Hobby King Aether 3700 EP User manual

SPECIFICATIONS：
WingSpan: 3715mm/146.26in
Wing Area: 96.55Sqdm/1496.5Sqin
Weight: 2300g less battery
Fuselage Length 1861.5mm/73.29in
RECOMMENDED EQUIPMENT：
Motor: Jeti Phasor 2014G
Battery: 4S/5S 3300mah-5000mah
ESC: 60A~80A
Radio: 5 channels 6servos
Warning! This model is not a toy.
It is designed for maximum performance. Please seek advice if
one us not familiar
With this kind of engine powered precision model. Operating this
model without
Prior preparation may cause injuries .Remember, safety is the
most important thing. Always keep this instruction manual at hand
for quick reference.

1. Wing Part
Wing Part List Apply instant glue to fix the flap’s hinge
Apply epoxy glue to fix the stringy tube Apply instant glue to fix the aileron’s hinge
Cut the covering away for installing flap’s
servos Cut a hole to passing the servo’s extend
line

Cut the covering away for installing
aileron’s servos Pass through the aileron’s servos extend line
Apply epoxy glue to bond the aileron’s
servo installing wood Fixed the aileron’s servos
Fixed the servo mounting plate Fixed the aileron’s horn

Completed the aileron’s servos installing
and install the flap’s servos like this way Scuffed the wing latchplate with sand paper to ensuring a good glue bond
Apply epoxy glue to fix the wing latchplate
and wing tube Passed the aileron’s servos extend line through the middle wing
Apply epoxy glue to bond the middle wing
and the second wing

2. Stabilizer/Vertical
Stabilizer/Vertical Part List Apply epoxy glue to bond the stabilizer’s
installing mounting
Apply instant glue to fix the elevator’s
hinge Installed the elevator’s servo
Fixed the stabilizer Fixed the elevator’s horn

Completed the elevator’s servo installing Cut the covering away for installing the
rudder’s servo
Apply instant glue to fix the hinge Cut the covering away for installing the
rudder’s servo
Apply epoxy glue to bond the servo
installing wood Installed the rudder’s servo

Fixed the servo mounting plate Fixed the rudder’s horn
Complete the rudder’s servo installing Installed the rudder
Apply epoxy glue to bond the fuselage and
carbon fibre tube Installed the main wings

Installed the canopy