98
6-3 and 6-4 .............................. 0 10/96
6-5 의 이 기 이 기 B aro 10/98
6-6 and6-7....................,.,,,.,. 2 6/98
Change 6 A

LIST OF EFFECTIVE PAGES (continued)
PAGE NO. CHANGE NO. DATE OF ISSUE
人
6-20 thru 6-22
6-23
thru 6-36
6-37 and 6-38
B Change 5

LIST OF DEFINITIONS AND SYMBOLS
TECHNICAL DEFINITIONS
RESUSCITATOR. A portable device used in emergency situations to provide assisted ventilation to individu-
als whose respiration is inadequate. The Resuscitation Module used in the Resuscitaire® Radiant Warmer
contains pneumatic circuitry necessary for infant resuscitation.
PNEUMATICS. Dealing with the properties of air and other gases. The following pneumatic circuits are con-
tained in the optional Resuscitation Module: a suction circuit, a patient Oxygen delivery circuit and an auxiliary
Oxygen delivery circuit.
BLENDER. A device which provides a a specific mixture of Air and Oxygen. The Blender Module is an option
that can be used in the Resuscitaire® Radiant Warmer. The Blender Module provides an Oz Concentration
from 21 to 100% through the Patient Outlet.
OFF-LINE DIAGNOSTIC. A series of 18 tests, embedded in the internal software of the Controller, which
enable the user to test the operation of the Resuscitaire® Radiant Warmer when the equipment is not in
the Operating Mode.
NOTE, IMPORTANT, CAUTION AND WARNING
NOTE: A NOTE is inserted in text to point out procedures or conditions which may otherwise be misinter-
preted or overlooked. A NOTE may also be used to clarify apparently contradictory or confusing
Situations,
IMPORTANT: Similar to a NOTE but used where greater emphasis is required.
CAUTION: A CAUTION is inserted in text to call attention to a procedure which, if not followed ex-
actly, can lead to damage or destruction of the equipment.
WARNING: A WARNING is inserted in text to call attention to dangerous or hazardous conditions
inherent to the operation, cleaning, and maintenance of the equipment which may result in per-
sonal injury or death of the operator or patient.

SYMBOLS
Attention: consult
accompanying documents.
isolated (floating) applied part.
i Type B equipment with an F-type
Danger! High Voltage!
Ls
“o
Disposable Suction Bottle
Reusable Suction Botile
Q
VE Patient
So SAS Ash Ads Heater Element
- Load Symbol
x O
΄ i <
Suction Line Filter
Examination Light
®
©
&
®
©
:
®
©
0906
Examination Light Switch
Mode Control Key
Temperature Override
Mode Key
Keypad Lock Key
Set Temperature Keys
Power On/Oif Switch
Celsius/Fahrenheit
Selection Key
Silence/Reset Key
Procedural Silence Indicator
Apgar Timer Reset Key
Apgar Timer Start/Stop Key

TABLE OF CONTENTS
11
1.2
13
SECTION PAGE
1 GENERALINFORMATION ................. 0... кии инея ния нонкння .. 1-1
МТАОРУСТЮМ ........ eee tees 1-1
DESCRIPTION AN 1-1
OPTIONS/ACCESSORIES ........................... else 1-1
MODEL IDENTIFICATION SERIES CHANGE ον 1-3
1.4
2.1
2.2
2.3
2.4
2.5
3 TECHNICAL INFORMATION ............. sise .. 3-1
3.1. SPECIFICATIONS 2000.00. ccc 이 이 이 이 이 디 이 이 이 일 미 리 디 이 이 미 아 미 다 이 리디아 3-1
3.2 THEORY OF OPERATION ーー に に トー し ュー し ーーー スト ーー スー 3-6
3.2.1 GENERAL eet es ea eee este be eeee teens eet nasa 3-6
3.2.2 OVERALLFUNCTIONAL DESCRİPTİON... ーー ーー 3-6
3.3 DETAILED CIRCUIT DESCRIPTION «τιν νετ ο νετ ο κο ε νοκ κε εκτ κ νεο οκ εν 3-14
3.3.1 ГАЗРЬАУ ο μυ, 3-14
3.3.2 POWER AND CONTROL PCB2 し ni 3-14
3.33 POWER SUPPLY CIRCUIT иначе ление, 3-14
3.34 CONTROLCIRCUİTAY...................... 3-15
3.35 SYSTEMINTERFACES i... iii トー ニーーーーーーーー 3-16
3.3.6 SYSTEM FAILLOGIC eeeeeeeneeeees 3-16
3.3.7 POWER FAIL LOGIC ーー に に ーー トー に ーー トー トー ニー スバ ーー 3-16
3.3.8 PNEUMATIC SYSTEM し し eee 3-17
3.3.9 ”WARMER HEAD r renee kr ити яннн. 3-19
4 PREVENTIVE MAINTENANCE ..... e 4-1
44 GENERAL... Gİ
42 MAINTENANCE に に тии наи линии аула нь альи 4-1
43 CLEANİNG............. クラー に ーー に ーーーーーーーーーー 4-1
4.31 DISASSEMBLY FOR CLEANING .................. A 4-1
4.3.2 CLEANINGPROGEDURES ........................ 1... 4-4
44 STERILIZATION に ュー し ーー aa rer 4-5
45 “REASSEMBLY AFTER CLEANING 0 οκ ένο 4-5
4.6 CALIBRATION ο, 4-5
47 TROUBLESHOOTING に に ーー トー トー トー スー ドー 4-5

TABLE OF CONTENTS (cont) |
SECTION PAGE
5.10 TROUBLESHOOTING し し に に ーー トー ドー し ーー トー トー トー 8-30
5.10.1 GENERAL TROUBLESHOOTING GUIDELINES
FORSYSTEMERRORCODES..................... 이 5-30
5.10.2 GENERAL TROUBLESHOOTING GUIDELINES
FOR SYSTEM DIAGNOSTIC CODES ーーー ーーー トーーーーー 5-31
5.10.3 GENERAL TROUBLESHOOTING GUIDELINES
FOR THE RADIANT WARMER HEAD ............... 0... 5-33
5.10.4 GENERAL TROUBLESHOOTING GUIDELINES
FOR THE PNEUMATIC HARDWARE ーーーーーー 5-84
5.11 REMOVAL AND REPLACEMENT PROCEDURES ................................ 5-36
5.11.1 @ЕМЕВАЕ ...... iii леньн 5-36
5.11.2 REMOVING AND REPLACING THE BACK COVER ......................... 5-36
5.11.3 REMOVING AND REPLACING THE CONTROLLER MODULE ................ 5-37
5.11.4 REMOVING AND REPLACING THE BLENDER MODULE .................... 5-37
5.11.5 REMOVING AND REPLACING THE RESUSCITATION MODULE .............. 5-38
5.11.6 REMOVING AND REPLACING THE GAS SUPPLY MODULE ................. 5-39
5.11.7 REMOVING AND REPLACING THE QUARTZ HEATING ELEMENT ........... 5-40
5.11.8 REMOVING AND REPLACING THE CONTROLLER FRONT PANEL ........... 5-42
5.12 RESUSCITATION MODULE CHECK AND CALIBRATION PROCEDURES ............. 5-44
6 PARTSLIST ........--. чении n すす たま すす すす すす を すす すす 6-1
61 GENERAL ............. ---υ-ἷ-ἷ-,, 6-1
62 RECOMMENDEDSPAREPARIS.............................. 6-1
63 REPLACEABLE PARTS, DISPOSABLES AND ACCESSORIES ....................... 6-1
7 DIAGRAMS κε κκ κκ ερ εντ εκ εκ εαν εκ ε εκ κκ κ αχ κε ες ων κο 7-1
TA GENERAL... eee 7-1

LIST OF FIGURES
FIGURE PAGE
SECTION 1
11 EQUIPMENT PROVIDED WITH FACTORY INSTALLED OPTIONS
AND FIELD INSTALLED ACCESSORIES i 1-2
SECTION 2
2.1 INSTALLATION AAN 2-2
2.2 CHECKING THE BASSINET TILT CONTROL ... 2-5
2.3 CHECKING THE BASSINETSIDE PANELES нии eue 2-5
24 CHECKING THE BASSINET FRONT PANEL (RAISING THE PANEL) ................... 2-6
2.5 CHECKING THE BASSINET FRONT PANEL (SLIDING THE PANEL) ................... 2-6
2.6 CHECKING THE PASS-THROUGH DRAWER
2.7 CHECKING THE WARMER MODULE SWIVEL
2.8 CHECKING THE X-RAYTRAY κκ ον εκ νων εννοω ενω νοκ οωνε νο κενών ε νέων κ ον ε κε ων ων
3.9 CHECKING THE INSTRUMENT TRAY
2.10 CHECKING THE SUCTION BOTTLE
SECTION 3
3.1 RESUSCITAIRES ВАГЛАМТ ММАВМЕВ ......... еее νν κκ χω ωνεν ον ον 3-6
3.2 SUCTION FUNCTIONAL BLOCK DIAGRAM eee 3-8
3.3 RESUSCITATION MODULE WITH AUTOBREATH,
PATIENT GAS SUPPLY AND AUXILIARY FLOW ee ον 3-9
3.4 PATIENT BREATHING CIRCUIT FOR AUTOMATIC VENTILATION .................,., 3-10
3.5 PATIENT BREATHING CIRCUIT FOR MANUAL VENTILATION
WITH THE AUTOBREATH INFANT RESUSCITATOR ................,.,.....,.,,,.. 3-10
3.6 RESUSCITATION MODULE WITHOUT AUTOBREATH ..............,,.,,,,,.404482 3-11
3.7 PATIENT BREATHING CIRCUIT FOR MANUAL VENTILATION WITHOUT
THE AUTOBREATH INFANT RESUSCITATOR
3.8 GAS SUPPLY に に に に に に rra rr rr 3-12
SECTION 4
4.1 REMOVING BASSINET SIDE PANELS
4.2 REMOVING BASSINET BACK PANEL
43 BASSINET FRONT PANEL RELEASE TABS .............. 00 4-3
44 REMOVING THE BASSINET FRONT PANEL uses νο 4-3
SECTION 5
5.1 DIAGNOSTIC MODE START-UP DISPLAY ................ eee rezan 5-6
SECTION 6
6.1A PARTS LOCATION DIAGRAM, RESUSCITAIRE® RADIANT WARMER ASSEMBLY,
NO RESUSCITAMON(SHEETİOF1)........................ erener 6-4
6.iB PARTS LOCATION DIAGRAM,
RESUSCITAIRE® RADIANT WARMER ASSEMBLY (SHEET 1 OF 1) .................... 6-8
6.1C PARTS LOCATION DIAGRAM, WALL MOUNTED RESUSCITAIRE® RADIANT WARMER,
ASSEMBLY ............ νε ερν εκ εκ ενν κε κών εκ ρε εκ εκ εκ εννον οκ ον Lecce eee ee ence eens 6-13A
6.1D PARTS LOCATION DIAGRAM, RESUSCITAIRE® RADIANT WARMER ASSEMBLY, NO RE-
SUSCITATION VHA, 120V, ENG (SHEET 1 OF 1) 0.0.0... cee cece een ene eens 6-13C
6.1E PARTS LOCATION DIAGRAM, RESUSCITAIRE® RADIANT WARMER ASSEMBLY VHA 6-13G
Change 2
vi

LIST OF FIGURES (continued)
FIGURE PAGE
SECTION 6 (CONTINUED)
6.2
6.2A
6.2B
6.2C
6.3
64
6.5
6.6
6.7
6.8
6.9
6.10
6.11
6.12
6.13
6.14
6.15
PARTS LOCATION DIAGRAM,
RESUSCITAIRE® RADIANT WARMER CART ASSEMBLY (SHEET 1 OF 1)............. 6-14
PARTS LOCATION DIAGRAM,
RESUSCITAIRE® RADIANT WARMER BASIC VHA CART ASSEMBLY (SHEET 1 OF 2) 6-17A
PARTS LOCATION DIAGRAM,
RESUSCITAIRE® RADIANT WARMER 120V, 220-240V VHA CART ASSEMBLY
(SHEET 1 OF ーー 6-17G
PARTS LOCATION DIAGRAM,
RESUSOITAIRE RADIANT WARMER 240V VHA CART ASSEMBLY, UK
(SHEET 1 OF 2) cece K né 6-17M
PARTS LOCATION DIAGRAM,
RESUSCITAIRE® RADIANT WARMER BASSINET SUB-ASSEMBLY (SHEET 1 OF 1) ... 6-18
PARTS LOCATION DIAGRAM,
RESUSCITAIRE® RADIANT WARMER HEAD ASSEMBLY (SHEET 1 OF 1)............. 6-20
PARTS LOCATION DIAGRAM,
RESUSCITAIRE® RADIANT WARMER, WARMER HEAD
SUBASSEMBLY (SHEETİOFİ) ................ eee 6-24
PARTS LOCATION DIAGRAM,
RESUSCITAIRE® RADIANT WARMER CONTROLLER ASSEMBLY (SHEET 1 OF 1) .... 6-26
PARTS LOCATION DIAGRAM,
RESUSCITAIRE® RADIANT WARMER BLENDER ASSEMBLY (SHEET 1 OF 1) ......... 6-30
PARTS LOCATION DIAGRAM,
RESUSCITAIRE® RADIANT WARMER_ RESUSCITATION MODULE
(W/O THE AUTOBREATH INFANT RESUSCITATOR) ASSEMBLY (SHEET 1 OF 1) ...... 6-32
PARTS LOCATION DIAGRAM,
RESUSCITAIRE® RADIANT WARMER RESUSCITATION MODULE
(WITH THE AUTOBREATH INFANT RESUSCITATOR) ASSEMBLY (SHEET 1 OF 1) ..... 6-34
PARTS LOCATION DIAGRAM,
RESUSCITAIRE® RADIANT WARMER
Op PIPELINE (DISS/NIST) WITH O2 CYLINDER (PIN-INDEX)
GAS SUPPLY ASSEMBLY (SHEET 1 OF 4) ..... Lei 6-36
PARTS LOCATION DIAGRAM,
RESUSCITAIRE® RADIANT WARMER
Oz/AIR PIPELINE (WHITE HOSE) WITH O2 CYLINDER (DIN FITTINGS)
GAS SUPPLY ASSEMBLY (SHEET 1 OF 1) 上 に し に に に に に に に に に に ーー トト トー トト トト レレレ ーー て 6-40
PARTS LOCATION DIAGRAM,
RESUSCITAIRE® RADIANT WARMER,
OJ/AIR PIPELINE (DISS/NIST) WITH Gz/AIR CYLINDER (PIN-INDEX)
GAS SUPPLY АЗЗЕМВИУ (ЗНЕЕТ 1 ОЕ 1) ........ eserse 6-44
PARTS LOCATION DIAGRAM,
RESUSCITAIRE® RADIANT WARMER -
Os/AIR HOSE ASSEMBLY WITH CYLINDER (DIN FITTINGS)
GAS SUPPLY ASSEMBLY (SHEETİOF1)...................... uses εν τα 6-48
PARTS LOCATION DIAGRAM,
RESUSGITAIRE® RADIANT WARMER -
PCB1 DISPLAY BOARD ASSEMBLY (SHEET 1 OF 1) ............ теннис, 6-52
PARTS LOCATION DIAGRAM,
RESUSCITAIRE® RADIANT WARMER
PCB2 POWER AND CONTROL BOARD ASSEMBLY (SHEET 1 OF 1) ................. 6-54
Change 2
vii

LIST OF FIGURES (continued)
FIGURE PAGE
SECTION 7
7.1 RESUSCITAIRE® RADIANT WARMER,
PCB1 DISPLAY BOARD, SCHEMATIC (SHEET 1 OF 1) ーーーーーーー 7-3
7.2 RESUSCITAIRE® RADIANT WARMER,
PCB2 POWER AND CONTROL BOARD, SCHEMATIC (SHEET 1 OF 1) ................. 7-4
73 RESUSCITAIRE® RADIANT WARMER,
INTERCONNECT DIAGRAM, SERIES 00 (SHEET 1 OF 1 ーーー. し ーーーーー 7-5
7.3A _RESUSCITAIRE® RADIANT WARMER,
INTERCONNECT DIAGRAM, SERIES 01 (SHEET 1 OF 1) eee 7-5A
7.4 RESUSCITAIRE® RADIANT WARMER,
WARMER HEAD ASSEMBLY WIRING, SCHEMATIC, SERIES 00 (SHEET 1 OF 1) ....... 7-6
7.44 RESUSCITAIRE® RADIANT WARMER,
WARMER HEAD ASSEMBLY WIRING, SCHEMATIC, SERIES 01 (SHEET 1 OF 1) ....... 7-7
7.5 RESUSCITAIRE® RADIANT WARMER,
PNEUMATIC SYSTEM (WITH THE AUTOBREATH INFANT RESUSCITATOR).SCHEMATIC
(SHEET 1 OF 1) | 7-8
7.6 RESUSCITAIRE® RADIANT WARMER,
PNEUMATIC SYSTEM (W/O THE AUTOBREATH INFANT RESUSCITATOR) SCHEMATIC
(SHEET 1 OF 1) ....... ааа ааа ааа ааа льна 7-9
№77 SCHEMATIC DIAGRAM, POWER ACTUATOR ..... νι νετ ーー ーー ニー トー ーーーーーー 7-10
Change 2
viii