HOME8 FDS1300 User manual

What’s inside:
Fall Detector
Add-on Device
Quickstart Guide
Model No. FDS1300
All Home8 add-on devices have to work with Home8 systems.
1x Fall Detector
1x Lanyard 1x Power Cable

Nederlands
Stap 2: Voeg een apparaat toe
1. Open de Home8 app en kies uit de menulijst " " aan de zijkant " Apparaatbeheer ".
2. Druk op de toevoegen (" + ") knop naast de sensor-lijst.
3. Volg de instructies in de App om de QR-code te scannen op het apparaat.
Opmerking: Als de scan voltooid is moet u het serienummer (SN) van het apparaat invoeren.
Stap 1: Apparaat en accessoires gereedmaken voor gebruik
1. Haal het apparaat en de accessoires uit de verpakking.
2. Verbind het apparaat met de Centrale Module op een afstand van 0,5 - 3m en controleer of
de verbinding goed werkt.
3. Sluit de valdetector aan met de meegeleverde stroomkabel en verbind met het stopcontact.
1-10 ft

Nederlands
Stap 3: Test het bereik van het apparaat
Voordat u de sensor gaat gebruiken moet u testen of deze binnen het bereik van de
Centrale Module is.
1. Breng het apparaat in de ruimte waar u deze wilt gebruiken.
2. Test het apparaat door 3 seconden op de middelste knop te drukken. Als u een
noodmelding ontvangt ("Emergency") is het apparaat binnen het bereik. Om af te
breken drukt u opnieuw op de knop.
Om de valdetector daarna voor de eerste keer te gebruiken moet u het apparaat
minstens twee uur opladen. De batterij heeft een levensduur van ongeveer 7 dagen
bij een gebruik van twee meldingen per dag. Bij normaal gebruik is het aan te
raden om de detector elke dag op te laden om daarmee een continu functioneren
te waarborgen. Voor het beste gebruik raden wij u aan om het draagkoord zo kort
mogelijk te houden maar wel op een comfortabele hoogte.

FAQ
How can I backup recorded video?
You can backup your recorded video by using any of the following methods.
- By setting automatic backup to Dropbox. (Dropbox account needed)
- By sharing your recorded video from VideoGram to your appointed method.
How can I be certain my personal information is secured?
Our first level of security is authentication and your password is encrypted when you sign in to your
account. At the next level where all data is transmitted, including videos, images, as well account
information, bank-level AES data encryption is used.
How do I retrieve my Home8 Mobile app password?
Go to the sign-in page of your Home8 app and tap "Forgot password?". Follow the instruction on
screen to enter your phone number. You will then receive an access code via SMS. After input an
Access Code that app requested, you can then reset the password by yourself. You will also receive
a confirmation email after successfully reset your password.
How can I be sure unauthorized people are unable to look at my videos on the cloud?
With your privacy in mind, all data is encrypted with bank-level security, and each user has his/her
own account to access the video. Our system alerts you and your authorized users when it detects
login attempts from unauthorized smart devices.
How many locations can I manage from my Home8 app?
Home8 app is built to support multi-location management. You can manage as many locations as
you would like, and we do not place a limit on the number of Home8 Systems you can purchase.

FAQ
If I lose my smart device, what should I do to protect my Home8 account?
We recommend you to change your password as soon as possible by using other smart device with
Home8 App installed to sign in to your account to make the change to your password. Alternatively,
you may also contact us to disable your account for you.
What are the requirements prior to purchasing an Home8 System?
Because Home8 System is a fully IoT interactive system, it will require the following:
- Broadband Internet connection. (dial-up connections are not supported)
- DHCP-enabled router with an available LAN port.
- Smart devices with internet connection.
Is there a place I can view the user manual online?
Yes, visit www.home8systems.eu/en/download/ , and then access user manuals.
What can I do if a camera is offline?
If a camera is showing as “offline”, try power cycle on the camera first and wait approximately two
minutes, if the offline situation persists, try moving the camera closer to the Security Shuttle and
power cycle the device again. After tried the methods above, if the offline status is still not resolved,
please contact our Technical Support for further troubleshooting assistance.
What can I do if my system is offline?
First, try checking your internet connection, if the connection is working properly, then unplug the
network cable from your Security Shuttle for 10 seconds, and then reconnect it. If the Security Shuttle
is still offline after 5 minutes, please contact our Technical Support for further troubleshooting
assistance.

Troubleshooting Tips
Are your devices listed in your app?
If you’re having trouble installing your devices, see if they’re listed in your Home8 app:
• Navigate to > Device Management to see if all your devices are listed
• Tap +next to the device category and follow the on-screen instructions to add any missing devices
Are your devices communicating with Security Shuttle?
• If your devices don’t connect to Security Shuttle, they might be too far away. Take them to a location that’s
closer to Security Shuttle and try again.
• If they do connect, you’ll know the range of your device and where to install a range extender.
• Alternatively, you can move Security Shuttle closer to your device.
• If your devices still don’t communicate with Security Shuttle, even when they’re in the same room,
navigate to > Device Management > +on the Home8 app to add your devices again.
Need help installing your Home8 system?
https://www.home8systems.eu/en/download/
[e-mail]
V1.0