Home Decorators Collection KENTWELL PEWTER 082-4PC-Y User manual

THANK YOU
We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this patio set. We
strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for
your home improvement needs. Thank you for choosing Home Decorators Collection!
USE AND CARE GUIDE
Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m.- 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
Item #1007 497 021
Model #082-4PC-Y
KENTWELL PEWTER 4-PIECE ALUMINUM OUTDOOR PATIO
CUSHIONED DEEP SEATING SET WITH DRIFTWOOD ACRYLIC
SEAT AND BACK CUSHIONS

2
Table of Contents
READ ALL INFORMATION BEFORE USE
To reduce the risk of injury to persons :
□Close supervision is necessary when this furnishing is used by
or near children, or disabled persons, if applicable.
□Use this furnishing only for its intended use as described in
these instructions. Do not use attachments not recommended
by the manufacturer.
CAUTION : Read all of the information in this manual
before you begin assembly. Failure to do so may result in
faulty assembly and potential injury!
Warranty
5 YEAR FRAME AND FABRIC LIMITED WARRANTY
WHAT IS COVERED
We warrant the product to be free of manufacturing defects to the original purchaser for five years.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, freezing, or abusive use. In addition, purchased parts are not covered under this warranty. We
reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact Customer Care at 1-800-986-3460 or visit www.homedepot.com/homedecorators.
Table of Contents .................................2
Warranty ...................................... . . . 2
What is covered .............................. . . . . 2
What is not covered ........................... . . . . 2
Pre-Assembly .................................. . . . . 3
Planning Assembly ............................. . . . . 3
Hardware Included ............................. . . . . 3
Package Contents .......................... . . . . . . . .4
Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Care and Cleaning.. ........................... . . . . .10
Important Safety Instructions
Important Safety Instructions ........................2

3 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Pre-Assembly
NOTE: Hardware not shown to actual size.
_BB _CC
_AA _DD _EE
_FF _GG
_KK _LL _MM
Part Description Quantity
AA Bolt (M8*35) 25
BB Washer (D8) 25
CC Bolt cap (D8) 25
Bolt (M6*20) 20
DD
Part Description Quantity
HH Washer (D6) 18
Wrench (M6) 1
JJ Nut (D6) 8
II
EE Bolt cap (D6) 22
FF Hex wrench 1
Connecting plate 6
GG
KK Nut cap (D6) 8
Bolt (M6*10) 2
MM Wrench (M8) 1
LL
_HH _II _JJ
PLANNING ASSEMBLY
□Please read this entire instruction manual prior to assembly.
□Verify all parts packed in the carton against the parts list.
□Remove all protective materials and place the parts on a non-abrasive surface to avoid scratching.
□It will take two people about 30 minutes to complete the assembly process.
HARDWARE INCLUDED

4
Pre-Assembly
PACKAGE CONTENTS
BCD
A
F
I
H
EG
JK
Part Description Quantity
ARight leg 3
B3
C2
D2
Part Description Quantity
G4
HBack cushion 4
ITable leg 2
JTable connecting bar 1
Seat cushion
KTable top 1
E1
F1
Left leg
Seat panel of lounge chair
Back panel of lounge chair
Back panel of loveseat
Seat panel of loveseat

5
Assembly (Lounge chair)
1Attaching the seat panel to the left leg
□Place the left leg (B) on a flat, smooth surface.
□Align the seat panel of lounge chair (C) to the left leg (B), and attach them with the washers (BB) and the bolts (AA) using the
wrench (MM).
AA
BB
B
C
2Attaching the right leg to the seat panel
□Align the seat panel of lounge chair (C) to the right leg (A), and attach them with the washers (BB) and the bolts (AA)
using the wrench (MM).
AA
BB
A
C
IMPORTANT : For steps 1 to 3, don't fully tighten bolts
until the end of step 4.
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.

6
Assembly (Lounge chair)
Attaching the back panel to the seat
panel
3
AA
CC
BB
D
C
B
A
DEE
DD
GG
□Align the seat panel of lounge chair (C) to the back panel
of lounge chair (D), and attach them with the washers (BB)
and the bolts (AA) using the wrench (MM).
Placing cushions on the lounge chair
□Place the back cushion (H) and the seat cushion (G) on the lounge chair.
□Repeat these four steps for the other lounge chair.
H
G
4
5
Attaching the back panel to the chair
legs
□Align the back panel of lounge chair (D) to the right leg
(A) and the left leg (B), and attach them with the connecting
plates (GG) and the bolts (DD) using the hex wrench (FF).
□Fully tighten all the bolts (AA) and the bolts (DD), and cover
all the bolts (AA) with the bolt caps (CC), and cover all the
bolts (DD) with the bolt caps (EE).

7
Assembly (Loveseat)
1Attaching the seat panel to the left leg
□Place the left leg (B) on a flat, smooth surface.
□Align the seat panel of loveseat (E) to the left leg (B), and attach them with the washers (BB) and the bolts (AA) using the
wrench (MM).
2
□Align the seat panel of loveseat (E) to the right leg (A), and attach them with the washers (BB) and the bolts (AA) using the
wrench (MM).
IMPORTANT : For steps 1 to 3, don't fully tighten bolts
until the end of step 4.
AA
BB
E
B
AA
BB
Attaching the right leg to the seat panel
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
A
E

8
Assembly (Loveseat)
Attaching the back panel to the seat
panel
□Align the seat panel of loveseat (E) to the back panel of
loveseat (F), and attach them with the washers (BB) and
the bolts (AA) using the wrench (MM).
34
F
AA
CC
BB
E
EE
DD
GG
AB
F
Placing cushions on the loveseat
□Place the back cushions (H) and the seat cushions (G) on the loveseat.
H
G
5
Attaching the back panel to the chair
legs
□Align the back panel of loveseat (F) to the right leg (A)
and the left leg (B), and attach them with the connecting
plates (GG) and the bolts (DD) using the hex wrench (FF).
□Fully tighten all the bolts (AA) and the bolts (DD), and
cover all the bolts (AA) with the bolt caps (CC), and cover
all the bolts with the bolt caps (EE).

9
1Attaching the table connecting bar to
the table leg
□Place the table legs (I) on a flat, smooth surface.
□Align the table connecting bar (J) to the table legs (I), and
attach them with the washers (HH) and the bolts (LL) using
the hex wrench (FF).
2Attaching the table top to the table leg
□Align the table top (K) to the table legs (I), and attach them
with the washers (HH), the bolts (DD) and the nuts (JJ)
using the hex wrench (FF) and the wrench (II).
□Fully tighten all the bolts (LL), the bolts (DD) and the nuts
(JJ), and cover all the bolts (LL) and the bolts (DD) with the
bolt caps (EE), and cover all the nuts (JJ) with the nut caps
(KK).
3Leveling the table
□Turn the table upright.
□When necessary, level the table with foot glides at the bottom of table legs.
Assembly (Coffee table)
II
J
LL
HH
K
HH
JJ
DD
EE KK
HH
I
I
IMPORTANT : For steps 1 to 2, don't fully tighten bolts
until the end of step 2.
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
EE
LL

Care and Cleaning
s.
□Use a mild soap and water for normal cleaning. Do not use janitorial or alcohol based cleaners. Some cleaners may be marked as
natural, but some ingredients may cause discoloration or have an adverse reaction to your finish.
□Do not allow water to build up in the frames. This will cause corrosion and possible freezing damage in cold climate
□Rinse with clean water and dry with a soft, absorbent cloth towel.
r.□Treat the frames with a liquid wax for maximum protection against UV rays and / or salty, damp ai
10