Home Zone Security ES00931G User manual

10x15cm
Client: Amazon
IM
T101P61Z01
Client ID: Item NO.:
Division: File NO.:
Finish Date:
Contact: Art window/Reading ext:8237
Email: [e-mail]
Packaging Description:
Package Size:
PDS 540 File Information
Joe
Amy
Hunt
Carol
Packaging Design
Implement Confirmation
Sales Division
Applicant Designer
Design Division
Signed by Applicant & Sales Division
forall Items
20211218
Colors:
20211218
ES00935G10163406
CMYK
Cutter
Diecut
SMART AUTO CCT
TRIPLE HEAD
SECURITY FLOOD LIGHT
the bright way to do home security.
ES00931G
INSTALLATION INSTRUCTIONS
®

1. Turn off electrical power at fuse or circuit breaker box before wiring
fixture to the power supply.
2. Make sure all electrical and grounded connections are in accordance with
the National Electrical Code and applicable local code requirements.
3. All wiring connections should be compliant with UL standard.
1. Wear gloves and safety glasses at all times when moving luminaire from
carton, installing, servicing or performing maintenance.
2. Avoid direct eye exposure to the light source while it is on. Or this may
cause irreparable damage to the eyes.
3. Account for small parts and destroy packing material, as these may be
hazardous to children.
1. Allow fixture to cool before touch.
2. Do not exceed maximum wattage marked on luminaire label.
Attention: lights must to be installed by the experienced household wire
installer or a qualified electrician, Electrical system and
the electrical connection method of light fixture must conform to the
national electrical standards and specification
requirements of the local architecture.
PLEASE READ CAREFULLY AND SAVE THESE INSTRUCTIONS, AS YOU
MAY NEED THEM AT A LATER DATE.
Warning
1. Please read all warning and instruction labels which are included in the
box and fixture to avoid personal injury, property damage caused by fire,
cuts, bruises, death and other dangers.
2. Please follow these general precautions before installing, maintaining, or
fixing.
IMPORTANT SAFETY OPERATING INSTRUCTIONS
WARNING
WARNING:This product can expose you to chemicals including lead
and lead compounds, Di(2-ethylhexyl)phthalate (DEHP), which are
known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
Risk of Electrical Shock
Risk of Injury
Risk of Burn
1

Ref. Parts
Parameter
1Illumination output: approx. 3500 lumens
CCT: 3000K - 5000K
Wattage: 36W
Power source: AC120V/60Hz
Detection range: up to 70feet (21.3m), 240 degree
2
3
4
5
PREPARATION
Tools required for assembly (not included): phillips screwdriver, safety
goggles, power drill and ladder.
Small Mounting BoltLight fixture Decorative Cover
A B C
Mounting BracketMounting Plate #6-32 X 1/2”
Junction Box Screw
D E F x 2
Large Mounting Bolt
(pre-installed)
#8-32 X 1/2”
Junction Box Screw
G x 2 H
Wire Nut
I x 3
2

2Connecting the Wires
CAUTION: Do not cut any wires and remove the wire connectors.
*Connect the wires on the mounting plate (D) and the wires on the
junction box with wire nut (I).
- White to white
- Black to black
- Green ground wire to house ground
Note: Make sure the polarity is correct.
Installing the Mounting Bracket
*Align the holes on the mounting bracket (E) with the holes on
your junction box.
* Lock the two mounting screws (F or G) to the junction box.
Note:
*Make sure the mounting bracket with the stamped word "FRONT"
facing away from the junction box.*For the best performance, install the light fixture at 5.9 feet ~11.5
feet (1.8~3.5m) above the ground.
E
E
F or G
Installation
1
DI
E
3

Installing the Mounting Plate
• Place the mounting plate (D) against the junction box.
When installing the mounting plate to a wall, the “arrow” must be
upward.
When installing the mounting plate to an eave, the “arrow” must be
toward the house.
• Insert the small mounting bolt (B) through the mounting plate (D)
hole and mounting bracket (E) hole. Tighten the bolt (B) securely.
• Pull on the mounting plate (D) to verify if it is tightly attached to
the mounting bracket (E).
B
DI
E
arrow
3
4Mounting the Light Fixture
• Connecting the positioning hole of the light fixture (A) and
positioning pillar of the mounting plate (D).
• Tighten the large mounting bolt (H) securely through the center
of the mounting plate (D). DO not overtighten.
• Push the decorative rubber cover (C) firmly into the large
mounting bolt hole on the light fixture (A).
C H D
Positioning Hole Positioning Pillar
D
A
4

Note: If you install this light fixture on the covered wall or eave
without junction box, you must consult a qualified, licensed
electrician and use the appropriate screws (not included) to
install this light fixture on the wall or eave directly depending on
the surface.
How it Works
• Swing the lamp heads to adjust the lamp head left and right or up
and down to get the desired lamp direction.
• Gently grasp the motion sensor and adjust the sensor left and
right or up and down to get the desired lamp direction.
Adjusting the lamp heads and motion sensor
35º
80º
100º
90º 90º
70º
45º
45º
35º
100º
70º
5Use silicone caulk to seal completely around the gap between the
mounting bracket and the wall.
5

Please install the Smart Auto CCT Triple Head Security Light within
Wi-Fi covered area to ensure best performance. Make sure your smart
phone is connected with your wireless router.
Note: The security light only supports 2.4GHz and NOT 5GHz frequency.
Set up Router
Get the APP and create an account.
Download the ‘Home Zone Smart’ APP to your smartphone from APP
Store or Google Play.
Launch the APP from your
smart phone and Create
an account. Follow the
on-screen instruction.
Connect Home Zone Smart APP
Start Setting Smart Auto CCT Triple Head Security Flood Light
Short press the ON/OFF button in loop, there will be three models.
1. Light OFF model
2. Enter sensor model
3. Enter light always ON model with Auto CCT
Note: After long press the ON/OFF button about 5S, the smart
light can be reset.
After the smart security light is connected to electricity , the
floodlight will be flashing, then you can start pairing the Home Zone
Smart APP.
6

Setup the Smart Auto CCT Security Light
After the smart light is connected to electricity , the security light will
be flashing.Then you can pair your Smart Auto Light to Home
Zone Smart APP.
7
1. Tap “Add Device”
or "+" in the upper
right corner.
2. Tap CCT Smart Light. 3. Confirm the security
light is blinking rapidly
and tap Next.
4. Select 2.4Ghz Wi-Fi
network and enter
password and then
tap Next.
5. The connecting
status window will
appear.
Wait until it’s
completed.
6. Once device is
successfully added,
tap the Pen icon
to rename the device.
Then save the name
and tap Done.

Access the Features and Control your Smart Light
1. Home Page
2. Auto Page
8
Auto Page Motion Detection
Range Setting
Full Light Duration
Setting
Power ON/OFF
Auto CCT ON
Auto CCT OFF
CCT
Adjust color
temperature
manually
Adjust brightness
manually
CCT
Based on ambient
temperature, change
color temperature
automatically.

3. Schedule Page
9
Intelligent Linkable, can
tap "+" to link your desired
devices in this APP
Tap "+" in the upper
right corner.
Adjust the timer, and
then tap Power Switch.
Select the power switch
and then tap Save.
1. Luminance Detection:
- Can set ambient brightness
to active sensor
2. Slight Bright:
- Can set the light brightness
and duration

FCC
Cleaning and Maintenance
1. Clean periodically with soft cloth.
2. Do not use any cleaners with chemicals, solvents or harsh
abrasives on this light. Do not use scouring pads, powders, steel
wool or brasive paper. They could cause deterioration of the finish.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
This device complies with FCC Part 15 of FCC Rules.
Warning : Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE
: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
10
This equipment should be installed and operated with a minumum distance of 20 cm
between the radiator and your body.

Get exclusive offers and deals
when you subscribe!
Thank you for choosing Home Zone Security!
We are here to support you every step of the way.
Please be sure to contact our customer support for troubleshooting
and register your product for additional benefits. Products must be
sold by an authorized reseller or distributor to be valid.
• Receive your extended warranty
• Get professional warranty support
•Be the first to hear the latest product news.
• Get exclusive deals delivered to you email.
Scan below for link:
homezonesecurity.com
[e-mail]
US: [phone]
Register & Subscribe today to protect your investment and join our email list!
Why Register?
Distributed by
4198 Industry Way
Flowery Branch, GA 30542 USA
Made In Cambodia
Horizon Marketing Group, LLC
®