Honeywell Xenon 1910 User manual

Xenon™ 1900/1910
Xenon™ 1902/1912
Granit™ 1910i/1911i
Area-Imaging Scanner
User’s Guide

Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this
document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been
made. The information in this publication does not represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages
resulting from the furnishing, performance, or use of this material. HII disclaims all responsibility for the selection and use of
software and/or hardware to achieve intended results.
This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document
may be photocopied, reproduced, or translated into another language without the prior written consent of HII.
2010-2015 Honeywell International Inc. All rights reserved.
Web Address: www.honeywellaidc.com
Microsoft® Windows®, Windows NT®, Windows 2000, Windows ME, Windows XP, and the Windows logo are trademarks or
registered trademarks of Microsoft Corporation.
The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc.
Other product names or marks mentioned in this document may be trademarks or registered trademarks of other companies
and are the property of their respective owners.
For patent information, please refer to www.hsmpats.com.

i
Chapter 1 - Getting Started
About This Manual ...............................................................................................................1-1
Unpacking Your Device .......................................................................................................1-1
Connecting the Device.........................................................................................................1-1
Connecting with USB .....................................................................................................1-1
Connecting with Keyboard Wedge.................................................................................1-3
Connecting with RS232 Serial Port................................................................................1-6
Connecting with RS485..................................................................................................1-8
Mounting a CCB01-010BT Charge Base.............................................................................1-9
Mounting a CCB02-100BT Base..........................................................................................1-9
Reading Techniques ..........................................................................................................1-11
Xenon 1900/1902/1910/1912 and Granit 1910i/1911i .................................................1-11
Granit 1980i/1981i........................................................................................................1-12
Menu Bar Code Security Settings......................................................................................1-12
Setting Custom Defaults ....................................................................................................1-13
Resetting the Custom Defaults ..........................................................................................1-13
Chapter 2 - Programming the Interface
Introduction ..........................................................................................................................2-1
Programming the Interface - Plug and Play .........................................................................2-1
Keyboard Wedge .................................................................................................................2-1
Laptop Direct Connect .........................................................................................................2-1
RS232 Serial Port ................................................................................................................2-1
RS485 ..................................................................................................................................2-2
RS485 Packet Mode ......................................................................................................2-2
USB IBM SurePos ...............................................................................................................2-3
USB PC or Macintosh Keyboard..........................................................................................2-3
USB HID ..............................................................................................................................2-4
USB Serial ...........................................................................................................................2-4
CTS/RTS Emulation.......................................................................................................2-4
ACK/NAK Mode .............................................................................................................2-4
Remote MasterMind™ for USB ...........................................................................................2-4
Verifone®Ruby Terminal Default Settings...........................................................................2-5
Gilbarco®Terminal Default Settings ....................................................................................2-5
Honeywell Bioptic Aux Port Configuration ...........................................................................2-5
Datalogic™ Magellan®Aux Port Configuration....................................................................2-6
NCR Bioptic Aux Port Configuration ....................................................................................2-6
Wincor Nixdorf Terminal Default Settings ............................................................................2-6
Wincor Nixdorf Beetle™ Terminal Default Settings .............................................................2-7
Wincor Nixdorf RS232 Mode A ............................................................................................2-7
Keyboard Country Layout ....................................................................................................2-8
Keyboard Style...................................................................................................................2-15
Keyboard Conversion ........................................................................................................2-16
Control Character Output...................................................................................................2-17
Keyboard Modifiers ............................................................................................................2-17
Table of Contents

ii
RS232 Modifiers ................................................................................................................ 2-18
RS232 Baud Rate........................................................................................................ 2-18
RS232 Word Length: Data Bits, Stop Bits, and Parity.................................................2-19
RS232 Receiver Time-Out........................................................................................... 2-20
RS232 Handshaking.................................................................................................... 2-21
RS232 Timeout............................................................................................................ 2-21
XON/XOFF .................................................................................................................. 2-21
ACK/NAK..................................................................................................................... 2-22
Scanner to Bioptic Communication ................................................................................... 2-22
Scanner-Bioptic Packet Mode .....................................................................................2-22
Scanner-Bioptic ACK/NAK Mode................................................................................. 2-22
Scanner-Bioptic ACK/NAK Timeout............................................................................. 2-23
Chapter 3 - Cordless System Operation
How the Cordless Charge Base/Access Point Works .........................................................3-1
Linking the Scanner to a Charge Base................................................................................ 3-1
Linking the Scanner to an Access Point .............................................................................. 3-1
Replacing a Linked Scanner................................................................................................ 3-2
Communication Between the Cordless System
and the Host......................................................................................................................3-2
Programming the Scanner and Base or Access Point ........................................................3-3
RF (Radio Frequency) Module Operation ...........................................................................3-3
System Conditions...............................................................................................................3-3
Linking Process ............................................................................................................. 3-3
Scanner Is Out of Range ............................................................................................... 3-3
Scanner Is Moved Back Into Range .............................................................................. 3-3
Out of Range and Back into Range with Batch Mode On..............................................3-3
Page Button......................................................................................................................... 3-4
About the Battery................................................................................................................. 3-4
Charging Information ..................................................................................................... 3-4
Battery Recommendations ............................................................................................ 3-4
Proper Disposal of the Battery....................................................................................... 3-5
Beeper and LED Sequences and Meaning ......................................................................... 3-5
Scanner LED Sequences and Meaning.........................................................................3-5
Base/Access Point LED Sequences and Meaning........................................................ 3-5
Base Power Communication Indicator........................................................................... 3-6
Reset Scanner..................................................................................................................... 3-6
Scanning While in Base Cradle ........................................................................................... 3-6
Base Charging Modes......................................................................................................... 3-6
Paging ................................................................................................................................. 3-7
Paging Mode.................................................................................................................. 3-7
Paging Pitch...................................................................................................................3-8
Error Indicators .................................................................................................................... 3-8
Beeper Pitch - Base Error.............................................................................................. 3-8
Number of Beeps - Base Error ...................................................................................... 3-8
Scanner Report ................................................................................................................... 3-9
Scanner Address.................................................................................................................3-9
Base or Access Point Address ............................................................................................ 3-9

iii
Scanner Modes ...................................................................................................................3-9
Charge Only Mode......................................................................................................... 3-9
Linked Modes .............................................................................................................. 3-10
Unlinking the Scanner ....................................................................................................... 3-10
Override Locked Scanner............................................................................................3-11
Out-of-Range Alarm .......................................................................................................... 3-11
Alarm Sound Type....................................................................................................... 3-11
Scanner Power Time-Out Timer........................................................................................ 3-12
Flexible Power Management ............................................................................................. 3-13
Batch Mode ....................................................................................................................... 3-13
Batch Mode Beep ........................................................................................................ 3-14
Batch Mode Storage.................................................................................................... 3-14
Batch Mode Quantity ................................................................................................... 3-15
Batch Mode Output Order............................................................................................3-17
Total Records .............................................................................................................. 3-17
Delete Last Code......................................................................................................... 3-17
Clear All Codes............................................................................................................ 3-17
Transmit Records to Host............................................................................................ 3-17
Batch Mode Transmit Delay ........................................................................................ 3-18
Multiple Scanner Operation ............................................................................................... 3-18
Scanner Name................................................................................................................... 3-18
Application Work Groups...................................................................................................3-19
Application Work Group Selection............................................................................... 3-20
Resetting the Factory Defaults: All Application Work Groups ........................................... 3-20
Resetting the Custom Defaults: All Application Work Groups ........................................... 3-21
Using the Scanner with Bluetooth Devices........................................................................ 3-21
Bluetooth Secure Simple Pairing (SSP) ...................................................................... 3-21
Bluetooth HID Keyboard Connect................................................................................3-22
Virtual Keyboard .......................................................................................................... 3-23
Bluetooth HID Keyboard Disconnect ........................................................................... 3-23
Bluetooth Serial Port - PCs/Laptops............................................................................3-23
PDAs/Mobility Systems Devices.................................................................................. 3-24
Changing the Scanner’s Bluetooth PIN Code.............................................................. 3-24
Minimizing Bluetooth/ISM Band Network Activity.............................................................. 3-24
Auto Reconnect Mode ................................................................................................. 3-24
Maximum Link Attempts ..............................................................................................3-25
Relink Time-Out........................................................................................................... 3-25
Bluetooth/ISM Network Activity Examples...................................................................3-25
Host Acknowledgment....................................................................................................... 3-26
Chapter 4 - Input/Output Settings
Power Up Beeper ................................................................................................................ 4-1
Beep on BEL Character.......................................................................................................4-1
Trigger Click ........................................................................................................................ 4-2

iv
Good Read and Error Indicators..........................................................................................4-2
Beeper – Good Read..................................................................................................... 4-2
Beeper Volume – Good Read........................................................................................ 4-2
Beeper Pitch – Good Read............................................................................................ 4-3
Vibrate – Good Read..................................................................................................... 4-3
Beeper Pitch – Error ......................................................................................................4-4
Beeper Duration – Good Read ......................................................................................4-4
LED – Good Read ......................................................................................................... 4-4
Number of Beeps – Good Read .................................................................................... 4-5
Number of Beeps – Error............................................................................................... 4-5
Beeper Volume Max ...................................................................................................... 4-5
Good Read Delay .......................................................................................................... 4-5
User-Specified Good Read Delay..................................................................................4-6
Manual Trigger Modes......................................................................................................... 4-6
LED Illumination - Manual Trigger .................................................................................4-6
Serial Trigger Mode.............................................................................................................4-7
Read Time-Out .............................................................................................................. 4-7
Presentation Mode .............................................................................................................. 4-7
LED Illumination - Presentation Mode ...........................................................................4-8
Presentation LED Behavior after Decode......................................................................4-8
Presentation Sensitivity ................................................................................................. 4-8
Presentation Centering .................................................................................................. 4-8
In-Stand Sensor Mode....................................................................................................... 4-10
CodeGate®........................................................................................................................ 4-10
Streaming Presentation™ Mode ....................................................................................... 4-11
Streaming Presentation In-Stand Programming .......................................................... 4-11
Mobile Phone Read Mode................................................................................................. 4-11
Hands Free Time-Out........................................................................................................ 4-12
Reread Delay..................................................................................................................... 4-12
User-Specified Reread Delay ...................................................................................... 4-12
2D Reread Delay ......................................................................................................... 4-13
Character Activation Mode ................................................................................................ 4-13
Activation Character .................................................................................................... 4-14
End Character Activation After Good Read................................................................. 4-14
Character Activation Timeout ...................................................................................... 4-14
Character Deactivation Mode ............................................................................................ 4-14
Deactivation Character ................................................................................................ 4-15
Illumination Lights.............................................................................................................. 4-15
Aimer Delay ....................................................................................................................... 4-15
User-Specified Aimer Delay.........................................................................................4-16
Aimer Mode ....................................................................................................................... 4-16
Centering........................................................................................................................... 4-16
Preferred Symbology......................................................................................................... 4-18
High Priority Symbology ..............................................................................................4-18
Low Priority Symbology ............................................................................................... 4-18
Preferred Symbology Time-out....................................................................................4-19
Preferred Symbology Default....................................................................................... 4-19

v
Output Sequence Overview............................................................................................... 4-19
Output Sequence Editor ..............................................................................................4-19
To Add an Output Sequence ....................................................................................... 4-19
Other Programming Selections.................................................................................... 4-20
Output Sequence Editor ..............................................................................................4-21
Partial Sequence ......................................................................................................... 4-21
Require Output Sequence ........................................................................................... 4-21
Multiple Symbols ............................................................................................................... 4-22
No Read ............................................................................................................................ 4-22
Video Reverse ...................................................................................................................4-23
Working Orientation........................................................................................................... 4-23
Chapter 5 - Healthcare Settings
Quiet Operations - Combination Codes............................................................................... 5-1
Silent Mode with Flashing LED...................................................................................... 5-1
Silent Mode with Long LED ........................................................................................... 5-1
Very Low Beeper (Nighttime Mode)............................................................................... 5-1
Low Beeper (Daytime Mode)......................................................................................... 5-2
Page Button and Presentation Modes.................................................................................5-2
Temporary Streaming Presentation Timeout................................................................. 5-2
Quiet Operations - LED and Volume Settings ..................................................................... 5-3
Linking LED Colors and Sound...................................................................................... 5-3
Number of LED Flashes ................................................................................................5-3
LED Flash Rate ............................................................................................................. 5-4
LED Solid (No Flash)..................................................................................................... 5-4
Paging Volume Control.................................................................................................. 5-4
Out-of-Range Alarm Volume .........................................................................................5-5
Out-of-Range Delay....................................................................................................... 5-6
Chapter 6 - Data Editing
Prefix/Suffix Overview ......................................................................................................... 6-1
To Add a Prefix or Suffix:............................................................................................... 6-1
To Clear One or All Prefixes or Suffixes........................................................................6-2
To Add a Carriage Return Suffix to All Symbologies..................................................... 6-2
Prefix Selections.................................................................................................................. 6-2
Suffix Selections.................................................................................................................. 6-2
Function Code Transmit ...................................................................................................... 6-3
Intercharacter, Interfunction, and Intermessage Delays...................................................... 6-3
Intercharacter Delay ...................................................................................................... 6-3
User Specified Intercharacter Delay.............................................................................. 6-3
Interfunction Delay......................................................................................................... 6-4
Intermessage Delay....................................................................................................... 6-4
Chapter 7 - Data Formatting
Data Format Editor Introduction ..........................................................................................7-1
Add a Data Format .............................................................................................................. 7-1
Other Programming Selections...................................................................................... 7-2

vi
Terminal ID Table................................................................................................................ 7-3
Data Format Editor Commands........................................................................................... 7-3
Move Commands........................................................................................................... 7-6
Search Commands ........................................................................................................ 7-7
Miscellaneous Commands............................................................................................. 7-9
Data Formatter ..................................................................................................................7-12
Data Format Non-Match Error Tone............................................................................ 7-13
Primary/Alternate Data Formats........................................................................................7-13
Single Scan Data Format Change............................................................................... 7-13
Chapter 8 - Symbologies
All Symbologies................................................................................................................... 8-1
Message Length Description ............................................................................................... 8-1
Codabar............................................................................................................................... 8-2
Codabar Concatenation................................................................................................. 8-3
Code 39 ............................................................................................................................... 8-4
Code 32 Pharmaceutical (PARAF)................................................................................ 8-5
Full ASCII....................................................................................................................... 8-6
Code 39 Code Page ......................................................................................................8-6
Interleaved 2 of 5................................................................................................................. 8-7
NEC 2 of 5...........................................................................................................................8-8
Code 93 ............................................................................................................................... 8-9
Code 93 Code Page ....................................................................................................8-10
Straight 2 of 5 Industrial (three-bar start/stop)................................................................... 8-11
Straight 2 of 5 IATA (two-bar start/stop)............................................................................8-12
Matrix 2 of 5....................................................................................................................... 8-13
Code 11 ............................................................................................................................. 8-14
Code 128........................................................................................................................... 8-15
ISBT 128 Concatenation.............................................................................................. 8-15
Code 128 Code Page .................................................................................................. 8-16
GS1-128 ............................................................................................................................ 8-17
Telepen.............................................................................................................................. 8-18
UPC-A ............................................................................................................................... 8-19
UPC-A/EAN-13 with Extended Coupon Code...................................................................8-21
Coupon GS1 DataBar Output............................................................................................ 8-21
UPC-E0 ............................................................................................................................. 8-22
UPC-E1 ............................................................................................................................. 8-24
EAN/JAN-13 ......................................................................................................................8-24
Convert UPC-A to EAN-13 ..........................................................................................8-24
ISBN Translate ............................................................................................................ 8-26
EAN/JAN-8 ........................................................................................................................ 8-27
MSI .................................................................................................................................... 8-29
GS1 DataBar Omnidirectional ........................................................................................... 8-31
GS1 DataBar Limited......................................................................................................... 8-31
GS1 DataBar Expanded .................................................................................................... 8-32
Trioptic Code ..................................................................................................................... 8-32
Codablock A ...................................................................................................................... 8-33
Codablock F ...................................................................................................................... 8-34

vii
Label Code ........................................................................................................................ 8-34
PDF417 ............................................................................................................................. 8-35
MacroPDF417 ................................................................................................................... 8-35
MicroPDF417.....................................................................................................................8-36
GS1 Composite Codes...................................................................................................... 8-36
UPC/EAN Version........................................................................................................ 8-37
GS1 Emulation .................................................................................................................. 8-37
TCIF Linked Code 39 (TLC39) .......................................................................................... 8-38
QR Code............................................................................................................................ 8-38
QR Code Page ............................................................................................................8-39
Data Matrix ........................................................................................................................ 8-40
Data Matrix Code Page ...............................................................................................8-40
MaxiCode .......................................................................................................................... 8-41
Aztec Code ........................................................................................................................ 8-42
Aztec Code Page......................................................................................................... 8-42
Chinese Sensible (Han Xin) Code..................................................................................... 8-43
Postal Codes - 2D ............................................................................................................. 8-44
Single 2D Postal Codes:.............................................................................................. 8-44
Combination 2D Postal Codes:.................................................................................... 8-45
Postal Codes - Linear........................................................................................................ 8-48
China Post (Hong Kong 2 of 5).................................................................................... 8-48
Korea Post ................................................................................................................... 8-49
Chapter 9 - Imaging Commands
Single-Use Basis ................................................................................................................. 9-1
Command Syntax ................................................................................................................ 9-1
Image Snap - IMGSNP........................................................................................................ 9-1
IMGSNP Modifiers ......................................................................................................... 9-1
Image Ship - IMGSHP ......................................................................................................... 9-3
IMGSHP Modifiers ......................................................................................................... 9-4
Intelligent Signature Capture - IMGBOX ........................................................................... 9-10
Signature Capture Optimize ........................................................................................ 9-10
IMGBOX Modifiers....................................................................................................... 9-11
RF Default Imaging Device................................................................................................ 9-14
Chapter 10 - Interface Keys
Keyboard Function Relationships......................................................................................10-1
Supported Interface Keys ..................................................................................................10-3
Chapter 11 - Utilities
To Add a Test Code I.D. Prefix to All Symbologies........................................................... 11-1
Show Decoder Revision .................................................................................................... 11-1
Show Scan Driver Revision ............................................................................................... 11-1
Show Software Revision.................................................................................................... 11-1
Show Data Format............................................................................................................. 11-1
Test Menu.......................................................................................................................... 11-2
TotalFreedom ....................................................................................................................11-2

viii
Application Plug-Ins (Apps) ............................................................................................... 11-2
EZConfig-Scanning Introduction........................................................................................ 11-3
Installing EZConfig-Scanning from the Web................................................................ 11-3
Resetting the Factory Defaults .......................................................................................... 11-4
Chapter 12 - Serial Programming Commands
Conventions....................................................................................................................... 12-1
Menu Command Syntax .................................................................................................... 12-1
Query Commands ............................................................................................................. 12-1
Responses................................................................................................................... 12-2
Trigger Commands............................................................................................................ 12-3
Resetting the Custom Defaults..........................................................................................12-3
Menu Commands .............................................................................................................. 12-4
Chapter 13 - Product Specifications
Xenon 1900/1910 Corded Scanner Product Specifications .............................................. 13-1
Xenon 1902/1912 Cordless Scanner Product Specifications............................................ 13-2
Granit 1910i Industrial Corded Scanner Product Specifications........................................ 13-3
Granit 1911i Industrial Cordless Scanner Product Specifications ..................................... 13-3
CCB01-010BT Charge Base Product Specifications......................................................... 13-4
CCB02-100BT Industrial Charge Base Product Specifications ......................................... 13-5
Depth of Field Charts......................................................................................................... 13-6
Xenon B&W Scanner Typical Performance.................................................................13-6
Xenon B&W Scanner Guaranteed Performance .........................................................13-6
Xenon Color Scanner (Model COL) Typical Performance........................................... 13-7
Xenon Color Scanner (Model COL) Guaranteed Performance .................................. 13-7
Granit 1910i/1911i Scanner Typical Performance ......................................................13-8
Granit 1910i/1911i Scanner Guaranteed Performance .............................................. 13-8
Standard Connector Pinouts ............................................................................................. 13-9
Keyboard Wedge ......................................................................................................... 13-9
Serial Output................................................................................................................ 13-9
RS485 Output .............................................................................................................. 13-9
USB ........................................................................................................................... 13-10
Required Safety Labels ................................................................................................... 13-10
Chapter 14 - Maintenance
Repairs .............................................................................................................................. 14-1
Maintenance ...................................................................................................................... 14-1
Cleaning the Scanner .................................................................................................. 14-1
Cleaning the Window................................................................................................... 14-1
Health Care Housing ................................................................................................... 14-1
Inspecting Cords and Connectors ............................................................................... 14-2
Replacing Cables in Corded Scanners.............................................................................. 14-2
Replacing a Xenon Interface Cable.............................................................................14-2
Replacing a Granit Interface Cable.............................................................................. 14-2

ix
Replacing Cables and Batteries in Cordless Systems ...................................................... 14-2
Replacing an Interface Cable in a Base ......................................................................14-2
Changing a Xenon Scanner Battery ............................................................................ 14-3
Changing a Granit Scanner Battery.............................................................................14-3
Troubleshooting a Corded Scanner................................................................................... 14-3
Troubleshooting a Cordless System.................................................................................. 14-4
Troubleshooting a Base............................................................................................... 14-4
Troubleshooting a Cordless Scanner .......................................................................... 14-4
Chapter 15 - Customer Support
Technical Assistance......................................................................................................... 15-1
Product Service and Repair............................................................................................... 15-1
Appendix A - Reference Charts
Symbology Charts ...............................................................................................................A-1
Linear Symbologies .......................................................................................................A-1
2D Symbologies.............................................................................................................A-2
Postal Symbologies .......................................................................................................A-2
ASCII Conversion Chart (Code Page 1252)........................................................................A-3
Lower ASCII Reference Table.............................................................................................A-4
ISO 2022/ISO 646 Character Replacements ......................................................................A-7
Unicode Key Maps ............................................................................................................A-10
Sample Symbols
Programming Chart

x

1 - 1
1
Getting Started
About This Manual
This User’s Guide provides installation and programming instructions for the Xenon™ 1900 and 1910 corded area-imaging
scanners, the Xenon 1902 and 1912 cordless area-imaging scanners, the Granit 1910i and 1980i corded industrial scanners,
and the Granit 1911i and 1981i cordless industrial scanners. Product specifications, dimensions, warranty, and customer sup-
port information are also included.
Honeywell bar code scanners are factory programmed for the most common terminal and communications settings. If you need
to change these settings, programming is accomplished by scanning the bar codes in this guide.
An asterisk (*) next to an option indicates the default setting.
Unpacking Your Device
After you open the shipping carton containing the product, take the following steps:
• Check for damage during shipment. Report damage immediately to the carrier who delivered the carton.
• Make sure the items in the carton match your order.
• Save the shipping container for later storage or shipping.
Connecting the Device
Connecting with USB
A scanner or a cordless base can be connected to the USB port of a computer.
1. Connect the appropriate interface cable to the device first, then to the computer.
Corded Xenon Scanner
USB Connection:

1 - 2
2. If you are connecting a Granit scanner, make sure the cable is pushed tightly into the scanner. Loosen the locking plate
and slide it over the base of the cable connector to lock the cable in place. Tighten the screw.
Corded Granit Scanner
USB Connection:
CCB01-010BT Base
USB Connection:

1 - 3
Note: The power supply must be ordered separately, if needed.
3. If you are connecting a CCB01-010BT Base, make sure the cables are secured in the wireways in the bottom of the
cordless base and the base sits flat on a horizontal surface. If you are connecting a CCB02-100BT Base, see Mounting
a CCB02-100BT Base on page 1-9.
4. The scanner beeps.
5. Verify the scanner or cordless base operation by scanning a bar code from the Sample Symbols in the back of this
manual.
The unit defaults to a USB PC Keyboard. Refer to page 2-3 for other USB terminal settings.
For additional USB programming and technical information, refer to “USB Application Note,” available at www.honey-
wellaidc.com.
Connecting with Keyboard Wedge
A scanner or cordless base can be connected between the keyboard and PC as a “keyboard wedge,” where the scanner
provides data output that is similar to keyboard entries.
Note: The Granit 1980i does not support the keyboard wedge interface.
The following is an example of a keyboard wedge connection:
1. Turn off power and disconnect the keyboard cable from the back of the terminal/computer.
CCB02-100BT Base
USB Connection:

1 - 4
2. Connect the appropriate interface cable to the device and to the terminal/computer.
3. If you are connecting a Granit scanner, make sure the cable is pushed tightly into the scanner. Loosen the locking plate
and slide it over the base of the cable connector to lock the cable in place. Tighten the screw.
Corded Xenon Scanner
Keyboard Wedge
Connection:
Corded Granit Scanner
Keyboard Wedge
Connection:

1 - 5
Note: The power supply must be ordered separately, if needed.
4. If you are connecting a CCB01-010BT Base, make sure the cables are secured in the wireways in the bottom of the
cordless base and the base sits flat on a horizontal surface. If you are connecting a CCB02-100BT Base, see Mounting
a CCB02-100BT Base on page 1-9.
5. Turn the terminal/computer power back on. The scanner beeps.
6. Verify the scanner or cordless base operation by scanning a bar code from the Sample Symbols in the back of this
manual. The scanner beeps once. If using a Granit scanner, it also vibrates.
The unit defaults to an IBM PC AT and compatibles keyboard wedge interface with a USA keyboard. A carriage return (CR)
suffix is added to bar code data.
CCB01-010BT Base Keyboard
Wedge Connection:
CCB02-100BT Base Keyboard
Wedge Connection:

1 - 6
Connecting with RS232 Serial Port
1. Turn off power to the terminal/computer.
2. Connect the appropriate interface cable to the scanner.
Note: For the scanner or cordless base to work properly, you must have the correct cable for your type of terminal/computer.
Corded Xenon Scanner
RS232 Serial Port
Connection:
Corded Granit Scanner RS232 Serial
Port Connection:

1 - 7
3. If you are connecting a Granit scanner, make sure the cable is pushed tightly into the scanner. Loosen the locking plate
and slide it over the base of the cable connector to lock the cable in place. Tighten the screw.
Note: The power supply must be ordered separately, if needed.
4. If you are connecting a CCB01-010BT Base, make sure the cables are secured in the wireways in the bottom of the
cordless base and the base sits flat on a horizontal surface. If you are connecting a CCB02-100BT Base, see Mounting
a CCB02-100BT Base on page 1-9.
5. Plug the serial connector into the serial port on your computer. Tighten the two screws to secure the connector to the
port.
6. Once the scanner or cordless base has been fully connected, power up the computer.
This interface programs 115,200 baud, 8 data bits, no parity, and 1 stop bit.
CCB01-010BT Base
RS232 Serial Port Connection:
CCB02-100BT Base
RS232 Serial Port Connection:

1 - 8
Connecting with RS485
A Xenon scanner or cordless base can be connected for an IBM POS terminal interface. (This interface is not available in
the Granit devices.)
1. Connect the appropriate interface cable to the device, then to the computer.
Note: The power supply must be ordered separately, if needed.
2. Make sure the cables are secured in the wireways in the bottom of the cordless base and the base sits flat on a
horizontal surface.
3. Turn the terminal/computer power back on. The scanner beeps.
4. Verify the scanner or cordless base operation by scanning a bar code from the Sample Symbols in the back of this
manual. The scanner beeps once. If using a Granit scanner, it also vibrates.
For further RS485 settings, refer to RS485, page 2-2.
Corded Xenon Scanner
RS485 Connection:
CCB01-010BT Base
RS485 Connection: