Homelegance 2557-36 User manual

HOME ANCE
ASSEMBLY
INSTRUCTION
| ITEM : 2557-36
3pcs
Pack
Counter
Height
Breakfast
Set
This
page
lists
all
the
contents
included
in
the
Box.
Please
take time
to
identify
the
hardware
as
well
as
the
individual
components
to
this
product,
As
you
unpack
and
prepare
for
assembly,
plase
the
contents
on
a
carpeted
or
padded
area
to
protect
them
from
damage.
Cleaning & cC are treat surface with care, Clean surfaces with a dry or damp
soft cloth. Do not use abrasive cleaners. Hardware may loosen over time.
Periodically check that all connections are right.
A philips head screwdriver is nesessary for assembly.
i

PARTS
AND
HARDWARE
LIST-
TABLE
=
A.
Table
Top
B.
Table
Side
Frame
|
C.
Table
Crossbar
QTY:
1
PC
QTY:
2
PCS
QTY:
1
PC
1.
Large
Allen
Bolt
2.
Spring
Washer
|
3. Flat Washer
|
QTY: 4 PCS
4.
Large
Wood
Dowel|
5.
Wood
Screw
QTY: 4 PCS
6. Allen Wrench
|
~
QTY:
2
PCS
QTY:
2
PCS
QTY: 1 PC

ASSEMBLY
INSTRUCTION
-
TABLE
STEP
#1
1.
Place
the
table
top
upside
down
on
a
non-abrasive
surface
such
as
carpet.
Attach
a
table
side
to
the
table
top
as
shown.
Secure
using
two
large
allen
bolts
(1),
two
spring
washers
(2),
and
two
flat
washers
(3)
as
instruction
(a).
Tighten
the
bolts
with
allen
wrench
(6).
LAS
WA
4.
Secure
the
table
crossbar
(C)
to
the
table
sides
(B)
using
two
wood
screws
(5)
as
instruction
(c).
3

ASSEMBLY
INSTRUCTION
-
TABLE
COMPLETED
5.
Turn
the
table
upright.
The
table
is
now
ready
for
use.

ASSEMBLY
INSTRUCTION
-
STOOL
l
D. Seat Cushion
|
E.
Stool
Side
Frame
F.
Stool
Top
Crossbar
“se
t
QTY:
2
PCS
QTY:
4
PCS
QTY:
4
PCS
G.
Stool
Bottom
Crossbar
"i
P
QTY:
4
PCS
5.
Wood
Screw
6.
Allen
Wrench
7.
Long
Allen
Bolt
EE
a
SEN)
ene
A
J-
=
QTY:
8
PCS
QTY:
1
PC
QTY:
8
PCS
8. Short Allen Bolt
9.
Plastic
Washer
10.
Small
Wood
Dowel
j
e~
QTY: 8 PCS
QTY: 8 PCS
a
QTY: 8 PCS
5

ASSEMBLY INSTRUCTION - STOOL
STEP #4
1. Attach two stool top crossbars (F) to two stool sides (E) using four
small wood dowels (10) as instruction (a).
2. Secure the stool top crossbars (F) to the stool sides (E) using four
long Allen bolts (7) and four plastic washers (9) as instruction (b).
Tighten the Allen bolts with Allen wrench (6).
1. Attach two stool bottom crossbar (G) to the stool sides (E) using
four short Allen bolts (8) as instructiom (a). Tighten the bolts with
Allen wrench (6).

ASSEMBLY
INSTRUC
TION
-
STOOL
STEP
#6
4.
Place
the
seat
cushion
(D)
upside
down
on
a
non-abrasive
surface
such
as
carpet.
Attach
the
stool
base
to
the
seat
cushion
(D)
using
four
wood
screws
(5)
as
instruction
(a)
STEP #7
5.
Turn
the
stool
upright.
The
stool
is
now
ready
for
use.
6.
Repeat
Step
#4
to
#7
to
assembly
the
second
stool.
Printed
in
Vietnam