HOLLY&MARTIN HZ881000TX User manual

HZ881000TX Zephs Bar Cart
Gun Metal & Black Glass
HZ881800TX Zephs Bar Cart
White & Grey Glass
ASSEMB Y INSTRUCTION
Holly & Martin® a valued brand of SEI
Customer Service 1-800-633-5096
[email protected]
www.hollyandmartin.com

A.
Quantity
of 2
Top/Bottom glass
B.
Quantity
of 1
Shelf glass
C.
Quantity
of 1
Shelf glass
D.
Quantity
of 1
Top frame
E.
Quantity
of 1
eft leg
F.
Quantity
of 1
Right leg
G.
Quantity
of 2
Bottom rail
H.
Quantity
of 1
Front middle rail
I.
Quantity
of 1
Back middle rail
J.
Quantity
of 1
Upper middle rail
K.
Quantity
of 1
ower middle rail
.
Quantity
of 1
Stemware rack
Zephs Bar Cart
Parts list
Please review all parts and hardware before disposing of any packaging.
Call Customer ervice if missing any hardware. Using a screw that is too long will
cause damage. Before beginning assembly, separate each type of screw. Carefully
study the diagrams below. You may receive extra hardware with your unit.
Page 2

M.
Qua
ntity
of 1
Wine holder back frame
N.
Quantity
of 1
Wine holder front frame
1.
Quantity
of 2
Caster with lock
2.
Quantity
of 2
Caster without lock
3.
Quantity
of 46
Bolt :¢1/4”x5/8”
4.
Quantity
of 24
Glass pad
5.
Quantity
of 1
Allen wrench
6.
Quantity
of 1
Crescent wrench
7.
Quantity
of 32
Flat washer
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Avoid rubbing or scratching the surface with rough or
abrasive objects.
Call SEI customer service at 1-800-633-5096 for
assistance, questions, or parts.
Page 3

Figure 1
Unpack and lay parts on clean,
padded surface like carpet or
blanket. Check that you have all
parts indicated on the front
page
Attach front middle rail (H) to
upper middle rail (J) & lower
middle rail (K) using bolts (3)
and flat washers (7).
Tighten bolts using Allen
wrench (5).
Repeat above steps to attach
back middle rail (I) to upper
middle rail (J) & lower middle
rail (K).
Figure 2
Attach pre-assembled unit from
Figure 1 to left leg (E) using
bolts (3) & flat washers (7).
Attach bottom rails (G) to left
leg by using bolts (3) & flat
washers (7).
Tighten all bolts using Allen
wrench (5).
Page 4
HZ881800TX Zephs Bar Cart
Assembly Instructions

Figure 3
Attach right leg (F) to bottom
rail (G) and pre-assembled
unit from Figure 2 using bolts
(3 ) & flat washers (7).
Tighten all bolts using Allen
wrench (5).
Figure 4
Attach Wine holder back
frame (M) and wine holder
front frame (N) to
pre-assembled unit from
Figure 3 using bolta (3).
Tighten bolts (3) using Allen
wrench (5).
Attach casters with locks (1)
& casters without locks (2) to
the bottom of pre-assembled
unit from Figure 3.
Tighten casters with crescent
wrench (6).
Page 5

Figure 5
A
ttach top frame (
D
) to
pre-assembled unit from
Figure 4 using bolts (3) & flat
washers (7).
Tighten all bolts using Allen
wrench (5).
Figure 6
Attach stemware rack ( ) to
pre-assembled unit from
Figure 5 using bolts (3).
Tighten bolts using Allen
wrench (5).
Page 6

Figure 7
Insert and push glass pads
(4) into top frame and shelf
frames by hand.
Figure 8
Put top/bottom glasses (A) &
shelf glasses (B/C) into
pre-assembled from Figure 7.
Now your Zephs Bar Cart is
ready to use.
Each shelf supports up to
40 lbs.
Each wine bottle holder
supports up to 5 lbs.
Page 7

Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at [e-mail]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/ tate/Zip Code
Phone Number
Please indicate where you purchased this item: tore/Website/Catalog
Please indicate color/size/style number:
tyle No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Holly & Martin® a valued brand of SEI
Customer Service 1-800-633-5096
[email protected]
www.hollyandmartin.com