Homelegance 1957-5 User manual

ASSEMBLY INSTRUCTIONS /
INSTRUCTION D' ASSEMBLANGE
Thank you for purchasing this product. Please take time to read and follow the instructions below. Check that you have all parts and
hardware before assembly. Parts apparently missing are often found in the packing materials. If you do not have all the parts listed,
have your dealer contact us and they will be sent to you immediately.
It is recommended to install protective pads under all legs and supports to avoid damage or
scratches when placing furniture on a wood floor or other hard surface, and to limit
indentation and prevent discoloration if placing on carpet.
MADE IN MALAYSIA
FABRIQUER AU MALAYSIA
PAGE 1 OF 2 /
PAGE 1 DE 2
NOTE : MUST TIGHTEN SCREWS PERIODICALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
1
3
4
5
A
WARNING !
USE SHORT BOLT M6 x 35mm
A
B
ARROW MARKING - UP
**BACK VIEW
NO COMPONENT SKETCH QTY
A
MIRROR / MIROIR
1 PC
B
MIRROR SUPPORT / MIROIR
SOUTIEN
2
PCS
C
DRESSER / COMMOD E
1 PC
PART LIST/ LISTE DE PIECE
NO DESCRIPTION SKETCH SIZE QTY
1
JCBC BOLT/
BOULON M6 x 35MM
4
PCS
2
JCBC BOLT/
BOULON M6 x 40MM
4
PCS
3
SPRING WASHER / R ONDELLE D'
ARRET
1/4" x
2m m( Thick ness)
8
PCS
4
FLAT WASHER/ RONDELLE P LATE 1/4" ID x 19m m x
1m m( Thick ness)
8
PCS
5
ALLEN KEY / CLE ALLEN M4 x 65MM
1 PC
STEP 1 / ETAPE 1 :
B
Printed with FinePrint trial version - purchase at www.fineprint.com

MADE IN MALAYSIA
FABRIQUER AU MALAYSIA
PAGE 2 OF 2 /
PAGE 2 DE 2
NOTE : MUST TIGHTEN SCREWS PERIODICALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
B
2
35
4
A
CC
WARNING !
USE LONG BOLT M6 x 40mm
C
A
B
COMPLETED
ASSEMBLY
ASSEMBLAGE TERMINE
STEP 2 / ETAPE 2 :
Printed with FinePrint trial version - purchase at www.fineprint.com