Homelegance Cinque 8256 User manual

Assembly Instruction
RSF 2-SEATER WITH ONE POWER RECLINER,
USB PORT AND ADJUSTABLE HEADRESTS
ITEM NO.: 8256 / 8256GY / 8256SW / 8256FBR-RPW
NOTE: Do not use power tools for assembly. Power tools increase the risk of over tightening which leads to splitting or cracking
the wood.
COMPONENT LIST (CHAIR)
NO. DRAWING QTY DESCRIPTION
A
HARDWARE LIST
NO. DRAWING QTY DESCRIPTION
1
1 PC
2
2 PCS
QP-AI-P022-152-1
1 PC
3
2 PCS
RSF 2-SEATER
ADAPTOR
PLUG WITH WIRE
4
5
6
7
8
9
8 PCS
8 PCS
2 PCS
2 PCS
1 PC
METAL LEG
LOCK WASHER
BOLT
ALLEN KEY
PLASTIC LEG
PLASTIC GASKET
1 PC
ADJUSTABLE LEG
1/3

QP-AI-P022-152-1
STEP#2
Place the cap screw from the end through the plastic leg, insert the gasket onto the leg. Rotate clockwise to tighten
the leg. After that rotate clockwise to tighten the adjustable leg. Turn the leveler at the bottom of support leg to
adjust the height to be level with floor.
STEP#3
RPW
L
STEP#4
1
1
6
6
5
5
STEP#1
Align and attach legs to chair, insert bolts and washers and tighten with Allen key.
3
4
2
5
5
66
Adjustable
leveler
6
2/3
8
9
5
7

QP-AI-P022-152-1
STEP#5
Completed.
Control Switch
USB Port
5V/1A
Press
(Recline)
CARE INSTRUCTION FOR GENUINE ALL LEATHER:
In order to maintain the original appearance of your leather furniture, please follow below simple care
procedure :
Avoid exposing furniture directly to sunlight or heating and air conditioning outlets. Exposure to sunlight or heating and
air conditioning outlets will fade/damage leather.
Wipe gently with a damp soft cloth to remove dust, dirt and any grime build up.
Disconnect the eletrical plug from the wall outlet before cleaning, moving, servicing or when not in use for an
extended period of time.
Plug directly into a wall outlet. Do not use an extension cord or adaptor.
Check the condition of the power transfomers, electrical cords, plugs and connectors monthly. Keeps the power
adaptor and electrical cords away from heat sources. Never operate the unit with a damaged power adaptor,
electrical cord, plug or connector.
Before moving the product, please disconnect the electrical plug from the wall outlet and secure the mechanism to prevent
unexpected opening or movement. Never move the product by the mechanism, legrest, handle, or reclining back.
Do not attempt to disassemble or service the adaptor or motor. No serviceable parts are inside.
Do not allow electrical cord to be pinched between moving parts or between the frame and the floor. Do not place cord
under carpet or in location where it could become worn.
Unplug the power cord immediately if you detect strange odors or fumes coming from the chair.
3/3