Honeywell CL60PM Series User manual

Portable Evaporative Air Cooler
OWNER’S MANUAL
Read and save these instructions before use
Made in China
0
3
2
1
ON
COOL
SPEED SWING
ON
OFF
OFF
Model: CL60PM
Voltage rating: 220-240V 50Hz
Power rating: 220W
SERVICE CENTER : 1300 8000 32
E-mail : [email protected]

This page is intentionally left blank

SECTION PAGE
1. THANK YOU .........................................................................................................
2. USER TIPS ...........................................................................................................
3. SAFETY RULES ...................................................................................................
4. PARTS DESCRIPTION .........................................................................................
5. USE & OPERATION .............................................................................................
Installing Hose Adapter And Float Valve ..............................................................
Filling Water .......................................................................................................
6. CLEANING & MAINTENANCE .............................................................................
7. TROUBLESHOOTING GUIDE .............................................................................
8. TECHNICAL SPECIFICATIONS ...........................................................................
9. ELECTRICAL WIRING DIAGRAM ........................................................................
2
3
5
7
8
8
8
Control Panel ........................ ........................................................................... 9
Control Knobs ................................................................................................... 10
11
13
14
15
INDEX
1
Read all instructions carefully before setting up and operating the unit, and please keep
this instruction manual for future reference. This manual is designed to provide you with
important information needed to setup, operate, maintain, and troubleshoot your cooler.
Failure to follow these instructions may damage and/or impair its operation and void the
warranty.

THANK YOU!
Please read these instructions carefully.
THANK YOU
2
Congratulations on your purchase of this versatile Honeywell Evaporative Air Cooler. For optimum
cooling performance from your unit, fill the water tank with water & ice (if available) to increase its
cooling power.

USER TIPS
COOL ~ EFFICIENT ~ NATURAL
3
Pump
Water
Honeycomb Cooling Media
Evaporative Air Cooling Mechanism
Warm and
dry air
Cold and
humid air
Evaporative air cooling is the natural way of cooling, similar to a breeze blowing across a lake. This
breeze drops the temperature and has a relaxing cooling effect.
The evaporative air cooler cools the air by means of the evaporation of water. When water
evaporates into the air, the result is a mixture of air and water molecules. This chemical change
requires heat which is taken from the water molecules, resulting in cooler air propelled from the
unit.

NOTE
4
USER TIPS
OFF
COOL
ON
OFF
SWING
ON
0
3
2
1
OFF
COOL
ON
OFF
SWING
ON
0
3
2
1
The recommended maximum relative humidity level is 60% or
less, which allows a noticeable temperature decrease. The
temperature decrease will be greater in drier climates because
higher evaporation occurs when the humidity is low.
The evaporative air cooler should not be used in enclosed
spaces. It must be kept level and there must be water in the
water tank. The room should have doors and windows opened
to allow free air flow. The evaporative air cooler works best
when placed near an open window, so that outside air is drawn
into the evaporative air cooler, circulates in the room, then
exits via the door. The maximum cooling effect is felt when a
person is in the flow of air coming out of the evaporative air
cooler.
The evaporative air cooler can also be used to humidify dry air
during cool weather. To be used for humidification the
windows and doors should be closed to allow the humidified
air to accumulate. The evaporative air cooler is not an air
conditioner as it does not use a compressor or refrigerant gas.
It should not be expected to cool as efficiently as a refrigerated
air conditioner.
When the product is used for the first time the Honeycomb
cooling media will have an odour which will dissipate in a week
or so of initial use.

READ AND SAVE THESE INSTRUCTIONS:
SAFETY RULES
220-240 Volt AC 50Hz
SHOCK HAZARD
WATER LEVEL INDICATOR
5
MAX
MIN
OFF
COOL
ON
OFF
SWING
ON
0
3
2
1
When using electrical appliances, basic safety precautions should always be followed:
Always unplug the product before refilling the water tank.
•
Always unplug the appliance from the power source before
cleaning, servicing or relocating the unit.
•
Remove the power cord from the electrical receptacle by
grasping and pulling on the power cord plug-end only, never
pull the cord.
•
DO NOT use the product in areas where gasoline, paint or
other flammable goods and objects are stored.
•
When using the ''COOL'' setting, please check the water tank
to ensure it is full. Operation of this unit on the ''COOL'' setting
with an empty tank may result in damage to the water pump.
•
DO NOT run power cord under carpeting, or cover it with
rugs or runners. Keep the cord away from areas where it
may be tripped over.
•
•Your cooler runs on 220-240 Volt AC, 50 Hz current. Check
thehousehold voltage to ensure it matches the appliance's
rate specification.
•Before operating the product remove it from its packaging
and check it is in good condition.
•DO NOToperate any product with a damaged cord or plug.
We recommend not using an extension cord with this
appliance.

OFF
COOL
ON
OFF
SWING
ON
0
123
Water / Ice compartment
SAFETY RULES
FLOOR LEVEL
6
may cause motor damage.
This appliance is not intended for use by persons (including
children or elderly) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they
have been given supervision or instructions concerning the
use of the appliance by a person responsible for their safety.
•
When the unit is not in use always store in a dry area.
•
This product is not intended for use in wet or damp locations.
•
DO NOT let children play with this appliance, packaging or
plastic bags.
•
DO NOT leave the appliance operating unattended for any
extended period of time.
•
DO NOT operate with the Honeycomb Cooling Media removed
as this will overload and damage the motor.
•
DO NOT insert or allow objects to enter any ventilation or
exhaust opening as this may damage the product and could
cause electrical shock or fire.
•
DO NOT attempt to repair or adjust any electrical or mechanical
functions of the cooler, as this may void the warranty.
•
DO NOT cover the air inlet or outlet on the appliance as this
•
If the unit is damaged or it malfunctions, do not continue to
operate it. Refer to the troubleshooting section and /or please
seek professional advice.
•
Place the unit on a level floor.
•
Never locate the product where it may fall into a bathtub or
other water container. DO NOT use in bathrooms or outdoors.
•
Always grip the side handles to move the unit.
•

OFF
COOL
ON
OFF
SWING
ON
0
3
2
1
PARTS DESCRIPTION
7
1
2
9
8
3
10
11
13
12
14 4
5
6
7
1 Water / Ice Inlet
2 Handle
3 Honeycomb Panel (Right)
4 Lever for Horizontal Louvers
5 Water Tank
6 Castors
7 Horizontal Louvers
8 Water Level Indicator
9 Mechanical Control Panel
10 Honeycomb Panel (Left)
11 Continuous Water Connector
12 Drain Plug
13 Manual Water Inlet
14 Back Honeycomb Panel

INSTALLING HOSE ADAPTER AND FLOAT VALVE
FILLING WATER
Water can be filled into the air cooler by:
Continuous water supply
Connect a garden hose to the continuous water supply inlet.
Manual operation
Water can be poured into the unit from the back.
Water / Ice compartment
Water / ice can be put into the tank though the top opening.
There is a hole for water to flow into the tank.
• Connect the garden hose Connector and turn on the water.
• Verify water tight connections by visually examining both
the float/hose connections.
USE & OPERATION
8
Hose Connector

CONTROL PANEL
9
USE & OPERATION
COOL SPEED SWING
OFF ON OFF ON
03
2
1
NOTE:
Speed control may be marked as High / Med / Low in certain units.

CONTROL KNOBS
SPEED / ON - OFF
Connect to the power supply and turn the Speed knob. The fan
will start. Change the speed from 1 for Low to 2 for Medium to
3 High. To switch OFF the unit turn the Speed know to "0".
COOL
Turn the Cool knob to ON to start the cooling. It takes a few
minutes to obtain the full effect from this mode.
SWING
Vertical Louvers
Turn the SWING knob to ON. The louvers will begin to move
from right to left automatically.
Horizontal Louvers
Manually adjust the horizontal louvers to change vertical airflow.
COOL
OFF ON
SWING
OFF ON
10
USE & OPERATION
SPEED
03
2
1

WARNING
CLEANING & MAINTENANCE
Before cleaning the unit, switch it to the ''off'' position and remove the plug from
the power socket.
To clean the outside, use a damp cloth to remove dirt and dust.
Never use detergents, corrosive elements or any chemicals to clean this product.
When the product is not in use, store the unit in a dry place out of direct sunlight.
to clean this product.
CLEANING AND DRAINING THE WATER TANK
•
•
•
•
•
•
•
•
11
Turn the power "off" and disconnect the unit from power supply.
Move the unit to a location where it can be drained and remove the drainage
tube/cap (see parts description on page 7).
Once the tank is empty, refill with clean water and drain it again.
This should be repeated weekly to maintain the integrity of the unit and to
remove particles filtered from the air.
Once the tank is clean, refill the water tank. The unit is now ready to be used
again.

CLEANING & MAINTENANCE
The appliance is supplied with Honeycomb cooling media.
The cleaning frequency for the Honeycomb media depends on local air and water
conditions. In areas where the mineral content of water is high, mineral deposits
may build up on the honeycomb cooling media and restrict air flow. Draining the
water reservoir and refilling with fresh water at least once a week will help reduce
mineral deposits. If mineral deposits remain on the Honeycomb media, the media
should be removed and washed under fresh water. The media should be cleaned
every two months or sooner, depending on your needs.
Do not run the unit in COOL mode with stale water in the tank. It is recommended
to empty the tank and refill it with fresh water if the water has been standing in the
tank for an extended period of time.
For best results, allow the honeycomb cooling media to dry after each use by turning
off the cool function 15 minutes before turning the unit off.
MAINTAINING AND CHANGING THE HONEYCOMB
•
•
•
•
To change the Honeycomb, remove the hand screws which hold the side panel
(Refer Fig.1). Remove the Honeycomb holder and replace the Honeycomb.Refix the
Honeycomb holder and screw back the panel to the unit.
•
12
This unit is supplied with three (3) Honeycomb Cooling Media's located on the back &
two sides. The removal procedure for all the media's is same as explained above.
NOTE:
Hand ScrewHand Screw
Honeycomb Holder
Side Panel
Fig.1

13
TROUBLESHOOTING GUIDE:
No discharge of air Cord is not plugged in. Make sure power cord is plugged
in and the supply switch in ON.
Power is not ON. Try to turn the unit ON by
pressing buttons on control
panel.
Not Cooling / Unit is
making noise
Pump is not turned ON. Turn on COOL function by
changing the mechanical knob
position on the control panel.
Low or no water in tank,
when COOL is selected.
Refill water tank.
Odour omission When the Cooler is new. When the unit is used for the
first time, the Honeycomb
cooling media will have an
odour, which will dissipate
within a week of initial use.
If the Cooler has been used. There may be an algae issue,
Replace the honeycomb cooling
media. Contact Customer
Service Centre.
Damaged Pump or Calcium
deposits on blower.
Contact Customer Service
Centre.
PROBLEM POSSIBLE CAUSE SOLUTION
SERVICE CENTER : 1300 8000 32
E-mail : [email protected]

MODEL NO. CL60PM
220-240V
50Hz
220 Watts
60 Litre
Honeycomb
700 (L) x 466 (W) x 1017 (H)
17.8 Kg
Voltage
Frequency
Wattage
Water Tank Capacity
Cooling Media
Product Dimension
Net Weight
TECHNICAL SPECIFICATIONS
14

ELECTRICAL WIRING DIAGRAM
15
220-240VAC 50Hz

IM01-1009-000-000
November 2013
© 2013 AirTek International Corporation Limited
The Honeywell Trademark is used under license from
Honeywell International Inc.
Honeywell International Inc. makes no representation or
warranties with respect to this product.
Manufactured by AirTek International Corporation Limited.
Sole Distributor in Malaysia:
Khind Alliances Sdn Bhd
(formerly known as Indesico(M) Sdn Bhd)
2, Jalan Astaka U8/82, Bukit Jelutong
40150 Shah Alam
Selangor