Homelegance 8557GY-1PB User manual

NO. DESCRIPTION QTY DRAWING
A
PAGE 1 OF 3
MADE IN VIETNAM
PARTS LIST
B
1 PC
ASSEMBLY INSTRUCTIONS
R
Thank you for purchasing this product. Please take time to read and follow the instructions below.
Check that you have all parts and hardware before assembly. Parts apparently missing are often
found in the packing materials. If you do not have all the parts listed, have your dealer contact us
and they be sent to you immediately.
It is recommended to install protective pads under all legs and support to avoid damage or scratches
when placing furniture on a wood floor or orther hard surface, and to limit Indentation and prevent
discoloration if placing on carpet.
1 PC
STEP 1:
LEGS
INSIDE
8557
LEGS
INSIDE
1
C
D
C
D
2 PCS
2 PCS
SEAT
BACK
WOODEN
FRONT LEG
6.25''×1.75''×1.75''
WOODEN
REAR LEG
6.25''×2.25''×1.5''
ITEM NO:8557GY-1PB
Push Back Reclining Chair

R
STEP 2:
STEP 3:
ASSEMBLY INSTRUCTIONS
PAGE 2 OF 3
MADE IN VIETNAM
A
C
D
C
D
B
A
ITEM NO:8557GY-1PB
Push Back Reclining Chair

R
ASSEMBLY INSTRUCTIONS
PAGE 3 OF 3
MADE IN VIETNAM
STEP 4:
ITEM NO:8557GY-1PB
Push Back Reclining Chair
Care Instruction for Textured Furniture:
In order to maintain the original appearance of your Textured Furniture,
please follow below simple care procedures:
• Avoid exposing furniture directly to sunlight or heating and air
conditioning outlets. Sunlight and or exposure to heating and air
conditioning outlets will fade/damage Textured.
• Vacuum or wipe with a soft cloth to remove dust.
• Hardware may loosen over time. Periodically check to make sure all connection are tight,
Re-tighten if necessary.
For items use on wooden floor, hard surfaces or carpets, it is
recommended to Install protective pads under all legs and
supports to avoid/prevent from damages/scratches and
discoloration.