Hindware OLYMPUS URINAL User manual

INSTALLATION INSTRUCTIONS FOR
OLYMPUS URINAL
CAT No. 96002/60006

STEPS FOR INSTALLATION
2
Hang the Urinal and insert the outlet of
bellow inside outlet with rubber adaptor
hole & tighten the screws on the wall.
After hanging Urinal on brackets mark the
position of screw fixing holes by marker pen
and make holes in to the wall by drill bit of 5
mm Ø & place PVC sleeves inside the holes.
700 mm
320 mm
1
Fix the brackets at a distance of 320 mm at
desired location. The recommended height
from front rim to finished floor is 700mm.
3
Fix the PVC bellow on outlet with rubber
adapter at back side & make an outlet hole
inside wall at the same level.
45 6
After installation place the
ceramic perforated plate in the
water outlet area.
Fit the water spreader inserting it from
inside the bowl, push it up & tighten the
nut & connect to water line.