Homelegance 4615-F2 User manual

page 1 of 2
4615-F1/F2/F3/F4
LIFT TOP STORAGE BENCH W/PULL-OUT BED
Assembly Instruction
Thank you for your purchase of the Homelegance lift top
storage bench w/pull-out bed. Please check below instruction
for assembly.
NOTE:Do not tighten the bolts until all parts are
assembled. Legs,caster and hardware are stored
in the bottom of the bench, please take out for
assembly.
Pull Out Bed
Screw #8 x 45mm
Pillow
Screw #8 x 25mm
Plastic Leg Ø2"
NO. DRAWING QTY DESCRIPTION
A1pc
B
C
E
F
D
1pc
4pcs
8pcs
4pcs
4pcs
PART LIST
Caster
HARDWARE LIST

page 2 of 2
Configuration
STEP 1
Use scissors to cut straps.
STEP 2
STEP 3 STEP 4
A
AA
B
A
B
D
F
A
#E
#C
A
STEP 5 STEP 6
CARE INSTRUCTION FOR FABRIC:
In order to maintain the original appearance of your fabric furniture,
please follow below simple care procedure:
Avoid exposing furniture directly to sunlight or heating and air conditioning
outlets.Exposure to sunlight or heating and air conditioning outlets will
fade/damage fabric.
Wipe gently with a damp soft cloth to remove dust, dirt and any grime build up.
B
BOX
A
Pillow inside the storage.
Lay back part slot as a bed.
It is recommended to install protective pads under all legs and supports to
avoid damage or scratches when placing furniture on a wood floor or other
hard surface and to limit indentation and prevent discoloration if placing on
carpet.