Homelegance 8378BLK-L User manual

NOTE:Do not use power tools for assembly.Power tools increase the risk of over tightening
which lead to splitting or cracking the wood.
COMPONENT LIST
NO. DRAWING QTY DESCRIPTION NO. DRAWING QTY DESCRIPTION
A 8 METAL LEG H 1 LSF BACK REST
B16 WASHER J 1 RSF CHAISE
C 1 ALLEN KEG K 1 LSF 3-SEATER
D16 BOLT I 1 LSF BACK CUSHION
E 1 LSF ARM REST N 3 MIDDLE BACK CUSHION
F 1 RSF CHAISE BACK REST OL 1 LEFT SIDE CORNER BACK CUSHION
F 1 RSF CHAISE BACK REST OR 1 RIGHT SIDE CORNER BACK CUSHION
G 1 RSF CHAISE BACK REST Q 1 SUPPORT LEG
Legs and hardware are stored at the bottom of the 3 seater and chaise, please take out
for assembly.
Assembly Instruction
ITEM NO.:
8378BLK-L/BRW-L/GRY-L LSF 3 SEATER
8378BLK-R/BRW-R/GRY-R RSF CHAISE

Step 1
Align the legs to the pre-drilled holes at the bottom of the units, insert bolts and washers
then tighten with Allen Key. Rotate support leg Q to tighten it.
Step 2
Align and insert the back rest to the positon shown in drawing, push to the end to secure it.
Step 3
Aligh the entire back cushions to the back rest, attach to the Velcro, adjust and fix it properly.
Care instruction for PU furniture.
In order to maintain the original appearance of your PU furniture,
please follow below simple care procedures:
Avoid exposing furniture directly to sunlight or heating and air conditioning outlets.
Sunlight and/orexposure to heating and air conditioning outlets will fade/damage PU.
Do not place your PU surface furniture too close to windows,radiators,or vents,and be sure
to use windows,radiators,or vents.
Vacuum or wipe with a cloth regularly to remove dust.
Clean PU surface furniture with professional cleanser.
For items use on wooden floor,hard surfaces or carpets,it is recommended to install
protective pads under all legs and supports to avoid/prevent from damages/scratches and
discoloration.
N
OR
N
I
OL
N