Homelegance 5149S User manual

1pc 1pc
1pc
1pc
1pc
8pcs
1pc
6pcs2pcs
4pcs
Chair Back Seat Frame Support Bar(L) Support Bar(R)
Bolt
Seat BoltChair Leg
AC B D
EG FH
1/4"*12mm 1/4"*20mm
4*16mm
L-Allen KeyScrew
I J
This page lists all the contents included in the
box.Please take the time to identify the
hardware as well as the individual components
to this product.As you unpack and prepare for
assembly,place the contents on a carpeted or
padded area to protect them from damage.
5149S(3A) METAL FRAME SIDE CHAIR
1

1
2
Attach Seat Frame(B) and Support Bars(C&D) to the Chair Back(A), insert Bolt(G) and
Attach Chair Legs(E) to the Seat Frame(B), insert the Bolt(H), and tighten with L-Allen(J).
tighten with L-Allen Key(J).
Take the Allen Wrench,and turn the
bolts until the legs are secure.
DO NOT TIGHTEN COMPLETELY.
Stop when you feel you are adding
force to tighten the bolt. A
B
A
B
D
J
G
AB
C
E
B
E
B
J
H
E
G
J
2

3Attach Seat(F) onto the Seat Frame(B), insert the Screw(I) then tighten it.
Cleaning & Care
Treat surface with care.Surface is resistant to scratches but is not scratch resistant.Clean surfaces with a
dry or damp soft cloth.Do not use abrasive cleaners.Hardware may loosen over time.Periodically check that
all connections are tight.
Helpful Tip:
-Instead of applying downward
pressure while reaching
under to tighten bolts,
have someone sit in the
chair while you tighten the bolts.
Stand chair up on an even surface and
check that it is balanced.
If there is a slight wobble,apply downward
pressure in the corner where a leg is
uneven.Keeping pressure in that corner,
tighten all bolts.
If balanced,apply downward pressure
evenly in the center and tighten all bolts.
Do not over-tighten beyond hole depth.
3
B
B
I
F
F