
5 of 8
Misting System Connection
Connect up the black poly pipe⑩using the
elbow⑬ and joiners⑫ to fit around the frame.
Trim the last piece of poly pipe as needed and
place the end cap⑭ onto the top end of the
poly pipe and the snap-on connector⑯to
the bottom end as shown below. Attach your
garden hose to the snap-on connector.
Attach the poly pipe along the width of the top central
beam and adjoining vertical corner poles with clips⑪.
To insert the sprayers⑮, punch six holes along the top
length of poly pipe with the supplied punch⑰. Twist
the yellow end of the sprays into the punched holes.
Assembly (continued)
10
12
10
10
1010
14
13
13
15
12
11
11
16
11 11
11 11
11 11
11 11
to Garden Hose
11
11
17
11
13
16