HME EOS HD User instructions

Setting Up and Scheduling Reminder Messages on Your EOS | HD® Base Station
© 2020 HM Electronics, Inc. The HME logo and product names are trademarks or registered trademarks of HM Electronics, Inc. All rights reserved.
• To set up the time-periods and locations for Reminder Messages to be played, or to name and /or record
Reminder Messages, press the Menu button on the Base Station LANE STATUS display and then, on the
MAIN MENU, press the Message Center button.
• Press the Reminder Messages button on the MESSAGE CENTER MENU.
• To select a message on the REMINDER MESSAGES display, press the (up) or (down) button to scroll
up or down to highlight the desired message. To edit the highlighted message, press the Edit button.
• To turn the selected message on or o, press the Message button on the EDIT REMINDER MESSAGE
display to highlight either (on) or –(o).
• Press the Back button located below the screen of the Base Station to save this setting.
• To choose the schedule for the selected message, press the Schedule button on the EDIT REMINDER
MESSAGE display.
• On the SCHEDULE REMINDER MESSAGE display, press the button for the day you want the selected
message to be played.
• On the SELECT SCHEDULE TIMES display, select the time period(s) when you want the selected
message to play by pressing the (up) and (down) buttons to scroll through the 12 available
time periods. When the desired time period is highlighted, press the Edit button.
1 of 2
Turn Message On/O
Message Schedule

Setting Up and Scheduling Reminder Messages on Your EOS | HD® Base Station
• On the EDIT display, press the Scheduled button to turn the message (on) or –(o) for the selected
time period. If you want the message to be on or o during this time period every day, press the Apply to
all days? button to select Ye s . If No is selected, only the selected day will be aected.
• Press the Back button located below the screen of the Base Station.

• To choose where the selected Reminder Message will be heard, press the Settings button on the EDIT
REMINDER MESSAGE display, and then press the Headsets button on the EDIT REMINDER SETTINGS
display.
• In multiple-lane operations, Reminder Messages can be set to play in the ceiling speaker and Line Out
for Lane 1, Lane 2, or both Lanes 1 and 2.
To do this, press the Settings button on the EDIT REMINDER MESSAGE display and the, on the EDIT
REMINDER SETTINGS display, press the Hear in ceiling speaker and Hear in Line Out buttons to
highlight Lane 1, Lane 2 or Lane 1 and 2.
• To turn the message on or o in the selected headset, press the Select headset button on the EDIT
display to select (on) or –(o). To turn the message on or o in all headsets, press the Apply to all
headsets? button to select Yes or No.
• Press the Back button below the screen of the Base Station to save this setting.
NOTE: By default, Reminder Messages play to all headsets.
• To have the Reminder Message play repeatedly at selected intervals, press the Repeat button on the EDIT
REMINDER SETTINGS display.
On the REPEAT INTERVAL display, use the orbutton to move the highlight left or right in the Time
eld for hours, minutes or seconds (HH:MM:SS), and use the + and −buttons to change the number in the
highlighted box. Setting the repeat interval to all 0’s disables repeats.
NOTE: Consider setting a Wash Hand Reminder Message at a REPEAT INTERVAL of 30 minutes.
• Press the Back button located below the screen of the Base Station to save this setting.
© 2020 HM Electronics, Inc. The HME logo and product names are trademarks or registered trademarks of HM Electronics, Inc. All rights reserved.
2 of 2
Turn Message On/O
For help, contact HME Support at 800.848.4468 or [email protected].
HME Training Portal
Find videos, supporting documents and other training guides.
www.hme.com/training