Home Accents Holiday TY443-1711-5 User manual

USE AND CARE GUIDE
8 Feet 6 Inch LED WHITE DEER with JINGLE BELL COLLAR
THANK YOU
We appreciate the trust and confidence you have placed in Home Accents through the purchase of this 8 Feet 6 Inch
LED WHITE DEER with JINGLE BELL COLLAR. We strive to continually create quality products designed to enhance
your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for
choosing Home Accents!
Guarantee
What is Covered
The product is intend for residential seasonal use for approximately 90 days per year. This product is covered by a 90
days limited guarantee due to defects in material and workmanship. Return the product with purchase receipts to the
location of purchase for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in accordance with directions
provided on or with the product, burn out of bulbs or LEDS, batteries, products that have been subjected to
unauthorized repair and/or modification and damage caused by shipping and improper handling, alterations, misuse or
accidents. Questions, problems, missing parts? Before returning to the store, call Home Accents Holiday Customer
Service 8 a.m.-6 p.m., EST, Monday-Friday
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
Pre-Assembly
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Read the entire manual prior to assembly
and identify all the parts included in the package against the parts list. If any parts are missing or damaged do not
attempt assembly. Contact our customer service center or return to place of purchase with proof of purchase receipt.
Assembly of this product may require more than one person.
PACKAGE CONTENTS
SKU # 1002 494 386
YOW SKU # 763 805
Model # TY443-1711-5
Package Contents/Parts List
Part Description Quantity
A Ear 2
B Antler 2
C Head & Neck 1
D Collar 1
E Halves of Body 2
F Front Leg 2
G Hind Leg 2
Package Contents/Parts List
Part Description Quantity
H Tail 1
I Bolt & Wing Nut 4
J Anchoring String 4
K " U " shape stake 8
L Plastic Ties 15
M Spare Fuse 2
N Spare Bulb 8
B
F
A
C
D
E
G
K N
M
L
I
J
H

Assembly
Assembling the Standing Deer
Step 1. Align the two halves of the Body (E) with each other then insert the metal connecting rods on one half into the
holes on the other half then fasten them with Plastic Ties (L). (FIG.1)
Step 2. Insert the metal connecting rods attached to the each Leg (G&F) into the matching holes on the underside of the
Body (E) then fasten the Legs to the Body with the Bolt & Wing Nut provided (I). (FIG.2)
Step 3. The Legs come with metal bars attached to stabilize the Deer. Insert the hooked end of the metal bars into the
metal hole on the opposite Leg. (FIG.3)
Step 4. Insert the connecting rods of Head & Neck (C) and Tail (H) into the matching holes on the Body (E) then fasten
with Plastic Ties (L). (FIG.4)
Step 5. Wrap the Collar (D) around the neck of the Deer. (FIG.5).
Step 6. Insert both Antlers and Ears (A & B) into the matching holes at the top of Head (C). Note: Ears go on the outside
holes. (FIG.6).
Step 7. Hook the plastic end of each of Anchoring Strings (J) into the securing loop on the top of the body. Put the " U "
Shape Stake (K) thru the free end of eachAnchoring String (J) then tightly secure to the ground evenly. (FIG.7).
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source. Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 19.2 Watts (0.16Amps). Do not overload.
Do not connect to other lighting strings, decorative outfit or other electrical products. Before you use or re-use this
product inspect it carefully. Return to place of purchase or consult a certified Electrician if the product has cuts, damage
or frayed wire insulation on cords, cracks in the socket enclosures, loose connections or exposed copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any undue strain or stress on the
product, wire and lighting connections. If the product is placed somewhere other than the ground it should be well
secured and stable.
b. Wipe the product with a damp cloth and allow the product to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
FIG.3 FIG.4
FIG.5 FIG.6 FIG.7
FIG.1 FIG.2