Home Accents Holiday TY040-1611 User manual

USEAND CARE GUIDE
72IN 140L LED 1:5 TWINK WINDMILL
THANK YOU
We appreciate the trust and confidence you have placed in Home Accents through the purchase
of this 72IN 140L LED 1:5 TWINK WINDMILL. We strive to continually create quality products
designed to enhance your home. Visit us online to see our full line of products available for your
home improvement needs. Thank you for choosing Home Accents!
Guarantee
What is Covered
The product is intended for residential seasonal use for approximately 90 days per year. This
product is covered by a 90 day limited guarantee due to defects in material and workmanship.
Return the product with purchase receipt to the location of purchase for refund within 90 days
of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDs, batteries,
products that have been subjected to unauthorized repair and/or modification and damage caused
by shipping and improper handling, alterations, misuse or accidents. Questions, problems, missing
parts? Before returning to the store, call HomeAccents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
YOW SKU # 725 430
Model # TY040-1611
Pre-Assembly
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return to place of purchase with proof of
purchase receipt. Assembly of this product may require more than one person.
PACKAGE CONTENTS
Package Contents/Parts List
Part Description Quantity
A Fans 4
B Disk 1
C Top Of
Windmill 1
D Outer Frame 1
E Middle Of
Windmill 2
Package Contents/Parts List
Part Description Quantity
F Lower Of Windmill 2
G Ground Stakes 4
H Plastic Tie 10
I Spare Fuse 1
J Spare Bulb 4
A B
C
D
E
F
G H I J

Assembly
Assembling the Windmill
Step 1.Align the two halves of Lower Windmill (F) with each other. Stand the Lower Of Windmill( F)
section in an upright position. Insert the rods of Outer Frame(D)into the holes at the top of Lower
Windmill(F). (FIG.1)
Step 2.Align the two halves of the Middle Windmill (E) with each other . Insert the metal rods
attached to Middle Windmill (E) into the matching holes on the Outer Frame (D).(FIG.1)
Step 3.Insert the rods of Top Windmill(C) into the matching holes of Middle Windmill (E).Insert
the metal rods of Disk(B)into the holes of Top Windmill (C).(FIG.1)(FIG.1)
Step 4. Insert the metal rods on each of Fans (A) into the matching holes in the Disk (B).(FIG.2)
Step 5.Finally fixed with Plastic Tie (H). (FIG.3)
Step 6.Secure the Windmill to the ground by using the Ground Stakes (G).(FIG.3)
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 9.6 Watts
(0.08Amps). Do not overload. Do not connect to other lighting strings, decorative
outfit or other electrical products. Before you use or re-use this product inspect it
carefully. Return to Store or discard if the product has cuts, damage or frayed wire
insulation on cords, cracks in the socket enclosures, loose connections or exposed
copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product, wire and lighting connections. If the product
is placed somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
B C
E
D
F FIG. 1
FIG.2 FIG.3
A H
G