Mocka Solid Wooden Stool User manual

AB
Hardware Supplied
Solid Wooden Stool
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
1
mocka.co.nz | mocka.com.au
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
Phillips & Flathead screwdrivers required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Bolt
x8
washer
x8
C
feet
x4

2
12
Solid Wooden Stool
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
1
A
B
2
3
3
2
Attach legs [2] and [3] to panel [1] with 8 x bolt (A) and secure with 8 x washers (B).
Tighten with a screwdriver.
C
CC
C
Cross the leg [3] with the leg [2] as shown. Attach 4 x feet (C) to the bottom
of the legs.