HiTi Digital 640 DL User manual

Quick Start
Contents in Carton
Setting Your Printer
Installing Ribbon Cartridge
Installing Paper/Card
System Requirement
Installing Driver
Customer Service Claim
Contact Information
About PhotoDesiree
Installing Software
User Interface
Printing a Photo
About CardDesiree
Installing Software
User Interface
DesignYourTemplate
Print Your ID Card

 Quick Start
Contents in Carton
Before you begin to install your printer, check if you have the following
items.
 HiTi Photo Printer 640DL-Amphi x 1
 Plastic Card Cassette x 1
 Power Cord x 1
 USB Cable x 1
 CD (Windows Driver, PhotoDesiree, CardDesiree) x 1
 Printer/Software User Manual x 1
 Trial Clean Kit (2 sheets clean paper) x 1
 Warrantee Card x 1
HiTi Photo Printer 640DL-Amphi Plastic Card Cassette
Power CordUSB Cable
CD Printer/Software
User Manual

 Quick Start
Setting Your Printer
You may setup your HiTi 640DL-Amphi printer by following steps.
1. Connect the power cord to the power connection.
2. Connect the printer to your computer using the
USB cord.
3. Insert the ribbon cartridge into the printer, please see P.XX for more
information.
4. Place paper or plastic card into the paper cassette, please see P.XX for
more information.
5. Turn the printer power switch on. The green led light blinks and becomes
stable after 5 seconds. Before you turn on the power switch, make sure
the printer driver software is installed in your personal computer, please
see P.XX for more information about driver installation.
6. The New Hardware Found message box appears on the screen of your
computer. Windows starts to install the printer driver software by copying
files to your computer.
Notice!!
Always turning power switch off before connecting or disconnecting power
cord to AC source.

 Quick Start
Installing Ribbon Cartridge
You may install ribbon cartridge by following process.
1. Move the slider to open the top cover of the printer.
2. Hold the ribbon cartridge as the figure illustrated.
Be sure to point the arrow sign towards the
left-hand side of the printer.
3. Insert the cartridge all the way into the printer until
it is completely installed.
4. Close the top cover.
Notice!!
1. Make sure the purple parts on ribbon cartridge and printer are touched,
then you may close ribbon door.
2. Check LED is green after door closed, if LED is orange, try to close door
again.

 Quick Start
Installing Paper/Card
You may install photo paper or plastic card by following process.
1. Open the cover of the paper cassette.
2. Place a stock card into the paper cassette, make
sure the mis-corner is close to left-bottom side,
please refer to illustration.
3. Insert the paper cassette back into the printer.
Notice !!
1. Maximum paper capacity of 640DL-Amphi is 100
sheets, and maximum plastic card capacity is 25
sheets.
2.Please make sure the wider blank part of photo
paper is close to cassette exit, please see
instruction on paper package for more information.
3.Before thin plastic card printing, please make
“HiTi” logo up when printing front side of card, and
“iTiH” logo up when printing backside of card.

 Quick Start
System Requirement
Please check your PC conformed with following items.
 Pentium or compatible PC
 Operate only on Windows 98/ME/2000/XP
 128MB RAM or greater
 Available USB port
 100MB or greater free hard disk space
 CD-ROM Drive
Notice!!
1. Microsoft, MS, MS-DOS and Windows are registered trademarks of
Microsoft Corporations.
2. Pentium is a U.S. registered trademark of Intel Corporation.
3. Brands and product names are trademarks or registered trademarks of
their respective companies.

 Quick Start
Installing Driver
You may install 640DL-Amphi driver into your PC by following steps.
1. Insert “Driver CD” into CD-ROM drive, if disk doesn’t auto start, execute
file “autorun.exe” in the disk.
2. Select “Install HiTi 640DL-Amphi Driver” and install.
3. Press button “Start” for installation.

4. Connect printer to PC through USB cable and power it on.
5. In system Windows 2000 or Windows XP, if there’s message dialog
shows “Digital Signature Not Found ” or “Driver Incompatibility”, please
press “Yes” to continue installing driver.

 Quick Start
Customer Service Claim
 WEB Support
If you cannot find the answer and help from manual, you can visit HiTi’s
website. You can get new driver, updated application and more e-Frames
there.
 Customer Support Center
If your HiTi products cannot operate function normal, and the products are
in one-year period from the time you purchase, free service is provided.
Before placing a call for help, please make sure that:
1. You have checked your User Guide for these procedures.
2. You have checked this Manual for troubleshooting tips.
3. You have checked HiTi website for help.
4. If you buy this product from distributors, you need to contact them to get
help.
Please support following information, and we can solve your problem in the
fastest way.
1. Printer S/N.
2. Printer Model No.
3. Printer driver version (you can get it from "Control Panel/Printer/HiTi
640Amphi/Properties/About")
4. PhotoDesiree version. (you can get version number from PhotoDesiree)
5. Brand name/Model/System configuration of your PC.
6. Windows version (such as Windows 98 SE)
7. Application name and version (such as PhotoShop 6.0), when you used
this printer and occurred error at the same time.

 Quick Start
Contact Information
 Headquarter
Hi-Touch Imaging Technologies
Address: 3F, 31, Shuang-Shih Rd. Sec.3, Pan-Chiao City, Taipei County 220,
Taiwan
Tel: [phone]
FAX: [phone]
Web: http://www.hi-ti.com
E-mail: [e-mail]
 USA Office
Hi-Touch Imaging Technologies (America)
Address: 285 S, Dupont Ave. Suite#104 Ontario, CA 91761
Tel: [phone]
FAX: [phone]
Web: http://www.hitouchimaging.com
 Europe Office
Hi-Touch Imaging Technologies Netherlands B.V.
Address: Goudenheuvel 13, 5234 GA's -Hertogenbosch, The Netherlands
TEL: [phone]
FAX: [phone]
Web: http://www.hi-ti.nl
 UK Office
Hi-Touch Imaging Technologies (UK) Limited.
Address: Unit 7, Centurion Court, Brick close, Kiln Farm
Milton Keynes, Buckinghamshire, United Kingdom, MK11 3JB
TEL: [phone]
FAX: [phone]
Web: http://www.hi-ti.co.uk
 China Office
Hi-Touch Imaging Technologies (SuZhou)
Address: No 18, QunXing Road One, SuZhou Industrial Park, China
TEL: [phone]
FAX: [phone]
Web: http://www.hi-ti.com.cn

 About PhotoDesiree
Installing Software
You may install HiTi PhotoDesire into your PC by following steps.
1. Insert “Driver CD” into CD-ROM drive, if disk doesn’t auto start, execute
file “autorun.exe” in the disk.
2. Select “Install HiTi PhotoDesiree” and install.
3. Select language and destination then press button “Start” for
installation.

 About PhotoDesiree
User Interface
You may understand HiTi PhotoDesiree’s user interface from following
instruction.
Image Explorer : Load and explore image files.
Image Preview : Select printer, printout format and portrait or landscape.
Image Editor : Edit selected image.
Print Queue : Save images temporarily for printing.
Image Explorer :
Load and explore image files. Image Preview :
Select printer, printout format
and portrait or landscape.
Image Editor :
Edit selected image.
Print Queue :
Save images temporarily for printing.

 About PhotoDesiree
Printing a Photo
You may printout your first photo from HiTi PhotoDesiree by following
steps.
1.Load images from PC, DSC or scanner.
2.Select HiTi 640DL-Amphi“, then format supports 4”x6” photo only.
3.Select an image and press button for sending selected image to edit
area.
4.Use [Edit Tool] for more image effects.
5.Send edited images to [Print Queue].
6. Press [Print] Button to start printing.
1
2
3 4
5
6

 About CardDesiree
Installing Software
You may install HiTi CardDesiree into your PC by following steps.
1. Insert “Driver CD” into CD-ROM drive, if disk doesn’t auto start, execute
file “autorun.exe” in the disk.
2. Select “Install HiTi CardDesiree” and install.
3. Select language and destination then press button “Start” for
installation.

 About CardDesiree
User Interface
You may understand HiTi CardDesiree’s user interface from following
instruction.
Template Window
Image Explorer :
Load and explore image files.
Image Preview :
Select printer, printout format
and preview images.
Dynamic Editor :
Edit dynamic text and barcode
objects.
Function Button :
Watermark, printing and
template function buttons.
2
3
Image Processing Tool
1

 About CardDesiree
User Interface
You may understand text function of Template Editor from following
instruction.
Notice!!
Dynamic means content in this text object could be changed by user, Static
means content in this text object is fixed, user CAN NOT change text
content.
Dynamic/StaticPreview Window
Object Tools :
A
dd background, image, text or
barcode in template.
Text Tools :
Set font type, size,
color and content.
4 5
6

 About CardDesiree
User Interface
You may understand barcode function of Template Editor from following
instruction.
Notice!!
Dynamic means content in this barcode object could be changed by user,
Static means content in this barcode object is fixed, user CAN NOT change
barcode content.
Dynamic/StaticPreview Window
Object Tools :
A
dd background, image, text or
barcode in template.
Barcode Tools :
Set barcode size and content.
7
8

 About CardDesiree
User Interface
You may see all buttons in CardDesiree from following instruction.
1. Image Processing Tools 2. Load Image Tools
3. Function Tools 4. Object Tools
5. Text Tools
1. Adjust brightness & contrast
2. Adjust hue & saturation
3. Adjust color balance
4. Fit image to width
5. Fit image to height
6. Fit image size
7. Clip image
1. Image from computer
2. Image from printer
3. Image from scanner
1. Watermark function
2. Print this page
3. Template function
1. Background image
2. Set ID image location
3. Add text object
4. Add barcode object
1. Key in text content
2. Select font type
3. Set text color
4. Set text opacity
5. Set background opacity
6. Set text object name

 About CardDesiree
User Interface
6. Dynamic/Static Tools
7. Barcode Tools
8. Save Tools
1. Set object “Dynamic”
2. Set object “Static”
1. Key in barcode content
2. Set barcode size
1. Set text size
3. Set barcode object name
2. Save template
3. Confirm template modification
4. Cancel template modification

 About CardDesiree
Design Your Template
You may design your first template by following steps.
1. Press [Template] button and enter template editing window.
2. Load an image as
template background.