Hitachi Compute Blade 500 Series User manual

Hitachi Compute Blade 500 Series
LCD Touch Console User's Guide
MK-91CB500011-08
Document Organization
Product Version
Getting Help
Contents

© 2012-2015 Hitachi, Ltd. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying and recording, or stored in a database or retrieval
system for any purpose without the express written permission of Hitachi, Ltd.
Hitachi, Ltd., reserves the right to make changes to this document at any time without notice and
assumes no responsibility for its use. This document contains the most current information available
at the time of publication. When new or revised information becomes available, this entire
document will be updated and distributed to all registered users.
Some of the features described in this document might not be currently available. Refer to the most
recent product announcement for information about feature and product availability, or contact
Hitachi Data Systems Corporation at https://portal.hds.com.
Notice: Hitachi, Ltd., products and services can be ordered only under the terms and conditions of
the applicable Hitachi Data Systems Corporation agreements. The use of Hitachi, Ltd., products is
governed by the terms of your agreements with Hitachi Data Systems Corporation.
Hitachi is a registered trademark of Hitachi, Ltd., in the United States and other countries. Hitachi
Data Systems is a registered trademark and service mark of Hitachi, Ltd., in the United States and
other countries.
Archivas, Essential NAS Platform, HiCommand, Hi-Track, ShadowImage, Tagmaserve, Tagmasoft,
Tagmasolve, Tagmastore, TrueCopy, Universal Star Network, and Universal Storage Platform are
registered trademarks of Hitachi Data Systems Corporation.
AIX, AS/400, DB2, Domino, DS6000, DS8000, Enterprise Storage Server, ESCON, FICON,
FlashCopy, IBM, Lotus, MVS, OS/390, RS6000, S/390, System z9, System z10, Tivoli, VM/ESA,
z/OS, z9, z10, zSeries, z/VM, and z/VSE are registered trademarks or trademarks of International
Business Machines Corporation.
All other trademarks, service marks, and company names in this document or website are
properties of their respective owners.
Microsoft product screen shots are reprinted with permission from Microsoft Corporation.
ii
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide

Contents
Preface...................................................................................................v
Intended Audience.................................................................................................... vi
Product Version.........................................................................................................vi
Release Notes...........................................................................................................vi
Document Organization............................................................................................. vi
Referenced Documents..............................................................................................vi
Document Conventions............................................................................................. vii
Convention for storage capacity values...................................................................... vii
Getting Help............................................................................................................viii
Comments...............................................................................................................viii
1 LCD touch console overview.................................................................. 1-1
Overview................................................................................................................1-2
Connecting to Server chassis................................................................................... 1-3
Disconnecting from Server chassis........................................................................... 1-3
Storing of LCD touch console...................................................................................1-4
Function list............................................................................................................1-6
2 Functional detail................................................................................... 2-1
Home.....................................................................................................................2-2
Unconfirmed events..........................................................................................2-2
Operation status of system unit......................................................................... 2-2
System settings...................................................................................................... 2-3
Network settings.............................................................................................. 2-3
Service settings................................................................................................ 2-4
Time settings................................................................................................... 2-5
PIN settings..................................................................................................... 2-6
Import.............................................................................................................2-7
Legal information..............................................................................................2-7
Hardware maintenance........................................................................................... 2-7
Server blade.....................................................................................................2-7
Switch module................................................................................................2-12
Management module...................................................................................... 2-15
Fan module.................................................................................................... 2-18
Power supply module......................................................................................2-19
iii
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide

Server chassis................................................................................................ 2-21
Output dump log...................................................................................................2-23
Switch English/Japanese........................................................................................2-24
3 Software license information..................................................................3-1
Software license information....................................................................................3-2
iv
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide

Preface
This document describes how to use the Compute Blade 500 series.
Notice: The use of Compute Blade 500 series and all other Hitachi Data
Systems products is governed by the terms of your agreement(s) with Hitachi
Data Systems.
This preface includes the following information:
□Intended Audience
□Product Version
□Release Notes
□Document Organization
□Referenced Documents
□Document Conventions
□Convention for storage capacity values
□Getting Help
□Comments
Preface v
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide

Intended Audience
This document is intended for the personnel who are involved in planning,
managing, and performing the tasks to prepare your site for Compute Blade
installation and to install the same.
This document assumes the following:
•The reader has a background in hardware installation of computer
systems.
• The reader is familiar with the location where the Compute Blade will be
installed, including knowledge of physical characteristics, power systems
and specifications, and environmental specifications.
Product Version
This document revision applies to management module firmware A0240.
Release Notes
Read the release notes before installing and using this product. They may
contain requirements or restrictions that are not fully described in this
document or updates or corrections to this document.
Document Organization
The table below provides an overview of the contents and organization of this
document. Click the chapter title in the left column to go to that chapter. The
first page of each chapter provides links to the sections in that chapter.
Chapter Description
Chapter 1, LCD touch console
overview
Describes the LCD touch console overview.
Chapter 2, Functional detail Describes function of the LCD touch console in
detail.
Chapter 3, Software license
information
Describes software license information of LCD
touch console.
Referenced Documents
•Hitachi Compute Blade 500 Series Management Module Setup Guide,
MK-91CB500014
vi Preface
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide

Document Conventions
This term "Compute Blade" refers to all the models of the Compute Blade,
unless otherwise noted.
The Hitachi Virtualization Manager (HVM) name has been changed to Hitachi
logical partitioning manager (LPAR manager, or LP). If you are using HVM
based logical partitioning feature, substitute references to Hitachi logical
partitioning manager (LPAR manager, or LP) with HVM.
This document uses the following typographic conventions:
Convention Description
Regular text bold In text: keyboard key, parameter name, property name,
hardware labels, hardware button, hardware switch.
In a procedure: user interface item
Italic Variable, emphasis, reference to document title, called-out term
Screen text Command name and option, drive name, file name, folder name,
directory name, code, file content, system and application
output, user input
< > (angled brackets) Variable (used when italic is not enough to identify variable).
[ ] (square bracket) Optional values
{ } braces Required or expected value
| vertical bar Choice between two or more options or arguments
This document uses the following icons to draw attention to information:
Icon Meaning Description
WARNING This indicates the presence of a potential risk that
might cause death or severe injury.
CAUTION This indicates the presence of a potential risk that
might cause relatively mild or moderate injury.
NOTICE This indicates the presence of a potential risk that
might cause severe damage to the equipment
and/or damage to surrounding properties.
Note This indicates notes not directly related to injury
or severe damage to equipment.
Tip This indicates advice on how to make the best use
of the equipment.
Convention for storage capacity values
Physical storage capacity values (for example, disk drive capacity) are
calculated based on the following values:
Preface vii
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide

Physical capacity unit Value
1 kilobyte (KB) 1,000 (103) bytes
1 megabyte (MB) 1,000 KB or 1,0002 bytes
1 gigabyte (GB) 1,000 MB or 1,0003 bytes
1 terabyte (TB) 1,000 GB or 1,0004 bytes
1 petabyte (PB) 1,000 TB or 1,0005 bytes
1 exabyte (EB) 1,000 PB or 1,0006 bytes
Logical storage capacity values (for example, logical device capacity) are
calculated based on the following values:
Logical capacity unit Value
1 block 512 bytes
1 KB 1,024 (210) bytes
1 MB 1,024 KB or 1,0242 bytes
1 GB 1,024 MB or 1,0243 bytes
1 TB 1,024 GB or 1,0244 bytes
1 PB 1,024 TB or 1,0245 bytes
1 EB 1,024 PB or 1,0246 bytes
Getting Help
The Hitachi Data Systems customer support staff is available 24 hours a day,
seven days a week. If you need technical support, log on to the Hitachi Data
Systems Portal for contact information: https://portal.hds.com.
Comments
Please send us your comments on this document: [email protected].
Include the document title and number including the revision level (for
example, -07), and refer to specific sections and paragraphs whenever
possible. All comments become the property of Hitachi Data Systems
Corporation.
Thank you!
viii Preface
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide

1
LCD touch console overview
This chapter describes the LCD touch console overview.
□Overview
□Connecting to Server chassis
□Disconnecting from Server chassis
□Storing of LCD touch console
□Function list
LCD touch console overview 1-1
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide

Overview
The LCD touch console is an input/output device, which connects to the USB
port of front panel in a server chassis. The LCD touch console displays the
system unit status, and you can set up the system unit using the LCD touch
console. This guide describes the LCD touch console functions.
The LCD touch console is a device which displays various modules status,
such as server blade, switch module, power supply module, and fan module
in the system unit. The outline of the LCD touch console is shown below.
Figure 1-1 LCD touch console
Table 1-1 LCD touch console specifications
Items Specifications
USB cable length 1.5 m
LCD touch console Display resolution: 320x240 pixel
Output color: 18 bit color
Power: supplying from the server chassis
Memory: no data storage place for user
Some LCD touch console functions need a USB flash drive. You need to
prepare an USB flash drive with specifications shown below in the Table 1-2.
Table 1-2 USB flash drive specifications
Items Specifications
Capacity Up to 32 GB
Format FAT 32
USB interface 1.1 or 2.0
Tip: In the following steps, the > mark indicates the window transition by
touching a button.
Example: Home > System settings
1-2 LCD touch console overview
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide