Honeywell FocusPRO 6000 Series User manual

Wireless Remote Control
For use with RedLINK™ devices
À utiliser avec les appareils RedLINK™
Para ser utilizado con dispositivos RedLINK™
69-2054EFS-05
Operating
Manual

Operating Manual
® U.S. Registered Trademark.
US Patent No. 6,595,430; 7,114,554; 7,274,972; 7,225,054; D520,386 and other patents pending.
All rights reserved.
Read and save these instructions.
Lea y conserve estas instrucciones
Veuillez lire et conserver ces instructions
M29985
Always press touchscreen buttons with your fingertip. Never
use sharp instruments, such as a pencil or pen.
Presione siempre los botones de la pantalla táctil con la punta
del dedo. Nunca utilice objetos con punta, como lápices o
bolígrafos.
Toujours appuyer sur l’écran tactile du bout du doigt. Ne jamais
utiliser d’objets pointus, comme la pointe d’un crayon ou d’un
stylo.
To clean the screen, lock the display and use a damp cloth.
Never use abrasive cleansers.
Para limpiar la pantalla, bloquéela y utilice un paño húmedo.
Nunca utilice limpiadores abrasivos.
Pour nettoyer l’écran, verrouiller l’affichage et utiliser un linge
humide. Ne jamais employer de nettoyants abrasifs.

Wireless Remote Control
1 69-2054EFS—05
Contents
How it works .....................................................................................................................2
Quick reference ...............................................................................................................4
System settings............................................................................................................... 5
Temperature control options (one thermostat) ................................................. 6
Temperature control options (multiple thermostats)...................................... 7
Temperature “hold”........................................................................................................ 8
Screen lock/unlock........................................................................................................9
Customizing features (setup menu).................................................................... 10
Battery replacement................................................................................................... 12
In case of difficulty ..................................................................................................... 13
Limited warranty.......................................................................................................... 14
Regulatory information............................................................................................. 43
Contents

Operating Manual
69-2054EFS—05 2
How it works
If you have one thermostat, you can
move the remote control around your
home (like a mobile thermostat) to make
sure the temperature is comfortable in
the room you’re using.
If you have multiple thermostats, you
can use the remote control to display
and adjust temperatures in each room
independently. (See next page.)
Wireles
s
remote
control
Thermostat
Optional
outdoor
air senso
r
M29986
Heating/cooling
equipment
Thermostat
Thermostat

Wireless Remote Control
3 69-2054EFS—05
About your new thermostatHow it works
If you have only one thermostat
Temperature is measured at thermostat
or remote control, as you choose. You
can move the remote control as needed,
so the room you are using maintains a
comfortable temperature (see page 6).
If you have multiple thermostats
Temperature is measured at each
thermostat. Press TOGGLE ZONE buttons
to choose which room to display and
adjust (see page 7).
SET TO
READ TEMP FROM…
78 78
THIS DEVICE
THERMOSTAT
M28884
SET TO
TOGGLE ZONE
77 78
BEDROOM
M28885

Operating Manual
69-2054EFS—05 4
HEAT
AM
OUTDOOR
SET TO
READ TEMP FROM…
REPLACE
BATTERY
TOGGLE ZONE
OFFCOOL
8:03
78
58
78
THIS DEVICE
LIVINGROOM
THERMOSTAT
SCREEN
UNLOCKED
M28883
Quick reference to display screen
System setting
Current time (set at thermostat)
Inside temperature
Note: First press of screen only
turns on backlight.
Outside temperature
(appears only if outdoor
sensor is installed)
Outside humidity
(Press to display
for 5 seconds)
If “No Signal” appears here,
check to make sure there are
fresh batteries in the thermo-
stat, and HVAC power is on.
Screen
lock/unlock
Temperature
setting
Replace battery
warning
Temperature
sensor source
(appears if you
have only one
thermostat)
Zone control
(appears only if
you have more
than one ther-
mostat)

Wireless Remote Control
5 69-2054EFS—05
System settings
Press to select Press a SYSTEM button to select:
• Heat: Thermostat controls only the heating
system.
• Cool: Thermostat controls only the cooling
system.
• Off: Heating and cooling systems are off.
Press and hold HEAT or COOL for 3 seconds
to select Auto Changeover (thermostat
automatically selects heating or cooling
depending on the indoor temperature).
In Auto Changeover mode, you can press
HEAT or COOL to display or adjust the settings
for each system.
To exit Auto Changeover mode, press and
hold HEAT or COOL for 3 seconds.
Note: The Auto Changeover option
is available only if programmed by
the system installer.
Note: Emergency Heat can only be
set at the thermostat.
Press and hold either to select AUTO CHANGEOVER
HEAT
AM
OFFCOOL
8:03
M28886
HEAT
AM
OFFCOOL
8:03
AUTO
M28887

Operating Manual
69-2054EFS—05 6
OUTDOOR
SET TO
READ TEMP FROM…
78
58
78
THIS DEVICE
THERMOSTAT
M28888
Temperature control options (one thermostat)
Display shows temperature at
selected device
Press to choose temperature
measurement device
Note: This option will not appear if you have a
zone system (more than one thermostat). In zone
systems, temperature is always measured at the
thermostats.
Both the thermostat and the remote control
have built-in temperature sensors. Press
a button to choose whether the system
responds to temperatures at the thermostat,
or at the location of the remote control.
If you use the remote control to measure
temperature, keep it in an upright position
in an area with good air circulation. Do not
place it near sources of heat or cold air. Keep
away from air ducts, direct sunlight, appli-
ances and electronic devices.

Wireless Remote Control
7 69-2054EFS—05
OUTDOOR
SET TO
TOGGLE ZONE
78
58
78
LIVINGROOM
M28889
Temperature control options (multiple thermostats)
Display shows temperature in
selected zone
Press to select a thermostat zone
If you have a zone system (more than one
thermostat), you can display and adjust the
temperature in each zone from the remote
control.
Press the arrow buttons until the thermo-
stat zone you want is displayed. After a short
delay, the remote will retrieve information,
then display the current temperature in that
zone.
At the remote control you can change the fol-
lowing settings for each zone independently:
• Temperature
• System setting (heat/cool)
• Temporary hold
• Permanent hold
(Fan operation and program schedules can
be changed only at the thermostat.)

Operating Manual
69-2054EFS—05 8
M28891
HEAT
DONE
CANCEL
AM
HOLD UNTIL
10:15
PERM. HOLD
M28890
OUTDOOR
SET TO
72
58
78
Temperature “hold” (programmable thermostats only)
1Press to adjust temperature
2Set temporary hold time
period OR press PERM. HOLD
Press sor tto adjust the temperature.
Temporary hold:
Press sor tto set the “Hold Until” time.
When the timer expires (or when you press
CANCEL), the temperature will revert to the
setting you’ve programmed at the thermo-
stat.
Permanent hold:
Press PERM. HOLD to maintain the new tem-
perature permanently. The temperature will
remain as you set it until you press CANCEL to
revert to the setting you’ve programmed at
the thermostat.
Note: If you have a zone system (more than one
thermostat), Hold will only apply to the zone
displayed at the bottom of the screen. Scroll to
another zone to change the temperature in that
zone (see page 7).