Hitachi HIY01 User manual

HIY01 User Manual

Introduction
Thank you for purchasing the HIY01. Before using your cell phone, be sure to read the Basic Manual (this PDF manual) to
ensure correct usage. After you have finished reading this manual, store this PDF manual and the printed manuals in safe
places so you can retrieve them whenever you need them.
Manuals for the HIY01
The HIY01 comes with the Basic Manual and Instruction Manual.
●For learning the basics:
Read the Basic Manual (this manual).
●For learning details on using each function:
Read the supplied Instruction Manual (Japanese). Be sure to read the Safety Precautions "安全上のご注意" to ensure
proper usage of the HIY01.
The keyword searchable au Online Manual is also available on the au homepage:
http://www.au.kddi.com/manual/index.html
To access from EZweb: R⇒au one Top ⇒
auお客さまサポート (au Customer Support) ⇒
オンラインマニュアル (Online Manual)
Scan this QR code to access the au Online Manual. ▶
•

1
Illustrations and Screenshots in This Manual
Note on Illustrations
The illustrations in this manual may look different from the actual cell phone in shape, color and typeface. The key
illustrations are also simplified as shown below.
Key Illustration Key Illustration
①&⑦R
②L⑧C
③N⑨F
④
123
456
789
*0#
⑩(
⑤cjs ⑪o
⑥%⑫f
Note on Screenshots
The screenshots in this manual are simplified and may look different from the actual cell phone screens.
The display design themes of your cell phone vary by model color.
■
■
•
①
②⑦
⑧
③
④
⑥
⑤
⑨
⑩
⑪
⑫
①
②⑦
⑧
③
④
⑥
⑤
⑨
⑩
⑪
⑫

2
Notes on Cell Phone Use
Cell Phone Etiquette
The cell phone always emits weak radio waves when power
is on.
Use the cell phone in an enjoyable and safe manner without
forgetting to be considerate of others around you.
Use of cell phones is not allowed in some places.
Do not use the cell phone while you are driving. Doing
so is both dangerous and prohibited by law.
Using a cell phone in an aircraft is prohibited by law.
Be sure to turn the cell phone off.
Radio waves from cell phones may interfere with
medical electrical equipment.
Some people close to you in crowded places such
as packed trains may be using a cardiac pacemaker.
Turn the cell phone off in such places.
Abide by the rules of hospitals and other medical
institutions where it is forbidden to use or carry cell phones.
Be considerate of where you use the cell phone and
how loudly you talk.
Do not make calls in theaters, museums, libraries, and
other similar places. Turn power off or turn on manner
mode not to disturb others around you by ring tones.
Do not use the cell phone on a street where you might
interrupt the flow of pedestrians.
Move to areas where you will not inconvenience others
on trains or in hotel lobbies.
Refrain from talking in a loud voice.
●
•
•
●
•
•
●
•
•
•
•
Obtain the permission of other people before you take
their photos with the cell phone's camera.
Do not record information with the cell phone's camera
in bookstores and other locations where taking photos
is not permitted.
Do Not Use the Cell Phone While Driving!
Turn off your cell phone or put it in Drive Mode while
driving.
Do not use the cell phone while driving a car/motorcycle
or riding a bicycle. It may result in a traffic accident. Using
a cell phone while driving is prohibited by law. Using a
cell phone while riding a bicycle may also be punishable
by law.
Prohibited!
Looking at a cell phone display
Talking on a cell phone while holding it
Drive Mode
In Drive Mode, a Japanese message meaning "I'm
driving now, so I can't answer your call." is played
when a call is received, and asks the caller to leave a
message on the answer memo.
When the standby screen is displayed, press , use
to select Drive, and then press (Set).
•
•
•
•

3
Disaster Message Board Service
When a big scale disaster occurs, you can register
your safety information from EZweb. The registered
information can be referred from anywhere in Japan from
EZweb or Internet.
When a big scale disaster occurs, from
an au phone, you can register your
safety information (i.e. your condition
and comments) to the 災害用伝言板
(Disaster Message Board) created on
the EZweb.
After registration of your safety
information, e-mail is sent to your family
or acquaintances you have previously
designated to notify that your safety
information has been uploaded to
the 災害用伝言板 (Disaster Message
Board).
You can inquire for safety information
of a person by entering his/her phone
number from EZweb or Internet.*
* To inquire from other carriers' cell
phone, a PHS or PC, access
"http://dengon.ezweb.ne.jp/".
Access
R⇒au one Top ⇒
災害用伝言板 (Disaster
Message Board)
http://dengon.ezweb.ne.jp/
•
•
•
The maximum storage period of the registered
information is 72 hours.
The maximum available number of registrations is 10
per phone number. When the number of registrations
exceeds 10, the oldest one is overwritten.
The demonstration of this service can be referred to
anytime by pressing ⇒au one Top ⇒
auお客さま
サポート
(au Customer Support) ⇒ 調べる (Search)
⇒
災害用伝言板（デモ版） (Disaster Message Board
(Demo Version)).
To view the Disaster Message Board in English, select
English from the top menu of the Disaster Message
Board.
•
•
•
•
Registering
safety
information
Registering
safety
information
Inquiring
for safety
information
Inquiring
for safety
information

4
Contents
Introduction
Illustrations and Screenshots in This Manual 1
Notes on Cell Phone Use 2
Cell Phone Etiquette …………………………………… 2
Do Not Use the Cell Phone While Driving!…………… 2
Disaster Message Board Service …………………… 3
Contents 4
Getting Ready 6
Checking the Contents of the Box …………………… 6
Names of Parts ………………………………………… 7
Charging the Battery Pack …………………………… 8
Learning the Basics …………………………………… 9
Turning On Power ……………………………………… 10
Switching the Display Language to English ………… 10
Initial Setup of E-mail and EZweb …………………… 10
Checking Your Phone Number and E-mail Address … 10
Display Indicators ……………………………………… 11
Changing Your E-mail Address ……………………… 12
Security Code and Passwords ………………………… 13
Making and Answering Calls 14
Making a Call …………………………………………… 14
Making an International Call…………………………… 14
Answering a Call ……………………………………… 15
Returning a Call (Outgoing History/Incoming History ) … 16
One-ring Calls…………………………………………… 16
Adjusting the Earpiece Volume during a Call ……… 16
Turning On Manner Mode ……………………………… 16
Changing the Incoming Ring Tone …………………… 17
Adjusting the Incoming Ring Tone Volume…………… 17
Turning On the Answer Memo ………………………… 18
Global Functions 19
Setting Area …………………………………………… 19
Calling to Japan from Overseas ……………………… 19
Character Input 20
Character Entry Modes ………………………………… 20
Entering Alphanumeric Characters …………………… 20
Entering E-mail Addresses …………………………… 21
Entering Pictograms …………………………………… 22
Phone Book 23
Saving a Phone Book Entry …………………………… 23
Dialing from the Phone Book ………………………… 23
Editing Phone Book Entries …………………………… 23
Saving a Phone Number from the Incoming
or Outgoing History …………………………………… 24

5
Pair Function 25
Registering a Pair Partner …………………………… 25
Making a Call to a Pair Partner ……………………… 25
Sending Mail to a Pair Partner ………………………… 25
Mail 26
Using E-mail …………………………………………… 26
Creating and Sending E-mail Messages …………… 26
Reading Received E-mail Messages ………………… 27
Reading an E-mail Message
with an Attached Photo or Movie……………………… 27
Replying to Received E-mail Messages……………… 27
Rejecting Spam ………………………………………… 28
Using C-mail …………………………………………… 29
Creating and Sending C-mail Messages …………… 29
Reading Received C-mail Messages ………………… 29
Camera 30
Taking a Photo ………………………………………… 30
Viewing Photos ………………………………………… 30
EZweb 31
Accessing Sites ………………………………………… 32
Bookmarking Frequently Accessed Pages ………… 33
Viewing Bookmarked Pages…………………………… 33
Checking Charges ……………………………………… 34
Downloading Chaku-Uta-Full®/Chaku-Uta®………… 34
EZ News Flash/au one Gadget 35
Basic Operations ……………………………………… 35
Setting EZ News Flash ………………………………… 35
EZ Navi 37
Passenger Seat Navi for People
in the Passenger Seat to Check the Route ………… 37
Security Navi to Check Where Your Kids Are ……… 37
EZ Navi Walk for When You Go Out ………………… 38
Evacuate Navi to Guide You Home or to Nearby
Evacuation Areas during Disasters…………………… 39
TV (1Seg) 40
Initial Setup of au Media Tuner………………………… 40
Watching TV (1Seg) …………………………………… 41
Basic Operations ……………………………………… 41
Exiting the au Media Tuner …………………………… 41
Bluetooth 42
Registering Bluetooth®Devices ……………………… 42
Registering Wireless Devices and Hands-free Devices …42
Using Bluetooth®Functions …………………………… 43
USB Connection 44
Connecting to PCs……………………………………… 44
In Case of Loss of Your Cell Phone 45
Setting Conditions for Activating the Remote Ctrl Lock …… 45
Remotely Activating the Remote Ctrl Lock on Your Cell Phone …45
Activating the Remote Ctrl Lock
by the Security Lock Service ………………………… 46
Troubleshooting 47
FCC Notice 49
Index 50

6
Getting Ready
Checking the Contents of the Box
The box contains the cell phone and accessories.
Cell phone
Battery pack
CD-ROM
Instruction Manual (Japanese)
Warranty (Japanese)
Safety Precautions (Japanese)
The following accessories are not included.
- microSD memory card - Desktop holder - AC adapter
- USB cable - Earphone jack conversion adapter - Stereo earphone
Purchase a common AC adapter 01/02 (sold separately).
•
•
•
•
•
•
•

7
Names of Parts
From the Front■
* Do not remove this card unnecessarily
as your phone number is recorded on it.
au IC-Card*
Earpiece
Address book
key
End/Power key
Microphone
Application key
EZ key
Clear/Memo key
Mail key
Answer/Pair
key
Number keys
Display
Optical sensor
Cursor key
Center key
Strap eyelet
Incoming
indicator
(LED)
Built-in
antenna
Built-in
antenna
Battery pack/
cover
Photo light/
Pocket light
Infrared port
FeliCa mark
Camera
start
indicator
Camera lens
Speaker
Manner key
Charge indicator
(LED)
microSD memory card slot cover
microSD memory
card slot
External
connection
jack cover
External
connection
jack
Lock knob
Charging terminals
TV antenna
Up key (side)
Down key (side)
* Do not remove this card unnecessarily
as your phone number is recorded on it.
au IC-Card*
Earpiece
Address book
key
End/Power key
Microphone
Application key
EZ key
Clear/Memo key
Mail key
Answer/Pair
key
Number keys
Display
Optical sensor
Cursor key
Center key
Strap eyelet
Incoming
indicator
(LED)
Built-in
antenna
Built-in
antenna
Battery pack/
cover
Photo light/
Pocket light
Infrared port
FeliCa mark
Camera
start
indicator
Camera lens
Speaker
Manner key
Charge indicator
(LED)
microSD memory card slot cover
microSD memory
card slot
External
connection
jack cover
External
connection
jack
Lock knob
Charging terminals
TV antenna
Up key (side)
Down key (side)
From the Back■From the Sides■

8
Confirm that the charge indicator lights.
Charging: A charge beginning sounds and the charge
indicator lights.
Charging finished: A charge completion sounds and
the charge indicator goes out.
➡
•
•
Charging the Battery Pack
The battery pack is not fully charged at the time of purchase.
Be sure to charge the battery pack before using the cell
phone for the first time.
An AC adapter is not included. Purchase a common AC
adapter 01/02 (sold separately).
Connect the common AC adapter 01/02 to the
cell phone.
Check the shape of the connector of the common AC
adapter 01/02 and then plug it straight into the power
terminal of the cell phone.
Unfold the power plug of the common AC
adapter 01/02 and plug it into a 100 V AC power
outlet.
•
➡
•
➡
1
2
3 Charge indicator
1
2
3 Charge indicator

9
Learning the Basics
Key Assignments
Side Key Assignments
If you lose track of where you are or if you make a mistake, press to return to the previous screen. Return to the
standby screen by holding down for at least one second.
■
■
•
&
l
C
N
0〜9*#:
u
c
%
r
d
F
: Display Alert window/Shortcut
menu.
: Make/answer calls.
Use the Pair function.
: Set/cancel Answer memo.
Delete characters.
Cancel operation.
: Display Incoming History.
: Display the ticker field, info pane and
gadget (setting) icon.
: Display Main menu.
R: Display EZ Service menu.
: Turn power on/off.
End call/communication.
Cancel operation.
Input phone numbers and characters.
: Display Outgoing History.
: Activate EZapps.
: Use Phone Book.
L: Send/receive e-mail/c-mail.
&
l
C
N
0〜9*#:
u
c
%
r
d
F
: Display Alert window/Shortcut
menu.
: Make/answer calls.
Use the Pair function.
: Set/cancel Answer memo.
Delete characters.
Cancel operation.
: Display Incoming History.
: Display the ticker field, info pane and
gadget (setting) icon.
: Display Main menu.
R: Display EZ Service menu.
: Turn power on/off.
End call/communication.
Cancel operation.
Input phone numbers and characters.
: Display Outgoing History.
: Activate EZapps.
: Use Phone Book.
L: Send/receive e-mail/c-mail.
(: Set/cancel manner mode.
o: Activate Pocket light.
f: Activate au Media Tuner.
(: Set/cancel manner mode.
o: Activate Pocket light.
f: Activate au Media Tuner.

10
Use jto select 画面表示 (Screen Display) and
then press c(選択 [Select]).
Use jto select Set Language and then press
c(選択 [Select]).
Use jto select English and then press
c(Set).
Initial Setup of E-mail and EZweb
To use e-mail and EZweb, you need to apply for an EZweb
subscription. If you did not apply for an EZweb subscription
at the time of purchase, contact an au shop or the au
Customer Service Center.
Also, before use, you need to configure initial settings. Your
e-mail address is assigned automatically in the initial setup.
When the standby screen is displayed, press L.
Press c(OK).
After a short while, your e-mail address is displayed.
Press c(OK).
The initial settings are complete.
You can also configure initial settings by pressing
or .
Checking Your Phone Number
and E-mail Address
When the standby screen is displayed, press c
and then 0.
➡
➡
➡
➡
➡
•
Hiding/Redisplaying the Alert Window
When the alert window is displayed on the standby screen,
you can temporarily hide it by pressing &(Back) and then
display the Main menu by pressing c.
To redisplay the hidden alert window, press dwhen the
standby screen is displayed.
Turning On Power
Hold down Ffor at least a few seconds.
You cannot receive or make calls if out of range indicator
is displayed.
Turning Off Power
When the standby screen is displayed, hold down Ffor
at least one second.
Switching the Display Language
to English
You can switch the display language for function names
and other items to English.
When the standby screen is displayed, press c.
Use ato select
機能 (Function) and then
press c(選択 [Select]).
■
•
■
➡

11
Display Indicators
Display indicators inform you of mail arrival, current settings, etc.
Display
Indicator Description
①Signal strength
②Battery level
③A microSD memory card (commercially available) inserted
④During a call
au Media Tuner activated
⑤EZapps activated
⑥Connecting to EZweb
⑦Receiving EZ News Flash information
⑧Missed calls
⑨New or unread e-mail/c-mail
⑩Current date and time
⑪Ticker field
⑫Search window
⑬Info pane
⑭Alert icon
⑮Shortcut menu
⑯Auto Lock/Side key disable feature on
⑰Manner mode set
⑱Answer memo or manner mode set
■
①
⑪
⑫⑬
⑭
②③④⑤⑥⑧⑦⑨
⑩
⑮
⑯⑰
⑱
①
⑪
⑫⑬
⑭
②③④⑤⑥⑧⑦⑨
⑩
⑮
⑯⑰
⑱

12
Use jto select 承諾する (Accept) and then
press c(Select).
Use jto select the entry box, press c(Input),
enter an e-mail address using single-byte
alphanumeric characters, and then press
c(OK).
For details on entering e-mail addresses, see page 21.
Use jto select 送信 (Send) and then press
c(Select).
Use jto select OK, press c(Select) and then
c(OK).
Check that the e-mail address has been updated
before pressing c(OK).
Your e-mail address cannot be changed if the new
address you enter in the above procedure is already
being used. In this case, enter a different e-mail
address.
➡
➡
•
➡
➡
•
•
Changing Your E-mail Address
You can change the account
name of your e-mail address.
When the standby screen is displayed, press L.
Use jto select E-mail Setup and then press
c(Select).
Use jto select Other and then press
c(Select).
The cell phone connects to the server.
Use jto select Eメールアドレスの変更 (Change
E-mail Address) and then press c(Select).
Use jto select the entry box, press c(Input),
enter your security code, and then press c(OK).
Your security code is the four-digit number you wrote
on your subscription form.
If the security code is incorrectly entered three times
consecutively during a single day, the e-mail address
change operation will be disabled until the next day.
Use jto select 送信 (Send) and then press
c(Select).
➡
➡
➡
➡
•
•
➡
△△△@ezweb.ne.jp
Account name Domain name
E-mail address
△△△@ezweb.ne.jp
Account name Domain name
E-mail address

13
Security Code and Passwords
You can use a security code and other passwords
described below.
Take care not to forget your security code and passwords,
because they are required for performing various
operations and using subscription services.
Security Code
Usage
Example
①Using the Answering Service (Voice
Mail) and Call Transfer remotely from a
fixed-line phone
②Making inquiries, applications, and
changes while using au Customer
Service Center voice guidance, au web
pages, and EZweb
③Changing the settings of Mail Filter or
Other under E-mail Setup
Initial Setting The four-digit number you wrote on your
subscription form
Lock No.
Usage
Example
Changing various settings of the cell
phone
Initial Setting 1234
■
■
EZ Password
Usage
Example
Subscribing or canceling subscriptions to
EZweb fee-based contents
Initial Setting The four-digit number you wrote on your
subscription form
Premium EZ Password
Usage
Example
①Subscribing or canceling subscriptions
to EZweb fee-based contents paid
by
まとめて au 支払い (au Collective
Payment Service)
②Purchasing products from EZweb sites
using
まとめて au 支払い (au Collective
Payment Service)
Initial Setting The four-digit number you wrote on your
subscription form
■
■

14
Making and Answering Calls
Making a Call
When the standby screen is displayed, use 0
to 9to enter a phone number.
When calling to a fixed-line phone, you also need to enter
the area code.
Press N.
To end the call, press F.
After you enter a phone number, you can add 184 or
186 to the phone number as follows:
Press (Call).
Use to select Add Special No. and then press
(OK).
Use to select 184 or 186 and then press (Add).
184: When you do not want to inform the other party of
your phone number.
186: When you want to inform the other party of your
phone number.
•
➡
•
•
➡
➡
➡
Making an International Call
au International Call Service
Available without any additional application
Example: To call 212-123-△△△△ in the USA
Press 005345.
↑
International access code
Press 1.
↑
Country code (USA)
Press 212.
↑
Area code
Press 123△△△△.
↑
Phone number
Press N.
Calling charges for this service are added to monthly
cell phone calling charges and billed together.
Check the country code at the au Customer Service
Center.
For charges, refer to au MOBILE PHONE SERVICE
GUIDE or au Customer Service Center.
■
➡
➡
➡
➡
•
•
•

15
001 KOKUSAI MOBILE TALK
Application required.
For inquiries, contact the KDDI Customer Service Center.
0077-7160
(toll-free; open 9:00 to 20:00 everyday including
weekends and national holidays)
Charges for 001 KOKUSAI MOBILE TALK are charged
separately from monthly au telephone charges.
Check the country code at the au Customer Service
Center.
For charges, refer to au MOBILE PHONE SERVICE
GUIDE or au Customer Service Center.
■
•
•
•
001
↑
KDDIinternational
accesscode
↑
Country
code
(USA)
↑
Areacode
↑
Phonenumber
010 212 123
-
XXXX1001
↑
KDDIinternational
accesscode
↑
Country
code
(USA)
↑
Areacode
↑
Phonenumber
010 212 123
-
XXXX1
Answering a Call
To answer a call, press N.
To end the call, press F.
Display When a Call is Received
The phone number of the caller appears.
If the caller's phone number and name are in the phone
book, the name is also displayed.
When the phone number of the caller is not displayed, one
of the following indicators may appear.
Indicator Meaning
ID Unsent The caller did not send a Caller ID.
Payphone The call is from a pay phone.
Not Support The call is from a phone that does not
support Caller ID.
Missed Call Notification
If you did not answer a call, Missed Call are displayed to let
you know that you missed a call.
To check the caller's phone number, use sto select
Missed Call and then press c(Select). You can then return
the call (see page 16).
•
■
■

16
Returning a Call (Outgoing History/
Incoming History)
Example: Returning a call to a phone number in the
incoming history
When the standby screen is displayed, press l.
Press rwhile the standby screen is displayed to display
the Outgoing History screen.
Use jto select the phone number you want
to call and then press c(Detail).
Press rto display the Outgoing History screen.
Press N.
The cell phone can store up to 50 phone numbers in
each of the incoming and outgoing history.
One-ring Calls
What is a One-ring Call?
A one-ring call is a call from an unknown caller that only
rings once, causing it to be stored in the incoming history.
One-ring calls are often used to get you to return the call,
which will connect you to a dating service or some other
service that charges you at high rates.
•
➡
•
➡
•
■
One-ring Indicator
One-ring indicator on the Incoming History screen indicates
you have received a one-ring call (a call rang for three
seconds or shorter). Be careful when you return a call to an
unknown caller.
Adjusting the Earpiece Volume
during a Call
During a call, use j.
u: Increases the volume.
d: Decreases the volume.
Press c(OK).
Turning On Manner Mode
When the standby screen is displayed, hold down
(for at least one second.
This turns on manner mode, and displays , ,
and on the standby screen. This also turns on Answer
memo, which is indicated by on the standby screen.
Turning Off Manner Mode
When the standby screen is displayed, hold down (for
at least one second.
Turning off manner mode causes , , and to
disappear from the standby screen. Answer memo is also
turned off, which is indicated by disappearing from the
standby screen.
■
•
•
➡
■

17
Even in manner mode, the cell phone still emits a
sound when autofocusing, a shutter sound when you
take a photo.
Changing the Incoming Ring Tone
When the standby screen is displayed, press c.
Use ato select Function and then press
c(Select).
Use jto select Sound/Vib/LED and then press
c(Select).
Use jto select Incoming Setup and then press
c(Select).
Use jto select Incoming Call and then press
c(Select).
Use jto select (Ringtone) and then press
c(Select).
Use jto select Original and then press
c(Select).
Use jto select a ring tone and then press
c(Set).
The incoming ring tone is set.
If you press &(Play), the tone plays.
Press %(OK).
•
➡
➡
➡
➡
➡
➡
➡
•
➡
Adjusting the Incoming Ring
Tone Volume
When the standby screen is displayed, press c.
Use ato select Function and then press
c(Select).
Use jto select Sound/Vib/LED and then press
c(Select).
Use jto select Incoming Setup and then press
c(Select).
Use jto select Incoming Call and then press
c(Select).
Use jto select (Ringtone Volume) and
then press c(Select).
Use jto adjust the volume and then press
c(Set).
Each press of jchanges the volume one step.
STEP ↑The ring tone volume gradually increases.
STEP↓ The ring tone volume gradually decreases.
Level5
󱽘
Level1
The ring tone sounds at the set volume.
OFF The ring tone does not sound.
Press %(OK).
➡
➡
➡
➡
➡
➡
•
➡

18
Turning On the Answer Memo
When the standby screen is displayed, hold down
Cfor at least one second.
is displayed on the standby screen.
Turning Off the Answer Memo
When the standby screen is displayed, hold down Cfor
at least one second. The answer memo is turned off and
disappears from the standby screen.
The cell phone can record a maximum of ten
messages, each up to 60 seconds long.
Answer memo is a function that automatically answers
calls and allows callers to record messages. Use the
Answering Service (Voice Mail) when your phone is
turned off or when you are in a location where a signal
cannot be received.
Playing a Message
If a message is recorded, Answer Memo appears
on the standby screen.
Use sto select Answer Memo and then press
c(Select).
Use jto select the message you want to play
and then press c(Play).
To stop playing the message, press c(Stop).
■
•
•
■
➡
➡
•
Deleting a Message
When the standby screen is displayed, press C.
Use jto select Answer Memo and then press
c(Select).
Use jto select Answer Memo List and then
press c(Select).
Use jto select the message you want to
delete and then press %(SubMenu).
Use jto select Delete and then press
c(OK).
Use jto select Delete One and then press
c(OK).
Use jto select YES and then press c(OK).
■
➡
➡
➡
➡
➡
➡