Honeywell iPCAM-WI Camera User manual

i
iP PC CA AM M- -W WI I W Wi ir re el le es ss s I In nt te er rn ne et t
V
Vi id de eo o C Ca am me er ra a
Q
Qu ui ic ck k S St ta ar rt t G Gu ui id de e
POWER
NETWORK
800-02577-iPcam 6/09 Rev. A

iPCAM-WI Wireless Internet Video Camera – Quick Start Guide
1
Note: After approximately 10-minutes of inactivity, the Total Connect session will time out and disconnect.
1
After logging into Total Connect, click Video.
2
From the drop-down menu, choose the video system you want to view. Then click Launch Video
System.
3
If your PC does not have QuickTime®and Flash®You will be prompted to install or update these
applications.

iPCAM-WI Wireless Internet Video Camera – Quick Start Guide
2
4
Depending on the number of IP Cameras you have, you can scroll and click on the desired camera
thumbnail to enlarge it.
Note that, the thumbnails are a still picture based on the last update period. The enlarged video
on the left is real-time video.
5
When your session is over, in the video monitoring window click Close then log out of Total Connect.

TRADEMARKS
Honeywell is a registered trademark of Honeywell International Inc.
Flash is a registered trademark of Adobe Systems Incorporated, registered in the U.S. and other
countries.
QuickTime is a registered trademark of Apple Inc., registered in the U.S. and other countries.
All other trademarks are the properties of their respective owners.
2 Corporate Center Drive, Suite 100
P.O. Box 9040
Melville, NY 11747
Copyright©2009 Honeywell International Inc.
www.honeywell.com/security
Ê800-02577-iPcamkŠ
800-02577-iPcam 6/09 Rev. A