Hioth CT-HAWF1008-BL User manual

HIOTH User Manual
HIOTH TECHNOLOGY CO.,LTD.
SMART PLUG
Introduction
The Smart Plug (SP Mini) using WiFi technology. It is suitable for air conditioners, water
heaters and other various power of household appliances. This product can be included and oper-
ated in any WiFi network with other devices from any other manufactures. It can also be used to
prevent electrical insulation damage generated by the grounding fault, fire hazard or overload cur-
rents caused by lightning. This product has the advantages of leakage protection, overcurrent pro-
tection, short-circuit protection, overvoltage protection, under-voltage protection, lightning pro-
tection and so on, it can also complete elimination of electrical fire accidents and prolong the ser-
vice life of the electric appliances.
With the advantages of high sensitivity, strong anti-interference ability, high impact re-
sistance, stable performance, long service life, the Smart Plug has become a safe and ener-
gy-saving type ideal product in families and industrial sites.
CT-HAWF1008-BL
Smart Plug

HIOTH User Manual
HIOTH TECHNOLOGY CO.,LTD.
Technical Information
Local and remote wireless control
Built in power statistics module, which can query the information of power consumption in
real time.
Using flame retardant PC, safe and reliable
Leakage protection, overcurrent protection, short-circuit protection, overvoltage protection,
under-voltage protection, lightning protection
Specifications
Radio protocol: WiFi (802.11 b/g/n)
The input / output voltage: 100-240V AC 50/60Hz
The maximum load: 10A/2200W
Working temperature: -20 ~ 60℃
Power consumption: ≤0.5W
Switch life: ＞50000 times
Safety Protection: Child protection
Socket jack type: Standard five hole
Dimension：75mm × 44mm × 58mm
Operation
As shown in Figure 1, there is an on / off button, a power supply jack and an indicator light on the
switch control panel.

HIOTH User Manual
HIOTH TECHNOLOGY CO.,LTD.
Fig.1
Including of WiFi Network
1) Power on the device.
2) Press and hold the on / off button for 5 seconds then release the button, until the WiFi Indi-
cator LED flash quickly with a blue light.
Fig.2
3) Choose " Broadlink " to enter the Network Inclusion mode on the APP, then click " ".

HIOTH User Manual
HIOTH TECHNOLOGY CO.,LTD.
4) Check the status of the WiFi Indicator LED, if the blue light flashes slowly confirming the
device is connecting to the wireless network, if the blue light stop flashing confirming the
device has been included into the network.
5) Please go to the device list interface, and refresh the device list, the device will be displayed.
Installation Instructions
This device is applicable to household appliances, air conditioners, water heaters and other each
kind of size power power on / off, can also be used to measure power appliances. In addition,
when you install the WiFi Smart Plug, it is not need wiring require and only need to insert the jack
into proper place, which can make the installation completed.
INSTALLATION TIPS
a) The specification: Input: 100V-240VAC
Output: 100V-240VAC
b) Because this device is a WiFi device, please place it in the WiFi range, in order to ensure the
remote control effect when installing.

HIOTH User Manual
HIOTH TECHNOLOGY CO.,LTD.
Safety Notice
This device is a wireless communication product, please do not place the device to work in
the metal container, in case the signal is blocked.
Keep the device away from a strong sunlight, humidity, high temperature, dust or mechanical
shock.
Keep the device away from acid-base and other corrosive solids, liquids, gases, to avoid
damage.