HOLLY&MARTIN HO730300TX User manual

PO#:
Page 1
HO730300TX
Hobbs Desk
Assembly Instructions
Holly & Martin® a valued brand of SEI
Customer Service 1-800-633-5096
[email protected]
www.hollyandmartin.com

1) Quantity
of 1
Top Panel
2) Quantity
of 1
Left Side Panel
3) Quantity
of 1
Right Side Panel
4) Quantity
of 1
Left Middle Panel
5) Quantity
of 1
Right Middle Panel
6) Quantity
of 2
Cross Panel
7) Quantity
of 1
Back Panel
8) Quantity
of 1
Left Side Frame
9) Quantity
of 1
Right Side Frame
10 ) Quantity
of 1
Back Cross Panel
11 ) Quantity
of 2
Drawer Front Panel
12 ) Quantity
of 2
Drawer Left Side Panel
Page 2
Hobbs Desk
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or a blanket. Check that you have all parts indicated. Call customer service if any hardware is
missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the
pictures. Using the incorrect hardware will cause damage.

13) Quantity
of 2
Drawer Right Side Panel
14) Quantity
of 2
Drawer Back Panel
15) Quantity
of 2
Drawer Bottom Panel
A) Quantity
of 19
Cam Bolt
B) Quantity
of 19
Cam Lock
C) Quantity
of 24
Wood Dowel
Dia. 5/16” x1-1/4”
D) Quantity
o f 12
Bolt Dia. 1/4x2” L
E) Quantity
o f 1
Allen Wrench
F) Quantity
o f 2
Bolt Dia. 1/4x1-1/4” L
G) Quantity
of 16
Screw
Dia. 5/32”x 1L
H) Quantity
of 12
Wood Cap
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Page 2
Assembly Tool Required
No.2 Phillips Screwdriver
(Not Included)

Please do not overtighten cam locks. Stop when they feel
secure.
Figure 1
Insert Cam Locks (B) into corresponding
holes on Cross Panel (6).
Screw Cam Bolts (A) into threaded holes
on Side Panels (2/3) and Middle Panels
(4/5).
Attach Side Panels (2/3) and Middle
Panels (4/5) to Cross Panel (6) by
inserting Cam Bolts (A) and Wood
Dowels (C) into corresponding holes
until all panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver (not included).
Figure 2
Insert Cam Locks (B) into corresponding
holes on pre-assembled unit from Figure
1.
Screw Cam Bolts (A) into threaded holes
on Back Panel (7).
Attach Back Panel (7) to pre-assembled
unit from figure 1 by inserting Cam Bolts
(A) and Wood Dowels (C) into
corresponding holes until all panels
meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver (not included).
Hobbs Desk
Assembly Instructions

Page 5
Figure 3
Insert Cam Locks (B) into corresponding
holes on pre-assembled unit from Figure
2.
Screw Cam Bolts (A) into threaded holes
on Top Panel (1).
Attach Top Panel (1) to pre-assembled
unit from Figure 2 by inserting Cam Bolts
(A) and Wood Dowels (C) into
corresponding holes until all panels
meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver (not included).
Figure 4
Attach the Side Frames (8/9) to
pre-assembled unit from Figure 3 and
Back Cross Panel (10) with Bolts (D/F).
Tighten bolts with Allen Wrench (E).

Page 6
Figure 5
Attach Drawer Side Panels (12/13) to
Drawer Back Panel (14) using Screws
(G).
Insert Drawer Bottom Panel (15) into
grooves of Panels (12/13/14).
Attach Drawer Front Panel (11) to
assembled unit using Screws (G).
Tighten Bolts and Screws with Phillips
screwdriver.
Figure 6
Insert drawer into assembled unit.
Make sure drawer slides glide smoothly
in and out.
Note: There is a lever located on male
slide for bottom drawer slide. Push
lever to either side in order to detach
male slide from female slide.
Cover holes on legs with Wood Plugs
(H).

Page 7
Figure 7
Now your Hobbs Desk is ready to use.

Page 8
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90
days of your receipt of the product. Replacement, if available, will be honored within this time frame.Parts will not be available for items
arriving fully assembled. We do not recommend modifying product(s) and we are not responsible for any damages due to product
modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or
replacement merchandise.
For product issues, please contact Southern Enterprises at 800-633-5096 (toll-free) / 972-869-0111 (Dallas) Mon-Fri 9am – 4pm CST, or
email us at [email protected]. Please ask for customer service representative for issues involving damages or replacement parts.
Please ask for technical assistance representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Parts Replacement Form
Customer Service 1-800-633-5096
[e-mail]
www.hollyandmartin.com
600 Freeport Parkway, Suite 200
Coppell, Texas 75019