HOLLY&MARTIN 3pc Ottico Table Set OC983000TX User manual

OC983000TX
3pc Ottico Table Set
Assembly Instruction
Holly & Martin® a valued brand of SEI
Customer Service 1-800-633-5096
[email protected]
www.hollyandmartin.com

OC983000TX
3pc Ottico Table Set
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Using a screw that is too long will
cause damage. Carefully study the diagrams below.
You may receive extra hardware with your unit.
A Quantity
Of 3pcs
Top panel
B Quantity
of 3pcs
Side panel left
C Quantity
of 3pcs
Side panel right
D Quantity
Of 3pcs
Bottom panel
E Quantity
of 6pcs
Right leg
F Quantity
of 6pcs
Left leg
G Quantity
Of 3pcs
Back panel
1 Quantity
Of 36pcs
bolt:
∮ 1/4”x2”
2 Quantity
Of 36pcs
T-nut
3 Quantity
Of 24pcs
Cam-lock
(1 black, 1 gray, 1 white)
(1 black, 1 gray, 1 white) (1 black, 1 gray, 1 white)
(1 black, 1 gray, 1 white)
(1 black, 1 gray, 1 white)

4 Quantity
Of 24pcs
Cam-Bolt
5 Quantity
Of 1pc
Allen wrench
6 Quantity
Of 12 pcs
Wood dowel
7 Quantity
Of 36pcs
PVC cover for body
8 Quantity
Of 36 pcs
PVC cover for leg
Care and Cleaning Instructions:
Before using wipe with a clean dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Please call manufacturer for assistance,
questions or parts.
Assembly Tool Required
No.2 Phillips Screwdriver

OC983000TX
3pc Ottico Table Set
Assembly Instructions
Figure 1
Unpack and lay parts on
clean padded surface like
carpet or blanket. Check
that you have all parts
indicated on the front page
Insert cam locks (3) into
predrilled holes on inside side
panel left (B) and inside side
panel right (C). Screw cam bolt
(4) into pre-drilled holes on
bottom panel (D). Attach side
panel left (B) and side panel
right (C) to bottom panel (D)
by inserting wood dowel (6) &
cam bolt (4) into corresponding
pre-drilled holes until bottom
panel (D) &side panel left (B)
and side panel right (C) meet.
Tighten by rotating cam lock (3)
clockwise with Phillips
screwdriver (not included).
Then attached PVC cover
(7) on the cam-locks holes
as shown.
Figure 2
Insert back panel (G) into
groove on side frame left
(B) and side frame right (C)
and bottom panel (D).
(2)
(1)
"Please do not over tighten cambolts. Please stop
when you feel tight"
BC
3
4
6
7
BC
D
G

Figure 3
Insert cam locks (3) into
predrilled holes on
pre-assembled unit on figure 2.
Screw cam bolt (4) into
pre-drilled holes on top panel
(A). Attach top panel (A) to
pre-assembled on figure 2
by inserting wood dowel(6)&
cam bolt (4) into corresponding
pre-drilled holes until top panel
(A) &pre-assembled unit on
figure 2 meet.
Tighten by rotating cam lock (3)
clockwise with Phillips
screwdriver (not included).
Then Attached PVC cover
(7) on the cam-locks holes
as shown.
Figure 4
Insert T-nut (2 ) into bottom
(D), then attach right leg (E) &
left leg (F) to the bottom of
pre-assembled on figure 3
using T-nut (2 ) & bolt (1),
Tighten bolts with Allen wrench
(5)
Attach PVC cover for leg (8)
on bolt holes on leg as
shown.
A
BC
4
3
7
E
E
F
F
1
1
1
5
8
8
8
2
2
7

Figure 5
Repeat step 1 to 4
to assemble the other two
bookcases.
Use black PVC cover (7) to
cover holes on black unit.
Use white PVC cover (7) to
cover holed on white unit,
And use gray PVC cover (7) to
cover holes on gray unit,
Figure 6
Stack the three bookcases by
hand as shown.
Figure 7
Now you 3pc Ottico Table Set
is ready to use.
Each Top panel support up
to 25 lbs
Each open interior support
up to 25 lbs
Black White Gray

Parts Replacement Form
Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If
damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at serv[email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service
1-800-633-5096
[email protected]
www.hollyandmartin.com
600 Freeport Parkway, Suite 200
Coppe
ll
, Texas
75019