HOLLY&MARTIN BC060100TX User manual

PO:
BC060100TX
Brock Storage Bench
Assembly Instructions
Holly & Martin®, a valued brand of SEI
Customer Service 1-800-633-5096
[email protected]
www.hollyandmartin.com

A Quantity
of 22
Wood Dowel
B Quantity
of 12
Cam Bolt
C Quantity
of 12
Cam Lock
D Quantity
of 4
Screw
∅
1/8"x1-1/4” L
E Quantity
of14
Screw
∅
1/8"x1/2” L
F Quantity
of 4
Small Bolt
∅
5/32"x3/4” L
G Quantity
of 2
Handle
H Quantity
of 16
Machine Screw
∅
1/8"x7/8” L
I Quantity
of 28
Bolt
∅
1/4"x1-1/4” L
J Quantity
of 28
Spring Washer
Brock Storage Bench
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or a blanket. Check that you have all parts indicated. Call customer service if any hardware is
missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the
pictures. Using the incorrect hardware will cause damage.

K Quantity
of 28
Flat Washer
L Quantity
of 1
Allen Wrench
M Quantity
of 28
Sticker cover
1. Quantity
of 1
Left Side Frame
2. Quantity
of 1
Left Back Frame
3. Quantity
of 1
Middle Frame
4. Quantity
of 1
Right Back Frame
5. Quantity
of 1
Right Side Frame
6. Quantity
of 1
Left Front Frame
7. Quantity
of 1
Right Front Frame
8. Quantity
of 2
Bar
9. Quantity
of 1
Cushion
10. Quantity
of 1
Left Side Panel
11. Quantity
of 1
Right Side Panel
12. Quantity
of 1
Fixed Shelf

13. Quantity
of 1
Top Panel
14. Quantity
of 1
Botto Panel
15. Quantity
of 1
Back Panel
16. Quantity
of 1
S all Drawer Face
17. Quantity
of 1
Drawer Right Wall
18. Quantity
of 1
Drawer Back Wall
19. Quantity
of 1
Drawer Left Wall
20. Quantity
of 1
Large Drawer Face
21. Quantity
of 1
Drawer Right Wall
22. Quantity
of 1
Drawer Back Wall
23. Quantity
of 1
Drawer Left Wall
24. Quantity
of 2
Drawer Botto Panel
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth. Avoid
rubbing or scratching the surface with rough or
abrasive objects.
For replacement parts or questions, please call SEI
customer service at 1-800-633-5096.
Assembly Tool Required:
No.2 Phillips Screwdriver (Not Included)

Figure 1
Attach Left Back Frame (2) to Right
Back Frame (4) using Bolts (I),
Spring Washers (J), and Flat
Washers (K).
Tighten Bolts (I) with Allen Wrench
(L).
Attach Left Front Frame (6) to Right
Front Frame (7) using Bolts (I),
Spring Washers (J), and Flat
Washers (K).
Tighten Bolts (I) with Allen Wrench
(L).
Cover all bolt holes with Sticker
Covers (M) .
Brock Storage Bench
Assembly Instructions

Figure 2
Figure 3
Attach assembled unit from Figure 1
to Left Side Frame (1), Middle
Frame (3),and Right Side Frame (5)
using Bolts (I), Spring Washers (J),
and Flat Washers (K).
Tighten Bolts (I) with Allen Wrench
(L).
Cover all bolt holes with Sticker
Covers (M) .
Attach Bars (8) to Left Back Frame
(2) and Left Front Frame (6) by
inserting Wood Dowels (A).
Attach assembled unit from Figure 2
to Left Side Frame (1),Middle
Frame (3),and Right Side Frame (5)
using Bolts (I), Spring Washers (J),
and Flat Washers (K).
Tighten Bolts (I) with Allen Wrench
(L).
Secure assembled Left Back Frame
(2) and Right Back Frame (4) to Left
Side Frame (1) and Right Side
Frame (5) using Bolts (I), Spring
Washers (J), and Flat Washers (K).
Tighten Bolts (I) with
Allen Wrench
(L).
Cover all bolt holes with Sticker
Covers (M) .
☺





Figure 4
Insert Cam Locks (C) into holes on
Fixed Shelf (12).
Screw Cam Bolts (B) into holes on
Left Side Panel (10) and Right Side
Panel (11).
Attach Left Side Panel (10) and
Right Side Panel (11) to Fixed Shelf
(12) by inserting Wood Dowels (A)
and Cam Bolts (B into
corresponding holes until all panels
meet.
Tighten by rotating Cam Locks (C)
clockwise with Phillips screwdriver
(not included).

Figure 5
Figure 6
Insert Cam Locks (C) into holes on
Left Side Panel (10) and Right Side
Panel (11).
Screw Cam Bolts (B) into holes on
Bottom Panel (14).
Attach Left Side Panel (10) and
Right Side Panel (11) to Bottom
Panel (14) by inserting Wood
Dowels (A) and Cam Bolts (B) into
corresponding holes until all panels
meet.
Tighten by rotating Cam Locks (C)
clockwise with Phillips screwdriver
(not included).
Repeat this process with Top Panel
(13).
Tighten by rotating Cam Locks (C)
clockwise with Phillips screwdrive r
(not included).
Attach Back Panel (15) to
assembled unit from Figure 5 with
Screws (E).
Tighten Screws (E) with Phillips
screwdriver (not included).



Figure 7
Figure 8
Attach assembled unit from Figure 6
to assembled unit from Figure 3 by
inserting Wood Dowels (A),Bolts (I),
Spring Washers (J), and Flat
Washers (K).
Tighten Bolts (I) with Allen Wrench
(L).
Cover bolt holes with Sticker Covers
(M).
Attach Cushion (9) to assembled
unit from Figure 7 with Screws (D).
Tighten Screws (D) with Phillips
screwdriver (not included).


Figure 9
Figure 10
Attach Drawer Right Wall (17) and
Drawer Left Wall (19) to Drawer
Back Wall (18) with Machine Screws
(H).
Tighten Machine Screws (H) with
Phillips screwdriver (not included).
Slide Drawer Bottom Panel (24) into
the grooves of Drawer Panels.
Attach Small Drawer Face (16) to
Drawer Right Wall (17), Drawer Left
Wall (19) and Drawer Bottom Panel
(24) with Machine Screws (H).
Tighten Machine Screws (H) with
Phillips screwdriver (not included).
Attach Handle (G) to Small Drawer
Face (16) with Small Bolt (F).
Tighten Small Bolts (F) with Phillips
Screwdriver (not included).
Attach Drawer Right Wall (21) and
Drawer Left Wall (23) to Drawer
Back Wall (22) with Machine Screws
(H).
Tighten Machine Screws (H) with
Phillips screwdriver (not included).
Slide Drawer Bottom Panel (24) into
the grooves of Drawer Panels.
Attach Large Drawer Face (20) to
Drawer Right Wall (21), Drawer Left
Wall (23) and Drawer Bottom Panel
(24) with Machine Screws (H).
Tighten Machine Screws (H) with
Phillips screwdriver (not included).
Attach Handle (G) to Large Drawer
Face (20) with Small Bolts (F).
Tighten Small Bolts (F) with Phillips
Screwdriver (not included).


Figure 11
Figure 12
Attach assembled drawers into
assembled unit. Make sure drawers
smoothly slide in and out.
Now your Brock Storage Bench is
ready to use.

Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s).If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at [e-mail]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Custo er Infor ation
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[e-mail]
www.hollyandmartin.com
600Freeport Parkway, Suite 200
Coppell, Texas 75019