Honeywell 40015 User manual

Available at www.HoneywellStore.com
CEILING FAN AND LIGHT REMOTE
WITH WALL CONTROL
Model 40015 / Item # 0374122
User Guide
IMPORTANT SAFETY INSTRUCTIONS SS

1. Readandkeepthisinstructionsheetforfuturereference.
2. Pleasenotethatallfixedwiringappliancesshouldbeinstalledbyaqualified
electrician.
3. Thesupplytothereceivershouldbeconnectedonitsowncircuit.
4. Switchoffthepoweratthecircuitbreakerbeforeworkingonreceiverorceilingfan.
5. Thisunitistobeusedforthecontrolofaceilingfananditselectricalsourcemust
beAC110/120V,60Hz.
6. Donotinstallindamplocationorimmerseintowater.Forindooruseonly.
7. Donotusethisremotewithfansthathavepre‐installedremotecontrols.

CAUTION: To reduce the risk of fire or injury, do not use this product in
conjunction with any variable (rheostat) wall control.
RECEIVER INSTALLATION INSTRUCTIONS S- 

NOTE:Thisremotecanworkwithavarietyofhuggerfantypes,however,thereis
typicallyverylittlespaceinthehangerbracketareatoinstallareceiver.Therefore,
wedonotrecommendusingthisremotewithhuggertypeor5speedceilingfans.

1. Afterswitchingpoweroff@circuitbreaker,removeceilingfancanopyfromthe
mountingbracket.Disconnectexistingwiringbetweenceilingfanandsupplyat
electricaljunctionbox.
2. SlidethereceiverintothemountingbracketperFIG.1beingcarefulnot
topinchtheantennawire.
3. Thereceiverwillbeinsertedbetweenthedownrodandthemountingbracket.
4. MakewiringconnectionsperFIG.2.
5. Pushallconnectedwiresbackintothejunctionboxandreinstallthecanopyonto
themountingbracket.
6. ManuallysetfanspeedcontroltoHIGHandsetlighttoONusingthepullchains.

NOTE:Fortheremotetofunctionproperly,thefanmustbeonHIGHspeedand
lightsmustbeONtouse.
CAUTION: Incorrect wire connection can damage this receiver and could
cause injury or fire.
WALL CONTROL INSTALLATION INSTRUCTIONS )

1. Maketheelectricalconnectionstothewallcontrol(transmitter)unitasshowninFig3.
2. Carefullypushallconnectedwiresinsidewalloutletbox.
3. Securewallcontrolunitwith2screws(notincluded)previouslyremovedfromthe
existingwalloutletbox.
4. Afterinstalledwell,slidethePowerOn/Offswitchonwallcontrolto“ON”position.

NOTE:Beforeinstallingwallcontrol,slidetheswitchto“OFF”position.

ACTIVATING THE LEARNING PROCESS (SMART SYNC) S
       

NOTE:Thisremoteispre‐programmedfromthefactoryandshouldworkrightoutof
theboxoncethebatteryisinstalled.Should,foranyreason,re‐programmingbe
neededpleasefollowthelearningprocessasfollows:

1. Afterinstallationiscompleteandpoweristurnedon,pressandholdthe“FANOFF”
buttonfor3seconds.Fanwillturnonathighspeedandlight(ifinstalled)blinks3
times.ThisconfirmsthattheSMARTSYNCsettingisactive.Younowhave30seconds
topresstheFANOFFkey.TaptheFANOFFbuttonagaintoturnoffthefan.
2. Ifusercannotfinishthesettingwithinthe30secondstimeframethemainpower
mustbeturnedoffandre‐startedagain.Thiswillresettheunit.Repeatstep1until
theLEARNINGfeatureisactivatedasindicated.

NOTE:Usermustpress“FANOFF”keywithin30secondsafter
mainpoweristurnedon.

 
FANCANOPYMOUNTING
BRACKET
FIG1
 INSERTING RECEIVER
INTO CANOPY ASSEMBLY
 
WALLCONTROL LIVE (BLACK)
NEUTRAL(WHITE)
A
NTENN
A
LIGHT
(BLUE)
MOTOR
(BLACK)
MOTOR
(WHITE)
FIG2
CONNECTINGTHERECEIVER
TOTHEFAN

Available at www.HoneywellStore.com


FIG3
WIRINGDIAGRAM

WALL CONTROL OPERATION (FIG.4) )

High/Medium/LowSpeed–Taplightlytoturnthefanonathigh,mediumorlow
speedrespectively.

FanOff–Taplightlytothefanoff.

Light–Taplightlytoturnlightonoroff.

NOTE:Compatibleforusewithcompactfluorescentbulbs.

WalkAwayLightDelay–Taponce‐thelightandfanturnoffafter1minute.Light
onthefanblinksoncetoconfirmfunctionisactive.Pressanybuttontocancelfunction.

HomeShield–PressandholdtheLightandDelaybuttonsfor3seconds.Lightonthe
fanblinkstwotimestoconfirmfunctionisactive.Fanwillbeoffandthelightwill
randomlyturnonandoffwhileyouareaway.Todeactivatepressanybuttononce.













TROUBLE SHOOTING G
•Reviewreceiverwiring–isitwiredcorrectlyandreceivingpower?
•IsthefanspeedcontrolonHIandlightswitchintheONposition?
•Isthepoweron/offswitchonwallcontrolintheONposition?
•Arealltwobatteriesnewandfullycharged?
•Learningprocessbetweenfanandtransmittermaynothavebeensuccessful–see
step2underactivatingthelearningprocess
•Won’toperateatadistance–makesureantennawireisvisibleandnotobstructed

WARRANTY G
This product is warranted to be free from defects in material and workmanship, under normal use and
maintenance, for a period of (1) year from the date of purchase. This warranty shall not cover any
removal or reinstallation costs, and shall not apply to: (i) cosmetic damage, such as scratches, nicks
and dents; (ii) any alteration or improper repair, maintenance, handling, or installation; (iii) the
combination of the product with other systems or components; (iv) consumable parts, such as batteries,
including any deterioration or damage to the product caused by the use of faulty batteries; (v) damage
caused by accident, abuse, misuse, water, flood, fire, or other acts of nature
or external causes; (vi) damage caused by service performed by anyone
who is not an authorized service provider; or (vii) damage to a product that
has been modified or altered. Your sole and exclusive remedy for a breach
of warranty shall be replacement of the product. Alternatively, you may
return your product to the
retailer from which you made your purchase in accordance with applicable
return policies.
THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE
EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER
EXPRESS, IMPLIED, OR STATUTORY, INCLUDING ANY LIABILITY
ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE. THIS
WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE.
IN NO EVENT SHALL
ANY PARTY BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT,
OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE
USE, MISUSE, OR INABILITY TO USE THIS PRODUCT OR FROM
DEFECTS IN THE PRODUCT. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE
ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
To obtain warranty service, please call the customer service number below.
One of our customer
service representatives will assist you in determining whether you have a
warranty claim and, if so,
how to return your product. If you return your product for a warranty claim,
please securely pack
your product and include a copy of the original sales receipt, which is
required as the proof of
purchase for all warranty claims. You shall be responsible for shipment and
assume all costs and
risks associated with any product return.
TheHoneywellTrademarkisusedunderlicensefromHoneywell
InternationalInc.HoneywellInternationalInc.makesnorepresentations
orwarrantieswithrespecttothisproduct.
Thisproductismanufacturedfor:
HongKongChinaElectricApplianceManufactureCo.,Ltd.
3059ForestHillIreneRd,Ste103
Germantown,TN38138
1‐877‐580‐4359


ONOFF
H
M
L
OFF

FIG4
WALLCONTROLOPERATION


WalkAway Light Delay
Home Shield
Light High Speed
Medium Speed
Low Speed
Fan Of
f
Power On/Of
f
WALLCONTROL
GROUND / EARTH
RECEIVER
A
C
INPUT
A
C POWER
(WHITE) N
LIGHT
(BLUE)
MO
T
OR
(BLACK)
MOTOR
(WHITE)
TO CEILING FAN
A
C POWER
(BLACK)
RECEIVER LIVE
(BLACK)
A
C POWER
(BLACK) L

Available at www.HoneywellStore.com


FIG5
WALL CONTROL INSTALLATION
FEDERALCOMMUNICATIONSCOMMISSIONINTERFERENCE
STATEMENT
Thisequipmenthasbeentestedandfoundtocomplywiththelimits
foraClassBdigitaldevice,pursuanttoPart15oftheFCCRules.These
limitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidential
installation.Thisequipmentgenerates,
usesandcanradiateradiofrequencyenergyand,ifnotinstalledand
usedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.
However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthis
equipment
doescauseharmfulinterferencetoradioortelevisionreception,which
canbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrectthe
interferencebyoneormoreofthe
followingmeasures:Reorientorrelocatethereceivingantenna.Increase
theseparationbetweentheequipmentandreceiver.Connectthe
equipmentintoanoutletonacircuitdifferentfromthattowhichthe
receiverisconnected.‐‐Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
CAUTION:
ToassurecontinuedFCCcompliance:
Anychangesormodificationsnotexpresslyapprovedbythegranteeof
thisdevicecouldvoidtheuser'sauthoritytooperatetheequipment.
FCCID：KUJCE10005&KUJCE10006
ThisdevicecomplieswithPart15oftheFCCRules.Operationissubject
tothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevice
mustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.

One Year Limited Warranty
If you have questions regarding this product, before returning
to your retailer, call our customer service department toll free
at 1-877-580-4359
Model 40015 / Item # 0374122
User Guide (For Handheld Control)
ACTIVATING THE LEARNING PROCESS (SMART SYNC) S
       
1. Afterinstallationiscompleteandpoweristurnedon,removethebatterycoveron
transmitter.Insertbatteries(2AAA,included).

NOTE:Donotmixoldandnewbatteries,alkaline,standard(carbon‐zinc)or
rechargeable(nickel‐cadmium)batteries.

2. Turnoffthemainpowerandre‐startthepoweragain.Pressandholdthe“FANOFF”
buttonontransmitterfor3seconds.Fanwillturnonathighspeedandlight(if
installed)blinks3times.ThisconfirmsthattheSMARTSYNCsettingisactive.Younow
have30secondstopresstheFANOFFbutton.TaptheFANOFFbuttonagaintoturn
offthefan.
3. Ifusercannotfinishthesettingwithinthe30secondstime
framethemainpowermustbeturnedoffandre‐started
again.Thiswillresettheunit.Repeatstep2untilthe
LEARNINGfeatureisactivatedasindicated.

NOTE:Usermustpress“LEARN”keywithin30secondsafter
mainpoweristurnedon.Itisnotnecessarytoredothe
LEARNINGsettingifjustreplacingbatteries.


DIMMER ON/OFF SETTING (D/ O SWITCH)
)
SlidetheD/Oswitch,locatedinthebatterycompartment(See
FIG.1),tomatchthebulbtypeinyourfan.“D”isfor
incandescentbulbsand“O”indicatescompactfluorescentbulbs
(CFL).Useasmallscrewdriverorballpointpentoslidefirmlyleft
orright.

CAUTION: Incorrect bulb setting can damage the receiver.
TRANSMITTER OPERATION (FIG.2)
)

High/Medium/LowSpeed–Taplightlytoturnthefanonat
high,mediumorlowspeedrespectively.

FanOff–Taplightlytoturnthefanoff.

Light–Taplightlytoturnlightonoroff.

Dimmer–Holddownfor2secondstocyclethroughdimmer
setting.Thelightbuttonhasanautoresumefeaturesothelight
willre‐activateatthesamebrightnessasthelasttimeitwas
turnedoff.

NOTE:ThedimmerfunctiondoesnotworkwithCFLbulbs.

D/O–Setthelightforusewithincandescentbulbsorcompact
fluorescentbulbs(CFL).

NOTE:FactorydefaultsettingisCFL.



INSTALLING THE WALL MOUNT BRACKET
S
1. Locatewallmountinaconvenientlocation
2. Usetwoscrews(included)andwallanchorstoinstallwall
mountbracketasshowninFIG.3(Toolsrequiredforassembly:
Philipsscrewdriver,notincluded)




TheHoneywellTrademarkisusedunderlicensefromHoneywell
InternationalInc.HoneywellInternationalInc.makesnorepresentations
orwarrantieswithrespecttothisproduct.
Thisproductismanufacturedfor:
HongKongChinaElectricApplianceManufactureCo.,Ltd.
3059ForestHillIreneRd,Ste103
Germantown,TN38138
1‐877‐580‐4359

WALL PLATE
WALLCONTROL UNIT
WALLOUTLET BOX

Available at www.HoneywellStore.com


FIG1
REARVIEWOFTRANSMITTER–SHOWNWITH
BATTERYCOVERREMOVED





FIG2
TRANSMITTEROPERATION
WALL MOUNT
BRACKET
FIG3
 WALL MOUNT BRACKET
Printed in China
D/O (DIMMER SWITCH)
High Speed
Medium Speed
Low Speed
Fan Of
f
Light
Dimme
r