HOMCOM 800-105 Installation guide

ASSEMBLY & INSTRUCTION MANUAL
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
INcsb050V01_UK
INcsb050_UK_800-105

1
TABLE OF CONTENTS
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Unpacking Instrucons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Features and Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Operang Instrucons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7
Helpful Reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Blender Cleaning and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

2
IMPORTANT SAFEGUARDS
When using this or any other electrical appliance, always follow these basic safety
precautions:
ŸRead All Instrucons Before Using This blender
ŸTo protect against risk of electrical shock do not put cord, plug, or base in water or other
liquid.
ŸThis appliance is not intended for use by persons (including children) with reduced
physical,sensory, or mental capabilies, or lack of experience and knowledge, unless
they are closely supervised and instructed concerning use of the appliance by a person
responsible for their safety.Close supervision is necessary when any appliance is used by
or near children. Children should be supervised to ensure that they do not play with the
appliance.
ŸAvoid contacng moving parts.
ŸDo not operate any appliance with a damaged cord or plug or aer the appliance
malfuncons, or is dropped or damaged in any manner. Contact the manufacturer at
their customer service telephone number for informaon on examinaon, repair, or
adjustment。
ŸThe use of aachments, including canning jars, not recommended by the manufacturer
may cause a risk of injury to persons
ŸDo not use outdoors
ŸDo not let cord hang over edge of table or counter
ŸKeep hands and utensils away from moving blades while processing food to reduce the
risk of severe injury to persons or damage to the Blender. A scraper may be used but
must be used only when the blender is not running.
ŸBlades are sharp. Handle carefully.
ŸTo reduce the risk of injury, never place cuer-assembly blades on base without jar
properly aached.
ŸAlways operate blender with cover in place.
ŸBe certain cover is securely locked in place before operang appliance.
ŸDo not aempt to defeat the cover interlock mechanism.
ŸTurn the appliance OFF, then unplug from the outlet when not in use, before assembling
or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the
outlet. Never pull from the power cord.
ŸIf the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
ŸCare shall be taken when handling the sharp cung blade, emptying the bowl and during
cleaning.
ŸAlways disconnect the appliance from the supply if it is le unaended and before
assembling, disassembling or cleaning.
ŸThis appliance shall not be used by children. Keep the appliance and its cord out of
children.
ŸAppliances can be used by persons with reduced physical, sensory or mental capabilies
or lack of experience and knowledge if they have been given supervision or instrucon
concerning use of the appliance in a safe way and if they understand the hazards
involved.
Ÿchildren shall not play with the appliance
ŸSwitch off the appliance and disconnect from supply before changing accessories
orapproaching parts that move in use.

3
TO RESET THE UNIT
Your blender is equipped with a Reseable Thermal Protector to protect the motor. If the
motor shuts down, unplug the blender. Let the blender rest for approximately 15 minutes.
Once the resng period has elapsed, plug the power cord back into the outlet and connue
blending. If your blender does not funcon properly following this procedure, disconnue
use and contact a cerfied Consumer Service Center
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
UNPACKING INSTRUCTIONS
1. Place the box containing blender on a flat, sturdy surface before unpacking.
2. Open box and remove instrucon book, Handbook cookbook, and any printed materials
from top of box.
3. Remove packing materials and all components. CAUTION: Sharp blade inside blender
container.
4. Place all packing materials back into the gi box and save, in the event that future
shipping of the machine is needed.
Measuring Cup
Cover
Glass
Tool apron
Main Housing
FEATURES AND COMPONENTS
FIG 1

4
Mechanical gear
1.Unscrew the lid or tool apron. (FIG 2)
2.Portable cup -600ml,AS
3.The portable cup and gringing cup that holds the tool apron can be screwed into the
mainframe to make recipes
CONTROL PANEL
1. Take the measuring cup up.
2. Cover opening.
3. Glass -1500mL,BPA free Eastman Tritan, includes English and metric
calibration.
4. Blender base with high performance motor, and with metalring.
5.The glass with plasc handle needs to be screwed into the mainframe with the handle
facing the boom trigger link. There is a lock symbol next to it (FIG 1)
FIG 2 FIG 3 FIG 4

5
OPERATING INSTRUCTIONS：
Place the motor base on a flat, sturdy surface, it is so important that the surface is clean and
dry fit the jar on motor base, once assembled, plug the power cord into an electrical outlet
Add all necessary ingredients to jar and secure the cover; you may add more ingredients by
removing the measuring cup and dropping ingredients through the fill area, replace the
measuring cup aer adding any ingredient.
Do not put hands in jar with the blender plugged in, start blending
HELPFUL REMINDERS
Jar cover should always be secure while the unit is in operaon. Always use the blender on a
clean, sturdy and dry surface.
Insert the measuring cup into the cover.
Once the cover is in posion, addional ingredients can be added during blending by simply
removing the measuring cup insert, adding ingredients, and replacing it, turning it to
secure.
Do not place jar on base while motor is running or remove jar before the blender has
stopped running.
Do not aempt to blend boiling liquids
When blending, place liquid ingredients into the jar first, followed by the soest
ingredients. Ice or frozen fruit should be placed in the jar last.
Use a plasc spatula as needed, only when the blender is turned off. Never use metal
utensils, as damage may occur to the jar or blade.
Blending hard ingredients and spices may cause some clouding to appear on the inside of
the jar, but will not affect blender performance.
Use Ice crush and Cleaning program for maximum power to break up hard ingredients.
Do not exceed the MAX FILL LINE when adding food or liquid to the blending jar
Make sure the jar is completely dry when chopping ice, fresh herbs, garlic, onion, zest,
breadcrumbs or nuts and spices.
Do not store food or liquids in your jar.
Be careful not to over process foods.
Do not use any utensil inside the jar with the motor on.
Unplug blender before reaching into the jar.
Never use carbonated liquids in a jar. Using carbonated liquids in the blender may result in
Injury
Function file
1 is the lowest grade,5 is the highest grade.
PULSE: ice crush: need to beat the ice manually
RECIPE
Attachment Type load capacity Operating Time
Blender 1500ml Carrots and water 600g carrot+900g water 2 min
Blender 600ml Carrots and water 240g carrot+360g water 2 min
Grinding cup Coffee bean 50g 30S
Grinding cup beef with tendons 150g (25*25*25mm) 10S

6
BLENDER CLEANING AND MAINTENANCE
Always unplug the blender from the electrical outlet before cleaning. Never immerse
blender base in water or other liquids.
1. Remove the jar from the blender base and remove the cover. The jar must be cleaned and
dried aer each use or when the blender has not been used for an extended period of me.
We recommend using the automac clean funcon
2. Wash the cover in warm, soapy water and rinse thoroughly.
3. The jar, blade assembly and cover assembly are all dishwasher safe.
4. To clean the blender base, wipe the exterior with a so cloth or sponge dampened with
cleaning soluon. Do not immerse the base in cleaning soluon or water. Wipe with a dry
towel and be sure the base is completely dry before using.
5. be sure that the blender is thoroughly dry and properly assembled with the jar pad in
place before operang. An authorized service representave should perform any other
servicing.
Electrical Specifications
Model
Voltage
Frequency
Wattage
BL3437A 220-240 VAC 50-60 Hz 900 W
ENVIRONMENT FRIENDLY DISPOAL
You can help protect the environment!
Please remember to respect the local
regulations: hand in the non -working
electrical equipments to an appropriate
waste disposal centre.