HOLLY&MARTIN DN744000TX User manual

DN744000TX
Driness Drop Leaf Table
ASSEMBLY INSTRUCTIONS
Holly & Martin® a valued brand of SEI
Customer Service 1-800-633-5096
[email protected]
www.hollyandmartin.com

DN744000TX Driness Drop Leaf Table
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware.
Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
Screw diagrams below. ou may receive extra hardware with your unit.
A Quantity
Of 5
Long bolt (M6*50mm)
B Quantity
Of 1
Allen wrench
C Quantity
of 4
glass holder(φ10*18*M6)
D Quantity
Of 11
screw (φ3.5*15mm)
E Quantity
Of 8
Adjustable leveler (φ33*M8)
Quantity
Of 16
short bolt (M6*45mm)
1 Quantity
Of 1
Middle Top panel
2 Quantity
Of 1
Side Top panel
3 Quantity
Of 1
Top metal frame
4 Quantity
of 1
BOTTOM METAL FRAME
5 Quantity
of 2
leg frame 1
6 Quantity
of 2
leg frame 2
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800-633-5096
Please call manufacturer for assistance, questions
or Parts.
Assembly Tool Required
No.2 Phillips Screwdriver (Not Included)

DN744000TX Driness Drop Leaf Table
Assembly Instructions
igure 1
Unpack and lay parts on
clean, padded surface like
carpet or blanket. Check that
you have all parts indicated
on the front page.
Attach top metal frame (3) to
leg frame 1 (5) & leg frame 2
(6) using short bolt (F) as
shown.
Tighten short bolt (F) with
Allen wrench (B).
igure 2
Turn over unit in figure 1
Attach bottom metal frame
(4) to leg frame 1(5) & leg
frame 2 (6) using short bolt
(F) as shown.
Tighten short bolt (F) with
Allen wrench (B).

igure
3
Attached side top panel (2) to
middle top panel (1) using
screw (D), Tighten screw (D)
using Phillips screwdriver
(not included).
.
igure 4
Connect pre-assembled unit
in Figure 2 and
pre-assembled unit Figure 3
by inserting long bolt (A) into
the five holes of top metal
frame(3) as shown.
Tighten long bolt (A) with
Allen wrench (B).
4
3

igure5
Insert pin stopper (C) into
holes on back of top panel
(1). (These pins function as a
stopper when top panel is in
folded position.)
igure 6
Screw adjustable leveler (E)
into the bottom of the table
leg.
(Please adjust each stopper
so that the table is stable)
3
4

igure 7
.
With an assistant, turn the table
upright.
Now you can enjoy your new
dining table.
igure 8
Converting to a console
Please carefully fold both
sides of leg frames first
before folding down the
two (top) side panels.
Close leg frame
by hand

Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at [e-mail]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[e-mail]
www.hollyandmartin.com
600 Freeport Parkway, Suite 200
Coppell, Texas 75019